(a) The content of company-level safety education:
1, the situation of production safety in the unit and basic knowledge of production safety;
2, relevant national laws and regulations and safety standards;
3, the unit's rules and regulations on production safety and labor discipline;
4, the basic rights and obligations of employees;
5, cases of accidents in the unit or related similar units;
6, emergency rescue plans for major hazards and rehearsal and preventive measures.
5. Accident cases of the unit or similar units;
6. Emergency rescue plan for accidents involving major sources of danger and the contents of the plan's drills and preventive measures;
7. Other contents that need to be trained.
(B) Workshop-level safety education content:
1, the environment of the workplace of employees and the basic situation of dangerous and harmful factors;
2, the type of work engaged in the job safety duties, operational skills and mandatory standards;
3, employee self-help, mutual rescue, first aid methods of evacuation and treatment of on-site emergencies;
4, The use and maintenance of safety equipment and facilities, personal protective equipment;
5, the department's production safety and there are rules and regulations;
6, measures to prevent accidents and occupational hazards and should pay attention to safety matters;
7, the relevant accident cases;
8, other content that needs to be trained, informed
(C) Shift-level safety Education content:
1, job safety operation procedures;
2, safety and occupational health precautions for the interface between jobs;
3, relevant accident cases;
4, the performance of the equipment and the use of safety devices, tools or appliances;
5, the performance of the labor protective equipment (appliances) and the correct use of methods;
5, the performance of the labor protective equipment (appliances) and the use of Methods;
6, accident emergency response skills;
7, other content that requires training.
2. Safety Education in Iron and Steel Mills
Safety Management in Iron and Steel Enterprises *** 8 chapters, respectively, Introduction, Identification of Hazardous Sources, Risk Evaluation and Control, China's Occupational Health and Safety Laws, Regulations and Standards, Guidelines and Objectives Management, Establishment of a Documented Management System, Control of Safety Operations, Monitoring and Measurement, Auditing and Review of Safety Operations.
Safety procedures for ironmaking, steelmaking and rolling are appended to the book. Extended information From the identification and risk evaluation of risk factors and hazards, the risks in the safe production of iron and steel enterprises are mainly smelting injuries, mechanical injuries, electrical injuries, fire and explosion prevention, poisoning and asphyxiation, lifting and transportation injuries and injuries from special equipment, as well as occupational disease injuries.
In order to realize safe production should be effective control of the above risks. Smelting injuries are mainly burns, which are in 3rd place after mechanical injuries and blows.
Smelting injuries come from high-temperature iron, steel and slag spatter, dolomite, lime, calcium carbide, steam, hot water, hot steel parts, gas, oxygen and other fire burns, chemical and electric arc burns. Injuries occur mostly in coking, sintering, ironmaking, steelmaking, continuous casting and rolling processes.
The main control measures are mainly: provide labor protection supplies according to regulations, strengthen individual protection; formulate and implement safe operating procedures, strict standardization of operations; strengthen detection, strict prevention of waste steel with water and explosives; the use of methods such as testing and probing, to prevent equipment aging and breakage. Baidu encyclopedia - steel enterprise safety production management.
3. Seek some common sense of safety and production in the steelmaking plant
The first steelmaking plant through the A management mode of learning, improve the ideological understanding, determined to comprehensively improve the safety management work. On the basis of the original inspection system, re-modified and formulated a new safety inspection system, further refined the inspection system, determined to the first steelmaking plant's safety management work to a new level.
