Stainless steel coil, English (Stainless steel coil), generally 12.5px to 20mm in diameter, thickness of 2.5px to 2.0mm coil or mosquito mounted bends; widely used in the chemical industry, machinery, electronics, electric power, textile, rubber, food, medical equipment, aviation, aerospace, communications, petroleum and other industrial fields. Stainless steel industrial tubes, ultra-long coiled tubes, U-shaped tubes, pressure tubes, heat exchanger tubes, fluid tubes, spiral coiled tubes product features: high-temperature steam, impact corrosion resistance, ammonia corrosion resistance; anti-scaling, not easy to stain, oxidation corrosion resistance; long service life, reduce maintenance time, save money; loading good processability, can be directly replaced, safe and reliable; pipe wall uniformity, the wall thickness is only 50-70% of the copper tube, the overall Thermal conductivity is better than copper tube; it is the ideal heat exchanger product for old unit renovation and manufacturing new equipment.
In the petrochemical, electric power, nuclear industry, medicine, food and other industries can be widely used. Stainless steel coil for industry: heat exchanger, boiler, petroleum, chemical, fertilizer, chemical fiber, pharmaceutical, nuclear power, etc.. Stainless steel coiler for fluid: beverage, beer, milk, water supply system, pharmaceutical equipment, etc. Stainless steel coils for mechanical structure: printing and dyeing, printing, textile machinery, medical equipment, kitchen equipment, automobile and ship fittings, construction and decoration. Stainless steel bright coil: welded by the stainless steel belt and then reduce the wall, reduce the wall from thick to thin, this process can make the wall thickness uniform, smooth, and reduce the wall stretching the pipe wall to form the effect of no weld. According to the naked eye is a seamless pipe, but its process is determined by the welded pipe. The process of wall reduction accompanied by bright annealing, so that the inner and outer walls will not form an oxide layer, inside and outside the bright, beautiful, which is really needed for medical products. The next process needs to be sized, that is, the big pull small process, to determine the outer diameter, the outer diameter tolerance can generally reach plus or minus 0.01mm.