Reinstallation tutorial
Posted by Ru￠wind on 2005-5-31 16:58:28
First of all, make sure that your CD-ROM drive is in the first boot order and supports booting from the CD-ROM drive.
To install from CD-ROM, set up your BIOS so that the system can boot from the CD-ROM. The method is as follows:
(1) Start the computer, and when the screen displays the Press Del to Enter BIOS Setup prompt message, press the Del key on the keyboard to enter the motherboard BIOS setup interface.
(2) Select the Advanced BIOS Features option and press Enter to enter the setup program. Select the First Boot Device option, and then press the Page Up or Page Down key on the keyboard to set the item to CD-ROM, so that you can change the system to CD-ROM boot.
(3) Return to the main menu to save the BIOS settings. (To save, press F10, then Y.)
(4) Then put the CD-ROM into the CD-ROM drive and reboot the computer, the system will boot from the CD-ROM and display the Installation Wizard interface, and you can follow the prompts to set up the installation step-by-step and you'll be fine.
Before you restart your computer for the first time after copying files to your hard drive, you must remove the CD-ROM from the CD-ROM drive; otherwise, the system will still boot from the CD-ROM and will cycle through the installation process.
Method 2:
Then, press any key to enter CD-ROM boot mode and load the Mini version of the operating system.
Then, press Enter to confirm to continue the installation.
Then, press F8 to accept the license agreement.
Then, select the location where you want to install, choose a large enough space and press Enter.
Then, select the file system, NTFS is recommended, and press Enter.
Then, a disk scan will be entered and the installer will be copied to the hard disk.
The computer will then restart after 15 seconds, press Enter to restart immediately.
The installation process then continues by booting from the hard disk, which begins in graphical interface mode.
After a series of hardware tests, you will be prompted to select a region, where you can configure the language, keyboard, and region.
You will then be prompted for a username and organization name, and a computer name will be generated that you can change.
Then, you will be prompted to enter the product registration code.
Then, you will be prompted to enter the administrator password.
Then, a component selection box will be displayed to select the Windows components you wish to install.
Then, the time zone and time settings will be entered.
Then, go to Networking Component Installation (if your computer has a network card and is properly recognized during hardware detection).
After the network is configured, the computer will detect and install a series of Windows components and services.
Then, reboot and run the newly installed Windows.
Then, move to the final stage of the installation, which monitors for plug-and-play hardware that was not detected earlier.
Finally, it's ready to go!
Method 3:
Installing the system (the following is an example of installing WINDOWS XP)
I chose the full Windows XP installation CD without any cracks. Start the computer, when the word "CD-ROM startup press any key", enter, start copying the installation program, check the capacity and format of the system disk location, these can be ignored; appear on the system hard disk file format selection is best AT32, do not choose NTFS. although the NTFS file system on the xx system stability and speed, as well as hard disk management functions. Stability and speed as well as hard disk management functions have been greatly improved, but NTFS only supports NT as the kernel of Windows NT, Windows2000, WindowsXP, does not support DOS, WindowsME, Windows98. so, for us who often play software is not suitable. Once there is a system crash, there is a possibility that you have to reinstall the system by means of repartitioning, formatting, etc. under NTFS, and as soon as you repartition, the information and data on the hard disk will be completely finished. (This is a lesson I learned from countless losses, when using Windows 2000, I used the NTFS system, mainly used to prevent the CIH virus on the system and hardware super-damage, can now prevent and kill CIH is too easy) On the contrary, in the FAT32 file system, as long as there is a 98 or Me startup disk formatted with the C disk can be reinstalled, and not afraid of losing all the data and data on the hard disk, so you can reinstall your system. lose all the data and information on the hard disk. (Regarding partitioning, I won't talk about it here, I will have a chance to talk about partitioning specifically later, including the real-world xx practice of FDISK and DM, partitioning is a more dangerous and troublesome thing)
Next, copy the system files, prepare for installation and other steps. A dialog box appears to select the time zone, language, etc., so I don't need to tell you about that. Wait patiently.
If the original installation of XP under DOS, you must first copy the smartdrv.exe file (in the installation directory of Win98, named smartdrv.exe) into the 98 boot floppy diskette, run it before the installation can be greatly improve the speed of installation. (I sometimes run it before installing, sometimes I forget, but I don't feel much difference, or maybe my computer has more memory?
If you are reinstalling XP with the original system intact and with xx on the system hard drive, the Upgrade/New Installation dialog box will appear during the installation process, and you will have to choose Upgrade unless you want to install a dual xx system on your machine.
When asked for the serial number, enter the following number:
BX6HT-MDJKW-H2J4X-BX67W-TVVFG
This registration code is basically able to install (I've tried at least 5 or 6 XP installation CD-ROMs), and generally the installation time is not more than 60 minutes.
After the installation is complete, choose not to activate now to activate later, press next, fill in at least one name, such as JixXP, and enter all the way through, and you're done.
Now to activate the system: I used the Russian hacker's activation method. See the following instructions:
Method: Copy SETUPREG.HIV to the %systemroot%system32 directory
Overwrite the original file (I couldn't find this SETUPREG.HIV, I pasted it directly),
Reboot,
Press F8 to enter the Safe Mode, log on as administrator,
Press F8 to enter the Safe Mode. Log in as administrator,
Run WINXP_CRK.EXE, reboot, enter WinXP, select "Phone Activation" when asked to activate, and fill in "401111" in each box. ---- activation is successful!
Western Electronics /, remember to download the authorization KEY also download, can be used for free for a month, I think it is the best of all the free download of antivirus software. Most importantly, this is the first way to make sure your system doesn't get infected with a virus again after reinstalling it.
