1. The purpose of safety production inspection is to discover unsafe behaviors of people and unsafe states of things during construction through inspection, so as to take countermeasures to eliminate unsafe factors and ensure safety production; Second, the use of safety inspection to further publicize, implement and implement the party and the state's safety production principles and policies, various rules and regulations, norms and standards; Third, through inspection, strengthen the safety awareness of leaders and the masses, correct illegal operations, and improve the consciousness and responsibility of doing a good job in safety production; Fourth, through investigation, we can learn from each other, learn from each other's strengths, exchange experiences and learn lessons; Fifth, through inspection, we can deeply understand the trends of safety production and provide information and basis for analyzing the situation of safety production, studying countermeasures and strengthening management. Second, the main content of safety inspection is to check the idea, system, mechanical equipment, safety facilities, safety education and training, operation behavior, use of labor insurance articles, civilized construction, construction electricity, scaffolding, gantry (tic-tac-toe) foundation pit support, formwork engineering, casualty accident treatment, etc. Three. Methods and requirements of safety inspection 1. The safety supervision engineer in the general manager's office shall inspect the construction site at least four times a week, and conduct safety production and civilized construction inspection and scoring once a month, so as to master the situation of safety production and civilized construction in the project department, and organize the implementation of "three determinations" for the hidden dangers of safety accidents found in the inspection, that is, personnel, time and rectification measures, and make rectification within a time limit, and make inspection and scoring records. 2. The safety officer of the project department, safety supervision engineer, and supervisor of the General Office shall conduct all-weather and whole-process inspection on the construction site every day, discover and eliminate all kinds of unsafe factors in time, take temporary measures for difficult problems that cannot be corrected and solved, report them in time, eliminate hidden dangers of accidents, ensure safe production and civilized construction, and make inspection records. 3, the construction site should often carry out self-inspection, mutual inspection and handover inspection. Self-inspection: before and after the shift operation, it is necessary to carry out safety inspection on its own environment and working procedures to eliminate hidden dangers of accidents at any time. Mutual inspection: the safety inspection between teams and groups can supervise and restrain each other. Handover inspection: After the last procedure is completed, before handing it over to the next procedure, the person in charge of the site shall organize foreman, safety officer, team leader and other relevant personnel to carry out safety inspection or acceptance, and then hand it over to the next procedure after it is confirmed to be correct or qualified. Such as scaffolding, gantry (tic-tac-toe), cranes, etc. , must pass the handover inspection before installation and use. 4, all kinds of safety inspection should be equipped with power according to the inspection requirements. Especially for large-scale and comprehensive inspections, it is necessary to clarify the person in charge of the inspection, deploy professionals to participate, and divide the work, and clarify the contents, standards and requirements of the individual responsible for the inspection. 5, each kind of safety inspection should have a clear inspection purpose and inspection items. Focus on the key points and key parts of the establishment of the "guarantee project". On-site managers and operators should not only check whether there is illegal command and illegal operation, but also conduct spot checks on the knowledge they should know to understand the safety quality of managers and operators. 6, inspection records are the basis of safety evaluation, therefore, be careful. In particular, the records of hidden dangers of accidents must be specific, such as the location of hidden dangers, the degree of danger, and treatment opinions. If a safety inspection score sheet is used, the reason for each deduction shall be recorded. 7. Safety inspection needs careful and comprehensive system analysis, and safety evaluation should be qualitative and quantitative. 8, rectification is an important part of the safety inspection work, is the ultimate goal of inspection. The rectification work includes hidden danger registration, rectification within a time limit, review and cancellation. Four. Accident hidden trouble treatment 1. The hidden dangers of accidents found in the inspection should be registered item by item, which is not only the basis for inspection and rectification, but also an important information channel for providing safety dynamic analysis. This situation can be studied to guide the decision-making of safety management; 2. The notice of rectification of hidden dangers found in safety inspection has attracted the attention of the rectification unit. For the hidden dangers limited to accidents, the inspectors should be ordered to stop work, and the inspected units must immediately rectify; 3, for illegal command, illegal operation behavior, inspectors must be pointed out on the spot, immediately correct; 4. The leaders of the inspected unit should immediately study the hidden dangers rectification plan and deal with it according to the requirements of "three decisions" (fixed personnel, fixed time limit and fixed measures). Reliable protective measures must be taken before hidden dangers are eliminated; 5. After the rectification is completed, the relevant departments shall be notified in time, and personnel shall be sent for re-inspection. Only after the re-inspection is qualified can the sales be carried out. 5. All supervisors shall supervise and inspect the construction electricity, gantry (tic-tac-toe), protection of construction machinery and scaffolding, cranes, pile drivers, formwork engineering and other projects of the project department. Before construction, the technical director of the project department shall make safety technical disclosure. After the installation is completed, the project manager shall organize the technical director, full-time safety officer and relevant operation team leader to conduct inspection and acceptance before use. After acceptance, report to the director's office for inspection and acceptance. After acceptance, fill in the Application Form for Acceptance of Safety Protection Articles and Mechanical Equipment on the Construction Site and report it to the safety supervision station where the project is located for inspection and acceptance. After the inspection and acceptance, the Notice of Safety Acceptance of Mechanical Equipment on the Construction Site and the Certificate of Safety Protective Equipment and Mechanical Equipment shall be issued and hung in a conspicuous position of mechanical equipment. Safety protection appliances and construction machinery and equipment that have not been accepted by the safety supervision station and issued a notice of acceptance and a certificate of safety application shall not be used, and the materials submitted for inspection shall be properly filed. Six, check the project department full-time security personnel, patrol inspection according to the production arrangement system of the project department, and inspect the construction site of this unit. Inform the project manager to rectify the hidden dangers found out, and report to the company's security department and the director's office. Seven, check the project manager, in addition to the daily inspection, check the safety status of the construction site at any time, and conduct a comprehensive safety inspection on the construction site every Saturday. Immediately rectify the hidden dangers found and take them as the content of Monday's education. Eight, check the production team leader, team part-time security officer, check the construction site, workplace, tools and equipment before class, patrol inspection in the production process, and correct the problems immediately when found. Nine, check the project department to do a good job of seasonal safety inspection before the rain period and winter period. The safety production inspection led by the project manager and attended by safety and electromechanical personnel focuses on the safety status of scaffolding, gantry, electrical equipment and construction electricity in the rain period; In winter, it is important to check mechanical equipment, construction electricity, fire protection, prevention of gas and additive poisoning, anti-skid and anti-freezing measures.
For more information about project/service/procurement bidding, and to improve the winning rate, please click on the bottom of official website Customer Service for free consultation:/#/? source=bdzd