First of all, a safety inspection system was developed, requiring each safety officer to make more efforts every day from the wearing of labor protection equipment to correcting the "three violations" behavior, and
The inspection of the gas system and the control of smoke. The company's safety management system has been designed to ensure the safety of all employees, and to ensure that all employees have a clear responsibility for the safety of the company and are aware of their goals. The company has also developed new inspection standards for the "five professional inspection teams" of the plant. Monday 8:30 a.m. overhead crane inspection, the requirements of the overhead crane safety devices, mechanical parts, electrical parts and overhead crane hygiene inspection, and each of which has set the inspection standards. Spreader and electrical inspection was carried out on Wednesday at 8:30 a.m. Spreader inspection parts: overhead crane wire rope, gantry hook, hook head, wire rope buckle, clamp, fork, chain sub ring, ladle, ladle trunnion. Electrical inspection parts: high-voltage distribution room, low-voltage distribution room, transformer room, pump room, welding machine, cooling fan for inspection, each set up inspection standards. Friday morning at 8:30 a.m. for the plant, gas professional inspection. Gas professional inspection part: gas pipeline in the area under the jurisdiction of the plant. Plant inspection parts: the main structure of the plant, plant columns, beams, steel structure, overhead rail, roof tiles, and then in accordance with the inspection program, fill out the form, really do check the project clearly, the responsibility for the implementation of the in place, hidden defects rectification in a timely manner.
Through the results of several inspections, greatly improved the standard of the professional inspection, to achieve the purpose of the inspection, really do to prevent problems before they occur, and further ensure the safety of production.
4. In the ironworks work need to pay attention to what safety issues
1 into the post or work site, construction site, must be in accordance with the provisions of the correct wearing of labor insurance products and protective equipment, female workers with long hair must be pulled into the cap; 3.
2 without the three-level safety education or safety test failed personnel are not allowed to work. Into the factory new workers, internship, training or temporary participation in the labor and change the type of work, long-term sick leave, incident, maternity leave to return to work personnel, special operators.
The safety education or professional training must be qualified by the examination before being allowed to work; 3.3 4 hours before work and work is strictly prohibited to drink alcohol, violators are seriously dealt with.
The work should be concentrated and stick to the post. Not allowed to do things unrelated to work, not allowed to bring children or unrelated people into the workplace; 3.
4 before work must be a detailed inspection of equipment, facilities and workplace, found anomalies, should be immediately excluded or reported to deal with; 3. 5 any unit or individual shall not change the state of the safety protection facilities without authorization, such as the need for work should be reported to the safety management personnel and accompanied by safety precautions. Only after permission to work; 3.
6 job operators must be familiar with the use or operation of equipment performance, process requirements and operating procedures, precautions. The equipment should be operated by a person, without the permission of the person in charge, it is strictly prohibited for others to use it without authorization.
During the apprenticeship period, the equipment shall not be operated by the apprentice alone; 3. 7 When entering the gas area (system), CO concentration monitoring must be carried out to confirm that the content does not exceed the standard or that there are precautionary measures before entering and being supervised by a person, and it is strictly prohibited for a single person to enter the gas area (system), and the site shall be evacuated quickly after the completion of the operation, and the number of people shall be counted, and it is not allowed to be retained; 3.
8 Running equipment and Rotating parts, moving parts, there should be protective isolation devices, are not allowed to stand or touch the rotating parts, are not allowed to stand in front of the possible fracture flying objects, debris; 3. 9 high altitude (place) work or multi-layer three-dimensional intersection of operations, there should be a special guard or command contact, is strictly prohibited more than one person command.
Aerial (place) work must be fastened with a safety belt (more than 2 meters); 3. 10 All electrical equipment, in addition to special provisions, there must be a reliable grounding (zero) device and to maintain the continuity of non-electric repair personnel are not allowed to dismantle, installation, repair of electrical equipment and wiring; 3.
11 the distribution room, main control room, operation room, hydraulic station, cab, dispatching room and other vital departments, non-staff, without permission, are not allowed to enter. Staff, without permission, are not allowed to enter; 3. 12 power distribution room, main control room, operation room, hydraulic station and all non-fire site is not allowed to start a fire, such as the need to start a fire should be in accordance with the relevant provisions of the fire certificate, and take the appropriate safety measures before starting a fire; in the gas area of the fire, in addition to applying for a fire certificate in accordance with the relevant provisions of the fire certificate, and to take the appropriate safety measures, but also to ask the gas station personnel to monitor the scene before starting a fire; 3. Only then can the fire; 3.
