The Regulations on the Management of Waste Electrical and Electronic Products Recycling came into effect on June 5438+ 10/0.
After the Food Safety Law of People's Republic of China (PRC) and Hygienic Standard for the Use of Additives in Food Containers and Packaging Materials (GB9685-2008) were formally implemented in June this year, the plastic composite film for packaging, bag dry composite and extrusion composite (GB/TL 0004-2008) and melamine formaldehyde molded products for food containers and packaging materials were published. The compulsory national standard "General Technical Requirements for Plastic Disposable Tableware" (GBl8006. 1-2009-2009) and other three standards will be implemented in the next two years, and dangerous packaging and over-packaging that endanger consumers' health will be intercepted by standard doors.
Plastic products for food such as baby bottles will be banned from sale without QS certification.
2008/12/2 Hangzhou Inspection and Quarantine Bureau made new regulations on the inspection of plastic products in enterprises.
2008/ 12/02 Shenzhen plans to legislate to prohibit the free distribution of plastic shopping bags.
2008/ 12/02 Hong Kong Constitutionalism: 50 cents per plastic shopping bag is environmentally friendly.
The State Council will implement a paid use system to restrict the production and sale of plastic shopping bags.
2008/ 12/02 The national standard for plastic shopping bags was completed in March.
2008/ 12/02 Plastic Restriction Order gave birth to the national standard for plastic bags, and the draft for comments was released at the end of this month.
The plastic products industry needs to be repositioned urgently.
Composite films and bags for packaging have the first general national standard.
2008/ 12/02 Yiwu New Policy on Customization of Export Procedures for Plastic Products.
2008/ 12/02 Revision of Plastic Futures Contract and Announcement of Relevant Implementation Rules
In 2008/ 12/02, the processing trade policy was greatly adjusted and the export cost jumped by 30%.
2008/ 12/02 Xi An issued hygiene requirements, and it is forbidden to put bowls in plastic bags.
2008/ 12/02 Germany: EU REACH regulations are not conducive to the recycling of waste plastic products.
San Francisco: Proposed legislation to ban the use of ordinary plastic bags.
2008/ 12/02 "Shenzhen Plastic Bag Free Day" was established.
2008/ 12/02 British regulations on plastic packaging waste recycling must meet the standards.
2008/ 12/02 The United States extended the duty-free policy for pets imported from three Asian countries.
2008/12/02 polypropylene tariff adjustment in 2007
In 2008/ 12/02, the EU will adopt the regulations on technical barriers to environmental protection trade.
2008/ 12/02 Development Status and Utilization Regulations of Foreign Recycled Plastics Industry
2008/12/2 Shaanxi Province implemented the market access system for 39 kinds of food plastic products.
China new standard for plastic door and window profiles will be implemented soon.
2008/ 12/02 The European Commission passed a bill to increase the proportion of recycled plastic waste.
There will be a national policy on plastic recycling.
2008/ 10/08 Chlor-alkali Association: The cancellation of protection affects the new capacity of PVC.
Circular of the Ministry of Finance on Strengthening the Supervision of Value-added Tax on Enterprises Recycling Renewable Resources 20 10- 12-27
Announcement 20 10- 12-22 on Issuing the Guide for Qualification Examination and Licensing of Waste Electrical and Electronic Products Disposal Enterprises
Measures for the Administration of Public Security in Motor Vehicle Maintenance Industry and Scrap Motor Vehicle Recycling Industry 2010-12-13
Public list of designated processing and utilization units applying for importing waste hardware and electrical appliances 201111-30.
Ministry of Environmental Protection: Guidelines for Establishing Data Information Management System and Submitting Information for Waste Electronic Processing Enterprises 2010-1-19
The Ministry of Environmental Protection issued the Guidelines for Auditing Subsidies of Waste Electronic Products Disposal Enterprises 2010-1-19.
The Ministry of Environmental Protection issued the Planning Guide for Disposal and Development of Waste Electrical and Electronic Products 2010-1-18.
Opinions on Implementing the Regulations on the Recycling and Disposal of Waste Electronic Products +00- 10- 12
Announcement No.2010-10-9 of the Ministry of Environmental Protection on Abandoning PET Scrap Ships
Measures for Comprehensive Utilization of Renewable Resources in Gansu Province 20 10-9-25
The National Development and Reform Commission issued the Catalogue of Disposal of Waste Electrical and Electronic Products (First Batch) 20 10-9- 15.
