1. Assistant Engineer title assessment conditions
1, after graduation from secondary schoolcopy education, as a technician for four years or not recognized technician to participate in the work of six years, you must participate in the examination, the examination is qualified to become qualified for an assistant title;
2, after graduation from college education, three years of work experience, qualified, recognized assistant title qualifications
3, after graduation of bachelor's degree, one year of apprenticeship, qualified in the assessment, recognized as assistant title qualification;
4, after obtaining a master's degree, and then engaged in the work of the profession for three years, qualified in the assessment, can be the first intermediate title qualification;
5, doctoral degree holders, qualified in the assessment, can be the first intermediate title qualification.
2. Assistant Engineer conditions
The conditions are:
Assistant Engineer, the name of the title, refers to the relevant provisions of the state, through the relevant examination, and the relevant state departments to assess the qualifications to obtain the corresponding post.
1, after graduation from secondary school, as a technician for four years or not recognized technician to participate in the work of six years, you must participate in the examination, the examination is qualified to become assistant title qualification;
2, after graduation from college, two years of work experience, qualified, recognized assistant title qualification;
3, after graduation from bachelor's degree, after a one-year traineeship period, qualified
4, after obtaining a master's degree, and then engaged in the work of the specialty for two years, qualified in the assessment, the qualification of the initial intermediate title;
5, doctoral degree recipients, qualified in the assessment, the qualification of the initial intermediate title.
(2) apply for assistant engineer conditions extended reading
Note
1, college and university graduates should be engaged in professional and technical work after graduation and the same (or similar) to the specialty of the initial title;
2, the implementation of the National Qualification Examination of the profession (such as economics, accounting, statistics, Audit, etc.), must be recognized by the State Education Commission of the regular full-time college graduates of this profession in order to determine the initial title;
3, do not meet the conditions of the initial title of the professional and technical personnel, according to the provisions of the ** Personnel Department of the unified organization of professional knowledge training, and after passing the examination to obtain a certificate of completion of the title declaration procedures in accordance with the approval process;
4, in the medical and health institutions, the health care personnel should participate in the national qualification examinations, should be the same (or similar to) with their specialty;
4, in medical and health institutions. The health care personnel, should participate in the national examination to obtain professional and technical qualifications, not directly for the initial title;
5, I wrote a summary of the work shall be true, comprehensively reflect the situation of my professional and technical work, the number of words is not less than 800 words.
6, full-time vocational college graduates applying for assistant engineer before, need to fill out the professional and technical title assessment form and assessment of resume, assessment of qualified before participating in the professional and technical title assessment.
3. assistant engineer how to apply for what basic conditions
assistant engineer application method
1, first file to declare assistant engineer in the city, and for the agent. Otherwise, you can only apply for the file in the location of the person, and now many talent centers can also help with the process.
2, fill out the professional and technical position qualification confirmation statement. Forms of professional and technical positions to fill in your current job content, to show that you are now doing the job content, such as process design, mechanical design and so on at a glance to make people understand is the work of engineering. Forms written below the personal summary, the end of the personal commitment, must be handwritten. Company manpower in the next column to sign and stamp.
3, ready to graduate and degree certificate original, copies, copies to be stamped with the company's official seal.
4, fill out the summary table, the summary table "now engaged in professional" to confirm the professional and technical qualifications with the professional and technical to fill out the submission form. Stamped with the company's official seal, submitted electronically and in paper form each.
5, assessment and evaluation form. The company's assessment of my evaluation report, generally speaking, you need to write your own good to find the company stamp.
6, social security payment certificate. Print the company to pay your social security certificate, also to be stamped with the company seal. Also prepare three photos, two 1-inch sticker in the submission of the statement, a 2-inch submit it.
7, after all these are ready, first go to the place where my file for review, they will be in the submission of a stamp, and then take these materials according to the requirements of the submission.
The basic conditions required for assistant engineers
1, after graduation from secondary school, as a technician for four years or not recognized technician to participate in the work of six years, you must participate in the examination, the examination is qualified to become a qualification of assistant title;
2, after graduation from college, three years of work experience, the examination is qualified to recognize the qualification of assistant title;
3, After graduation of bachelor's degree, one year of apprenticeship, qualified in assessment, recognized as assistant title qualification.
4. Assistant engineer title assessment need to have what conditions
At present, there are two ways to get the title: examination and evaluation (without taking the test).
I. Normal reporting conditions
1. Assistant title:
(1) bachelor's degree, engaged in professional and technical work for more than one year.
(2) college graduate, engaged in professional and technical work for more than two years.
(3) Secondary school graduates, engaged in professional and technical work for more than three years.
(4) High school graduates, engaged in professional and technical work for more than seven years.
(5) junior middle school education, engaged in professional and technical work for more than ten years, at the same time, should have the post.
2. Intermediate title:
(1) bachelor's degree, engaged in professional and technical work for more than five years, more than four years as an assistant.
(2) College graduate, engaged in professional and technical work for more than six years, more than four years as an assistant.