13 blasting operations or in the place of poisoning, asphyxiation hazard may operate, must be reported to the safety and security and other relevant departments for approval, and take reliable measures before operating; 3. 14 fire equipment should be responsible for the proper storage of a person is strictly prohibited to casually move or divert it for other purposes.
Its placement around the place, are not allowed to pile up other unrelated items, and should be regularly inspected and replaced; strictly prohibited from occupying the fire escape; 3. 15 special equipment should be set up accounts, and do a good job of regular inspection, special equipment operators must be qualified by the examination, and hold the state-issued special operating license before taking up their duties, and strictly abide by the safety regulations; 3.
16 occurrence of After the accident, the post staff should rescue in time, and report to the leadership and relevant departments, the relevant departments received the report, should be in accordance with the type and nature of the accident quickly start the corresponding emergency rescue plan to organize and implement rescue, the principle is: first to ensure the safety of the people, followed by the protection of the company's important equipment, and as soon as possible to resume production, to avoid the accident expanding and spreading; 3. 17 all posts should strictly abide by the shift handover system, the shift The situation that occurs in the shift should be recorded truthfully, and seriously conveyed to the successor, it is strictly prohibited to be ambiguous and conceal the facts; 3.
18 crossing the railroad crossing, we should strictly abide by the "one stop, two look, three pass" system, not allowed to walk on both sides of the railroad within 1. 5 meters, it is strictly prohibited to rush across the crossing, and it is strictly prohibited to walk or linger on the railroad; 3.
19 "safety production everyone has the responsibility", all employees should be in accordance with the requirements of the "Work Safety Law" to conscientiously fulfill their obligations, enjoy the rights due, the right to dissuade, correct, stop all kinds of violations of risky behavior, and have the obligation to conscientiously comply with the safety procedures of the type of work. If it is useful, give a favorable comment O(∩_∩)O~~.
5. Anyone help to write a steel plant safety accidents thoughts
The most precious thing for people is life, and life is only once for everyone."
This is a quote from "How Steel is Made", which is Paul's heartfelt sentiment. Yes, everyone's life is only once, but there are a lot of people do not know how to cherish their lives, not only did not cherish life, but also because of one after another traffic accidents and lost their lives.
Life traffic safety and our relationship is very close, it is like our friends day and night to guard our side, educate us, advise us. Life is precious, a person's life is only once life, so we should cherish life.
And pay attention to traffic safety is also part of the treasure life, there are many people think, running red lights, drink and drive, driving a motorcycle does not wear a helmet, driving a car does not fasten the seat belt, driving a car on the phone, driving fatigue ...... Although this is a small problem, but many traffic accidents are caused by these small problems and happen. Last time, I went out shopping with my family, a motorcycle tipped over under a big truck, the driver and passenger on the motorcycle were seriously injured, both head injuries, only because of the lack of helmets, which is a serious car accident, coupled with the big truck ran a red light, and that's it, a serious traffic accident happened.
Some people think that the occurrence of these accidents, because the day there is bad luck, bad luck; there are also some people think, that is to see whether you usually worship God, worship Buddha, praying for heaven to bless you peace; more some people think that all of this is arranged by heaven ...... In fact, these think that all are wrong, all are fanatical The real reason is that people do not consciously abide by the traffic rules, are violating the traffic rules, therefore, this together with the traffic accidents, in fact, are people's hands to create, but also personally experienced. Although God is fair, but also stingy, he only gives people a life, only let people have a life, after this time, people will never have a life, therefore, we have to cherish life, and cherish life is the basic to pay attention to safety, to protect their own safety.
Care for life, pay attention to safety, together to make their life flower more bright and beautiful.
6. I am a steel mill workers, urgent need of an article on steel mill safety, thank you
Safety is benefit, safety is political.
Success is also safety, failure is also safety. Enterprises invest the most in safety, emphasize it the most, and assess it the most.
Safety is related to the long-term stability of the enterprise, and even more related to the immediate interests of employees. The party work should strive to achieve "three integration", integrated into the production and operation of the best safety work is the best carrier.
