One, network equipment: including switches, routers, firewalls, servers, minicomputers, disk integrators, etc.;
On the second hand, communications equipment: switch room, transmission room, base station equipment, data equipment, etc.;
Three, power equipment: refers to the primary equipment, secondary equipment. Including power plants, substations, transmission lines, power grids, general business distribution rooms. The main cleaning objects are generators, motors, insulators, distribution cabinets, surge arresters, CT, PT, switches, circuit breakers, transformers, high and low voltage distribution cabinets, etc.;
four, precision instruments: automation control equipment, electronic medical equipment, imaging equipment, etc..
Introduction of charged cleaning Precision electronic equipment in the long-term continuous operation process, due to the atmosphere floating in a variety of dust and dirt, metal salts, oil and other integrated pollutants, through the physical adsorption, particles of gravity settling effect of precipitation on the surface of the precision electronic equipment and communications equipment equipment room environmental conditions of the limitations of the operation of the equipment air supply system, the machine room remodeling and renovation, etc., it will be common to make the long-term Communication equipment under continuous operation is seriously contaminated. So that the heat dissipation ability of precision electronic equipment is reduced, affecting its operational quality and operational reliability. These dust, oil, moisture, salt, oxidation, corrosive gases, etc. caused by the formation of equipment within the circuit "comprehensive pollution", resulting in additional equipment, "microcircuit" effect and "slow corrosion" effect; communications equipment in the normal operation of the electromagnetic field distribution, air supply system for a long time friction accumulation, etc. caused by the "cumulative static electricity", *** with the formation of communications equipment to produce a "soft failure" of the two major sources of different degrees of contact with precision electronic equipment, causing the "soft failure" of the communication equipment, the "soft failure" of the two major sources. Different degrees of precision electronic equipment caused by poor contact, impedance reduction, leakage, short-circuit, obstacle rate, error codes, bad boards, etc., resulting in line energy loss, transmission signal weakening, transmission rate and quality of the unstable rate of soft failures such as the increase in the rate of the heavily polluted equipment will also make the heat dissipation ability to decline, affecting the rate of access to the call and the quality of communications.
Technical characteristics of charged cleaning 1, high insulation (5.5 × 107 Ohm), does not affect the work of electrical appliances to meet the requirements of charged cleaning, high-voltage (22KV), non-conductive, no short-circuit, does not reduce the characteristics of components. Electrified operation, there is no risk of fire and explosion; for some electrical machinery and equipment can not be blackout, without disassembly can be cleaned;
2, can be in the normal operation of the equipment, without scrubbing, fast and thorough removal of a variety of precision electronic instruments and equipment on the static electricity, oil, dust, fiber material, salt, metal dust and other harmful substances, and equipment has a special protective effect, can Effectively improve the safety and reliability of precision electronic instruments and equipment to ensure that precision electronic instruments and equipment in the best technical condition.
3, cleaning electrical machinery and equipment failure caused by oil, dirt, water vapor, dust, salt, ice and snow, without damaging the material and electrical characteristics of electrical equipment; some electrical machinery and equipment can not be blackout, can quickly and effectively eliminate the short circuit, heat, dirt flash, fog flash caused by the failure, including the hand can not touch the parts of the cleaning can be done. Can efficiently and safely completely remove the dirt on electrical machinery and equipment caused by the comprehensive pollution, to ensure that electrical machinery and equipment for normal continuous operation, and extend its service life.
4, on the printed circuit board of various metals, various electronic components, silicone resin, polyester, nylon, rubber, phenolic, insulating paint and a variety of finishes are not damaged; switching circuits have a special protective effect. There is no flammability hazard of gasoline and organic solvents; there is no damage to paint finishes, insulation coverings, composite materials and oil-resistant rubber and plastics.
......
The above information is from Baidu! For your reference ！！！！