The key type time control switch is also divided into two kinds: with batteries (shell with battery compartment) and without batteries.
The keypad time switch with battery compartment: after the debugging is messed up, you only need to remove the battery and wait for a moment, then it can be restored to the factory settings.
Housing without battery compartment key type time control switch: After the debugging is messed up, you just need to calibrate the current time of the switch correctly, and delete the timer set before.
1. Unlock the screen by pressing the "Cancel/Resume" key. Press the "Calibrate Hour" button to calibrate the hour, the "Calibrate Minute" button to calibrate the minute, and the "Calibrate Week" button to calibrate the week.
2. Click the Timer button to see how many sets of timer there are, and click Cancel/Resume button one by one.
Bluetooth timer switch (with power failure memory function): It is almost the same as the button type timer switch without battery, it can calibrate the time and delete the previous timer, but the specific operation is different.
1. Carry out the small program control layout, click on the proofreading time (one key proofreading time, do not need to proofread the week, hour, minute respectively).
2. Long press the timer to set the timer time, the "warning" pops up whether to delete the timer, click OK, click save to send it.
Open or lock the keyboard: press and hold the "clock key" while holding down the "cancel/restore key" for a few seconds to lock the display symbol "lock". 2, press and hold the "clock key" while holding down the "cancel/restore key" for a few seconds to lock the display symbol "lock". 2. Press and hold the "Clock key" and then press the "Day key, Hour key, Minute key" to adjust the Beijing time.3 Setting the switching time: Steps , Press the key, set the item 1) Press (Manual) to make the display triangle in the auto position 2) Press (Set) to enter the timer to open the timer (Display 1 On) 3) Press (Set) to enter the timer to open the timer (Display 1 On) 4) Press (Set) to enter the timer to open the timer. (Display 1 On) 3) Press (Week), set the same every day, different every day, same Monday to Friday, or same Saturday to Sunday 4) Press (Hour) (Minute), set the time to turn on 5) Press (Set), go to the Timer Off setting (Display 1 Off) 6) Press (Hour) (Minute), set the time to turn off 7) Repeat 2) to 6), set the time for the 2nd to 6th and 2nd to 12th switching 8) Press (Clock), end time setting*. (Clock) to end time setting *If 6, 12 switches are not needed press (Clock) to return to actual time. *If the setting is wrong or canceled press (Cancel) and press again to restore the original setting. *Displays (----) when there is no setting.