The party committee of the steel plant promotes the safety culture from the height of politics, strictly standardizes the work of safety, strengthens the concept of safety "four no's", and strives to create a happy and harmonious steelmaking environment.
The situation of safety production in the steel plant is exceptionally severe, and the task is very arduous. In order to protect the lives of workers, effectively prevent accidents, to ensure the smooth realization of the annual production and operation of the task, the plant in all workers to vigorously implement the safety "four no", that is, "illegal command, not to implement; safety work is not in place, not operating; safety measures are not implemented, not overhaul; safety is threatened, not production. The safety culture core concept of "threatened, not production".
The staff safety and self-prevention consciousness further enhancement, safety professional skills and emergency risk avoidance ability significantly strengthened, safety standardization work steadily advancing, "cherish life, do not forget the safety" of the increasingly strong safety culture atmosphere. First, improve employee self-protection and preventive awareness is the implementation of safety "four" cultural concept of the core human life is the most valuable.
The plant insisted that "all life safety system measures to be strictly implemented, all possible accidents caused by hidden safety hazards to be strictly prevented, all violations of safety procedures to be seriously assessed" of the "three strict" work ideas, and strive to prevent accidents from the source of the mind of the workers. We will endeavor to prevent accidents from the source of workers' thoughts. The company's "four no's" concept of safety has been in the minds of the people.
Plant leaders at both levels insisted on scheduling meetings, workshop meetings, team pre-shift meetings, production meetings to instill the concept of safety "four no" to the workers, hanging safety slogans in key positions throughout the plant, the key source of danger, the production of safety boards to publicize the momentum. At the same time, we collect typical cases of "Four No's of Safety", and organize front-line workers to go into workshops and groups to give speeches to educate workers on the concept of "Four No's" of safety in a personal way, and continuously improve the safety awareness of self-protection and precautionary approach of the post workers. The company's website has been updated with the latest information on the company's website.
Strengthen safety training. Regularly organize workshop, section, team level safety officer, team leader, youth safety post chief for safety "four not" thematic training, focusing on strengthening safety skills, safety awareness of the formation of education, to break the post workers "shortcuts, trying to save trouble, afraid of trouble, hold a fluke" of the illegal risk-taking ideas. The company's website has been updated with the latest information on the company's website, including its website.
On the one hand, the company invited departmental leaders to make a comprehensive and systematic explanation of the situation of production safety, combined with the characteristics of the post to inspire the idea of safety management, improve the ability of safety management, and set up the "first safety, after the operation" of the work of the idea. On the other hand, the professional medical personnel from the safety protection, emergency escape, safety rescue and other aspects of the special training of safety knowledge, to reduce or avoid the harm caused by safety accidents.
At the same time, the organization of grass-roots workers' representatives to participate in the plant safety conference, safety inspection activities, the whole process of participation in the safety management of the steel plant, deepen the knowledge and understanding of the safety culture of the steel plant, in practice, feel and improve the ----------- The article is a little bit long, you need to your mailbox.
7. Rolling mill work summary on transportation and safety
Transportation issues needing attention: loading the car to be neat, can not exceed the height and width, but also to be tied to prevent discarding, to prevent the emergency kill gate caused by the bar through the carriages to injure people, and other accidents, the rules of the road to be strictly adhered to in the case of not violating the traffic, fast pulling and running to increase the efficiency.
Write the more full the more detailed the better, of course, this is all done under the leadership of the unit, other dry energy should also piggyback on the point of writing, especially with a number of sentences such as a few years, a few months, a few days did not have a major accident, and so on. To highlight the distinctive columns, of course, and peers accordingly contrast, but also write due to the above do good, scientific use of time, so that the benefits of the plant year after year increase in production, sub: the human face, income, plant appearance, plant income, and the development of the plant, the past how, how now, the future planning, etc. can be written, well not to say, and then say is that I write the work of the summary of the heh! Can be expanded around the above outline to fill in or supplement the writing, the organization should be clear, the language should be fluent, and so on! What do you say?