The National Development and Reform Commission answered a reporter's question on the publication of the catalogue for the disposal of waste electrical and electronic products (the first batch) 20 10-9- 15.
General Administration of Quality Supervision, Inspection and Quarantine: Announcing the effective registration qualification of foreign suppliers of solid waste that can be used as raw materials 20 10-8-25.
The General Administration of Quality Supervision, Inspection and Quarantine announced the list of the first batch of domestic consignees whose registration of imported waste materials was cancelled or cancelled on 20 10-8-25.
Notice on Printing and Distributing the Implementation Measures for Pre-approval of Value-added Tax on Renewable Resources in Gansu Province 2010-819
Detailed explanation of the subsequent policy changes related to VAT reform in 2009 20 10-8- 13
Notice of the Ministry of Environmental Protection on Approving the Designated Processing and Utilization of Waste Motors 20110-8-10
Technical specification for scrap car recycling and dismantling enterprises 20 10-8-2
Notice of the Ministry of Commerce and the Ministry of Finance on Launching the Pilot Work of Upgrading and Reforming Scrap Car Recycling and Dismantling Enterprises 20 10-8-2
Technical Policy Outline for Comprehensive Utilization of Resources in China 20 10-7-28
The head of the Finance Department of the Ministry of Commerce answered a reporter's question on the cancellation of export tax rebate for some commodities 20 10-6-24.
Circular of the Ministry of Finance and State Taxation Administration of The People's Republic of China on Cancelling Export Tax Refund for Some Commodities 20 10-6-23
Guiding Opinions of the Ministry of Commerce on Further Promoting the Development of Renewable Resources Recycling Industry 20 10-6-9
The responsible persons of the Legislative Affairs Office of the State Council and the Ministry of Environmental Protection answered the reporter's questions on the Regulation on the Management of the Recycling of Waste Electrical and Electronic Products 20 10-6-7.
The National Development and Reform Commission and the Ministry of Finance plan to build 30 "urban mineral" demonstration bases 20 10-5-27 in five years.
Development and Reform Commission: Promoting the Comprehensive Utilization of Bulk Solid Waste and Promoting the Development of Resource Recycling Industry 20 10-5- 19
Circular 20 10-5- 13 on the development of urban mineral demonstration bases
The responsible person of the National Development and Reform Commission answered a reporter's question on increasing investment and financing policy support to promote the development of circular economy 20 10-5- 10
Circular 20 10-5-4 on Printing and Distributing the Technical Guide for Domestic Waste Treatment
Four departments issued investment and financing policies and measures to support the development of circular economy 20 10-4-29
Announcement No.21No.20 10 of the General Administration of Customs on Classified Shipping Management of Key Solid Wastes 20 10-4- 1
[Exclusive] Ministry of Industry and Information Technology: Vigorously Promote the Development of Resource Recycling Industry 20 10-3-29
Opinions of Zhongshan Municipality on Promoting the Healthy Development of Renewable Resources Industry 20 10-3- 19
General Administration of Inspection and Quarantine: Suspension of 3 1 Registration Qualification of Foreign Suppliers of Imported Solid Waste 20 10-3- 18.
Announcement No.20 10 of the General Administration of Customs 16, Relevant Provisions on Issuing the Declaration of Classification Specifications for Some Imported Solid Wastes 20 10-3- 12
The General Principles of Technical Specifications for the Circulation of Second-hand Equipment was officially implemented today.
Ministry of Environmental Protection: The new standard for medical wastes and waste lead batteries, which came into effect on March 1 0-31,is 201.
2065438+20 1 February1national environmental protection standard for lead smelting industry.
Zhou Changyi, Ministry of Industry and Information Technology: Promoting circular economy and promoting the development of renewable resources industry 20 10- 1- 14
Announcement 20 10- 12 on the change of some customs commodity numbers and customs commodity names in the Catalogue of Imported Waste Management
Announcement 20 10- 12 on Issuing the Technical Specification for Pollution Control of Waste Electrical and Electronic Products.