Step 7: Use kaspersky to scan for viruses, use the highest level, scan for about 20 minutes or so, and if you confirm that it's free of viruses, then congratulations, your favorite machine is back to life.
The eighth step, immediately go to play SP2 patch, pay attention to go to Microsoft's website under, do not from other places under.
Step 9: Download the trial version of Skynet Firewall.
The tenth step, quickly go to find a genuine antivirus software can be used permanently, KASPERSKY itself is really good, very reputable, but the price is too expensive, actually want 450 yuan, temporary emergency can, you do not care about the money also does not matter, I have a machine infected with poison, with Rising Star and the river is the latest version of the latest version of the genuine people, did not check the poison, with Kaspersky on the check! I'm not sure if I can find the virus with Kaspersky. The most important thing to remember is that you should be able to use the latest version of Rising Star, which is the most up-to-date version of Rising Star, as well as Kaspersky.
Note. In the above 10 steps, basically eliminate any piracy (I can't speak for your operating system), so the new system should be pure. Please do not browse any other websites or download or install any other programs locally until you have completed the above 10 steps.
Finally, I believe that 99.9% of the viruses that are tossed around like this are 100% dead on your machine. All of them are legal.
The calculator can be "through the calculation" of the four versions of Windows series: Windows XP Professional, Windows XP Professional.VLK that is, Shanghai Government Edition, Windows Server 2003 VLK, Office XP. VLK (Shanghai Government Edition), Windows Server 2003 VLK, and Office XP. (Note: It is best to fill in the Random Seed column with other random numbers as the random seed when counting numbers.
(You can go to the Microsoft website to test the legality of the method: my computer --- help menu --- select "this Windows legal" or through the test site: /resourc ... indows/default.mspx Click Validate Now button, and then according to the prompts to download ActiveX controls can appear Thank You!)
NO.2, XP check number changer Keyfinder1.41
The software is used to view and change the CDKEY, mainly for the purpose of changing some of the activation server has been flagged by Microsoft "illegal" installation of the serial number
NO.3, online activation programs 1.0
At present, the activation method of SP2 must be activated online, this program is an effective online activation method developed in the SP1 era, although in the SP2 era, there will be an error message when activating, but it is still the only effective method to ensure that the activation server can pass the Microsoft activation detection successfully.
Preparing these three tools is the only way to activate Xp SP2.
The second step is to install WindowsXP Professional and SP2:
NO.1, install WindowsXP Professional, and note that the installation serial number must be calculated using a 4-in-1 calculator, which can be calculated before installation and noted down in case of an accident, and it is best to randomly fill in the Random Seed and then click the The first step is to create a new version of the program, which you can use to create a new version of the program.
(The reason why we don't recommend the serial numbers provided in the vast number of pirated CD-ROMs and downloadable installation packages is that many people are using them, and because the market for users with the same serial number is so large, it is easy for Microsoft to ban them!
(The reason why randomly fill in the Random Seed and then click Generate to generate, is to prevent with the majority of lazy D version of the hands of users are using 0 to do seed generation and lead to the use of the same serial number, so the conflict
No. 2, the installation of the official Simplified Chinese version of the SP2 official note that the installation of the SP2 does not have to activate WindowsXP.
The third step, the activation of the SP2 official Simplified Chinese version of the installation of the SP2 does not have to activate WindowsXP. p>The third step, activate the SP2 version of WindowsXP Professional:
**Suggested Tip: It is best to do a Ghost clone backup at this point in the unactivated.
**Run the Online Activation Program 1.0 (critical step!!!)
(1) Use your mouse to click on the small window
(2) Wait
(3) After the activation window appears, please select "Activate via Internet"
(4) You can choose not to register (registration is also possible, name, password, Email authentication code..., it's very troublesome
(5) If you want to activate the program, you can use the "Activation" function to activate the program, but it's not necessary for you to do so.
(5) Fill in the serial number used in the previous step of the installation
(6) Click Retry
(7) An error message appears (this step must be ignored, it is normal)
(8) Restart your computer
(9) Do not run the Activate windows in the start menu
(10) Run online activation 1.0 again
(11) At this time there are two kinds of situation: A. Prompt windows has been activated! (You can skip to step 21 directly
B. No successful prompt, still repeat the previous interface, then please do not worry, you are just one round
(11) still choose "Activate via Internet"
(12) do not register
(13) pay attention to here! Instead of "Fill in the serial number from the installation" and "Retry", click "Phone"
(14) Select "Change the ID"
(15) Use the 4in1 calculator to calculate a new serial number
(16) Fill in the newly calculated serial number
(17) Tap "Update" (18) There is an error message, but still don't pay attention to it
(19) Reboot the computer
(20) Tap "Update" to update the serial number
(21) Tap "Update" to update the serial number
(22) Tap "Update" to update the serial number
(23) Tap "Update" to change the ID. ) Restart your computer
(20) Run Online Activation 1.0 again
(21) You should be able to activate it successfully by the second step!
So far, WindowsXP Professional SP2 has been successfully activated. (If still unsuccessful, please always repeat the above 8 ~ 20 steps, until the loss of patience until
***Suggested Tips: Finally, at this point in the activation, the XP partition where the important personal data and files backed up under the premise of changing the date of the system (at least pushed back by 31 days, the future of a month, the next month Well, can not be used for a month of activation what counts? Then reboot and see if you can log in smoothly without activation prompts. If you can log in normally, your XP SP2 is indeed fully activated
.