Screen printing machine is a screen printing plate printing machine, it is the printing of text and images of the machine, now commonly used screen printing machine is a fully automatic screen printing machine, the whole process can be automated, very simple, the following for you to introduce how to operate the screen printing machine:
1, the operator before starting the machine, you should wear a good protective mask, rubber gloves.
2, the power switch from the green 0 to white 1, turn on the main power supply, wait for the computer to start automatically, after the start of the printing control program will be automatically loaded.
3, take out the corresponding type of screen plate, fixed in the screen plate fixed frame, load the machine and press the F4 key to lock the screen plate. At the same time, you can hear a "pop" sound, with the hand can feel the stencil will not be able to pull out.
4, press the operation panel of a cycle of buttons, loaded with a squeegee test print, and adjust the squeegee stroke position and pressure, foot pedal once the foot switch to complete a screen printing operation.
5, test printing is completed, to determine the normal printing operations can be formally started.
6, printing work is completed, the operator turned off the power, clean the machine and the stencil.
Second, the operation of the screen printing machine to pay attention to what matters
Screen printing machine as a printing machine, in the process of using a lot of attention to the place, the screen printing machine operation precautions are:
1, screen printing operators should wear protective masks and other protective equipment to avoid causing injury.
2, screen printing machine operation site using ink, open oil water, acetone and other solvents barrels, pots, bottles, cans to seal the lid, set up a secondary container, and place the number of not more than the amount of the shift.
3, the operator needs to be trained to work on the job, in the absence of familiar with the performance of the machine before the order of operation shall not be unauthorized to start the machine.
4, before work must open all the ventilation equipment, and keep running normally.
5, screen printing machine on the safety guards should not be unauthorized to change or remove, should check the safety devices before work is normal.
6, equipment in the commissioning, use process, such as abnormalities should be found immediately cut off the power supply, and timely maintenance, maintenance, replacement version of the inspection and maintenance operations must be disconnected from the power supply.
7, a long period of downtime to remove the screen plate or completely covered to prevent dust attached to the screen, affecting the next operation.