The Seitron thermostat 5060e3 fault is that the temperature is outside the upper limit of the measurement range. Turn off the machine immediately.
Jintron thermostat 5060 is designed with NTC thermal sensor or thermocouple into the corresponding circuit, NTC thermal sensor or thermocouple changes with the temperature change, it will produce the corresponding voltage and current change, and then through the microcontroller on the change of voltage and current detection, quantification and display, and do the corresponding control.
Expanded Information:
1. Use the thermostat in the following cases, nuclear energy control, medical equipment, automobiles, trains, airplanes, aviation, recreational or safety devices, etc., and need to be installed with safety protection devices.
2. Do not touch the terminals while the thermostat is energized, or electric shock may occur.
3, do not disassemble and alter the thermostat, otherwise it may cause electric shock or fire.
4.Please check the terminal number when connecting the power cord or signal input, otherwise it may cause the thermostat to be burnt or fire.
5.The thermostat can not be used outdoors, otherwise it will shorten the service life of this thermostat or electric shock will occur.
6, in flammable and explosive, humidity, heat radiation, severe vibration and other places should be avoided to use the thermostat, otherwise it may cause the thermostat can not work properly.
7, in the thermostat can not have flowing dust or sediment, or may cause electrical failure or fire.
8, different graduation number of thermocouple thermocouple compensation wire is different, the thermostat using internal automatic compensation mode, the compensation wire should be directly connected to the thermostat back cover terminals, the middle can not be converted to ordinary wire, otherwise it will produce measurement error.