1 GBn84-80 hygienic standard for polyethylene molded products
2 GBn85-80 Hygienic Standard for Polypropylene Molded Products
Hygienic standard for 3 GBn86-80 polystyrene molded products
4 GBn87-80 hygienic standard for melamine molded products
5 GB3806-83 PVC plastic sandals
6 GB3807-83 PVC microporous plastic slippers
7 GB3830-83 soft PVC calendered film (sheet)
8 GB4085-83 semi-rigid PVC block plastic floor
9 GB42 17-84 Nominal outside diameter and nominal pressure of thermoplastic pipes.
10 GB42 19-84 rigid PVC pipe for chemical industry
1 1 GB4220-84 rigid PVC pipe fittings for chemical industry
12 GB4454-84 rigid PVC sheet
13 GB4455-84 polyethylene blown film for agriculture
14 GB4456-84 polyethylene blown film for packaging
15 GB5664-85 high density polyethylene monofilament
16 GB5736-85 calcium-plastic corrugated box for pesticides
17 GB5737-85 food plastic turnover box
18 GB5738-85 plastic turnover box for beverages
19 GB5739-85 beer plastic turnover box
20 GB5836-86 rigid PVC pipes and fittings for building drainage
2 1 GB6668-86 PVC knitted fabric-based foamed artificial leather
22 ZBY2800 1-85 rigid PVC stair handrail
23 ZBY28002-85 phenolic tape bearing bush
24 ZBY28003-85 Calendered PVC hard sheet for food packaging
25 SG8-67 PVC plastic sole
26 SG22-73 PVC plastics for cable industry
27 SG78-74 rigid PVC pipe
28 SG79-74 flexible PVC pipe
29 SG80-75 polyethylene pipe
30 SG83-75 PVC artificial leather
3 1 HG2-82 1-75 Pearlescent PMMA
32 SG 124-77 Pearlescent Plexiglass Button
33 SG 125-77 plastic buttons
34 B 1256-77 6020 polyester film
35 SG 187-80 PTFE film
36 SG 188-80 PTFE rod
37 SG 189-80 PTFE pipe
38 SG 190-80 PTFE plate
39 SG2 12-80 Rigid PVC Foam Board
40 SG2 13-80 polypropylene woven bag
4 1 SG2 14-80 PVC gasket for concrete sleeper
42 LY2 18-80 plastic veneer
43 SG224-8 1 high pressure polyethylene heavy packaging bag (film)
44 SG232-8 1 polystyrene foam plastic board
45 SG233-8 1 polystyrene foam packaging material
46 SG234-8 1 plastic belt
47 SG243-8 1 Black Low Density Polyethylene Cable Sheath Material
48 SG244-8 1 PVC foam sandals
49 SG245-8 1 Flexible PVC Extruded Sheet
50 SG246-8 1 polypropylene pipe
5 1 SG252-82 flexible polyurethane foam
52 SG259-82 polyethylene blow molding barrel
Pvc sintered microporous separator for 53 SG260-82 battery
54 SG274-82 Centrifugal Plastic Fan
55 SG275-82 centrifugal plastic pump
56 SG28 1-83 polypropylene binding rope
57 SG3 1 1-83 Soft PVC Printing Film
58 SG8 1-84 Soft PVC Blow Film
59 SG354-84 polypropylene blown film
60 SG369-84 polyethylene (LDPE) blow-molded agricultural plastic film.
6 1 SG384-84 PVC sandwich foam assembled sandals
62 SG387-84 Acrylonitrile-Butadiene-Styrene (ABS) Plastic Extruded Sheet
63 GB6674-86 low density polyethylene pipe for sprinkler irrigation
64 GB6980-86 calcium-plastic corrugated box
65 GB7 134-86 Casting-type industrial plexiglass plate, bar and pipe.
66 GB7 135-86 Casting Pearlescent PMMA
Technical requirements of plastic boxes for storage, transportation and packaging of fresh eggs
68 GB8674-88 Storage and management of plastic packaging for transportation, storage and packaging of fresh eggs
69 GB88 14-88 Rigid PVC Door and Window Frame Profile
70 GB88 15-88 Soft PVC plastic for wire and cable
7 1 GB8868-88 vegetable plastic turnover box
72 GB8945-88 PVC wallpaper
73 GB8946-88 plastic woven bag
74 GB8947-88 composite plastic woven bag
75 GB8948-88 PVC artificial leather
76 GB8949-88 polyurethane artificial leather
77 GB968 1-88 Hygienic standard for PVC molded products for food packaging
Hygienic standard for 78 GB9683-88 composite food packaging bags
Hygienic standard for the use of additives in food containers and packaging materials
80 GB9686-88 Hygienic standard for polyamide epoxy resin coating on the inner wall of food containers (instead of GBn45-84)
8 1 GB9687-88 Hygienic standard for polyethylene molded products for food packaging (instead of GBn84-80)
82 GB9688-88 Hygienic standard for polypropylene products for food packaging (instead of GBn85-80)
83 GB9689-88 Hygienic standard for polystyrene molded products for food packaging (instead of GBn86-80)
84 GB9690-88 Hygienic standard for melamine molded products for food packaging (instead of GBn87-80)
85 GB969 1-88 Hygienic standard for polyethylene resin for food packaging (instead of GBn88-80)
86 GB9692-88 Hygienic standard for polystyrene resin for food packaging (instead of GBn89-80)
87 GB9693-88 Hygienic Standard for Polypropylene Resin for Food Packaging (instead of GBn 146-8 1)
88 GB 10002 1-88 rigid PVC water supply pipe
89 GB 10002 2-88 rigid PVC water supply pipe fittings
90 GB 10003-88 Universal Biaxially Stretched Polypropylene
9 1 GB 10004-88 Polyester (PET) aluminum foil (Al) polypropylene (CPP) composite film and bag
92 GB 1005-88 biaxially stretched polypropylene composite low density polyethylene (BOPP/LDPE) film and packaging bag
93 GB 10008-88 polyethylene foam ceiling
94 GB 10009-88 acrylonitrile-butadiene-styrene (ABS) plastic extruded sheet
95 GB 100 10-88 medical PVC hose
96 GB 1044 1-89 flexible plastic folding packaging container
97 GB 10454-89 flexible container bag
98 GB 10457-89 polyethylene self-adhesive cling film
99 GB 10506-89 injection shoes
100 GB 10798-89 general wall thickness table for thermoplastic pipes.
101GB10800-89 rigid polyurethane foam for building insulation.
102 GB10801-89 polystyrene foam thermal insulation material
103 GB 10802-89 flexible polyurethane foam
104 GB 10803-89 composite plastic woven cloth
105 GB 10804-89 rigid PVC interior door
106 GB 10805-89 rigid PVC film for food packaging
107 GB 10806-89 plastic mesh bag
108 GB117931-89 classification of physical properties of PVC plastic windows.
109 GB11793 2-89 technical conditions for mechanical properties and weatherability of PVC plastic windows.
110 GB119821-89 PVC coiled material floor
111GB12003-89 basic dimensional tolerance of plastic windows.
112gb12023-89 plastic strap
113gb12025-89 HDPE blown film
114gb12026-89 heat seal biaxially oriented polypropylene.
115gb12802-91biaxially stretched polypropylene for capacitors.
116gb135271/t-92 PVC hose for fluid transportation
117gb13527 2/t-92 Flexible PVC bushing for wire insulation
118gb13508-92 polyethylene blow molding barrel
Limit deviation of external diameter and wall thickness of119gb13018-91polypropylene (PP) pipe.
120 GB13019-91polyethylene (PE) pipe-limit deviation of external length and wall thickness.
121GB13020-91Limit deviation of outer diameter and wall thickness of rigid PVC pipe
Uniaxial stretching of122qb1128-91HDPE film.
123 zgb33001-85 PTFE pipe
124 ZGB33002-85 PTFE sheet
125 ZGB33003-85 PTFE rod
126 ZGB33004-85 PTFE film
127 ZGY28006-88 rigid PVC U skirting board
128 ZBY28007-88 low foaming PVC mirror wire
129 ZBY28009-89 unsaturated polyester resin buttons
130 ZBG33005-89 PTFE tape for thread sealing
13 1 ZBG33006-89 polypropylene extruded sheet
132 ZBG33007-89 polyethylene extruded sheet
133 ZBG33008-89 PVC plastic corrugated conduit
134 ZBG33009-89 PVC heat shrinkable film and sleeve
135qb1127-91soft PVC printed film
136qb1125-91unstretched polyethylene and polypropylene film
137qb1126-91polyolefin filler masterbatch
138qb1124-91PVC plastic sole
139qb1123-91paper-plastic nonwoven composite packaging bag
140qb1230-91PVC nylon cloth-based artificial leather.
141QB1231-91polyethylene blown film for liquid packaging.
142 GB 13520/T-92 rigid PVC extruded sheet