(3) Secondary school (high school) graduates, engaged in professional and technical work for more than ten years, as an assistant position for more than four years.
(4) junior high school education below the personnel must be engaged in professional and technical work for more than fifteen years, more than four years as an assistant position.
3. Senior title:
(1) bachelor's degree, engaged in professional work for more than ten years, more than five years as an intermediate position.
(2) University graduates, engaged in professional and technical work for more than fifteen years, and more than five years as an intermediate position.
(3) secondary school, high school graduates, engaged in professional and technical work for more than twenty years, and hold intermediate positions for more than five years.
All of the above reporting conditions, but also must comply with the law, have a good work ethic, can conscientiously fulfill the duties of the post, in the professional position to make significant achievements, and has the corresponding professional theory and practical work ability.
Second, the list of declaration materials
1. "Professional and Technical Position Evaluation Form" (middle and junior in duplicate), the annex table (one); the main table in the main work performance column should be filled out in detail, specific.
2. The previous year's "professional and technical personnel assessment registration form".
3. Professional papers and summaries of business work.
Professional paper requirements:
(1) must be personally written, not plagiarized.
(2) should be combined with my work and the actual position.
(3) The word count is not less than
3000
words.
Business work summary requirements:
(1) To write their work experience clearly.
(2) To write clearly the main projects responsible for or involved in.
(3) To write clearly the papers published or what major achievements and awards have been made.
(4) The number of words should not be less than
1500
words.
4. Submit the original certificate of graduation, junior title certificate.
5. Certificate of Proficiency Test for Professional and Technical Personnel;
6. Other relevant materials that can reflect my working ability and important performance.
7. 6 one-inch color photos, ID card, two copies of the academic certificate.
Anyone who does not have all the relevant materials according to the above requirements will not be accepted.
Third, the relevant professional categories
Architectural engineering: civil engineering
civil engineering
civil engineering
garden engineering
construction management
construction
building construction
building decorations
building design
municipal surveying
security engineering
safety engineering
the construction of a new building, the construction of a new building, the construction of a new building and the construction of a new building, the building of a new building.
Construction Budgeting
Water Supply and Drainage
Architectural Art Design
Corrosion and Protection
Plumbing and Protection
Plumbing and Heating Thermal Energy
Plumbing and Electrical Installation
Railway and Bridge
Valuation Engineering and other majors
Economics: Accounting
Economics
Mechanical electromechanical: mechanical electromechanical
Boiler
Equipment installation
Water and electricity
Electricity
electronics and other specialties
5. What are the conditions and process of declaring the junior title (Assistant Engineer)
Hebei Junior title conditions
6. assistant engineer title assessment conditions
Yes, the future can be in accordance with the undergraduate to go to the declaration of the assessment of the title
Satisfaction please adopt, thank you
7. please apply for assistant engineers in Guangzhou, what are the conditions
Because the official website of the Guangzhou Personnel Bureau is now undergoing maintenance, and can not give you the exact
The link is now given to you. > Assistant engineers are not all audited and assessed, depending on the diploma of graduation, undergraduate graduation is recognized, graduate school graduates are not recognized as assistant engineers; on the issue of assistant engineers should be combined with their own situation: if it is because the unit does not have the opportunity to, then also ask your account in the unit to put it? If it is in the talent exchange center, then the talent exchange center can give you assessment; if in your unit (less likely), then through the Personnel Bureau can be done, of course, you must have the requirements of the Personnel Bureau, such as articles, computer exams, English exams and so on.
A: Junior assistant title evaluation conditions
Assistant title evaluation declaration conditions
1, secondary school graduates, one year of apprenticeship period, the assessment is qualified, can be initially determined by the qualifications of the staff; staff qualifications for four years, the initial qualification of the assistant title (such as secondary school graduates after working for five years can be directly determined by the initial qualification of the assistant title);
2, College graduates, after one year of apprenticeship, and then engaged in the technical work of the specialty for two years, qualified, can be initially assistant title qualification;
3, bachelor's degree graduates, after one year of apprenticeship, qualified, can be initially assistant title qualification;
4, master's degree, and then engaged in the work of the specialty for three years, qualified, can be initially intermediate title qualification;
5、Doctoral degree recipients, qualified in the assessment, can be initially qualified for intermediate titles.
Special note: the implementation of the national qualification examination of the profession (such as economics, accounting, statistics, auditing, etc.), must be recognized by the national education administrative department (currently the Ministry of Education) of the full-time ordinary college graduates of this profession to the initial qualification.
A: in that unit on the seal of that unit can be A: If the unit is qualified, it is very convenient. If the file in the talent market will have to fill out a few forms , to the unit's certificate, the original graduation certificate.
A: Assistant Engineer to be assessed in a timely manner
Otherwise, it may affect the assessment of your intermediate title A: the prerequisites for the evaluation of the title: must be in the talent market for personnel agency that is the file dependency. On the other hand, it is the time issue of title evaluation that meets the conditions for evaluation. On the question of where to assess, there are units on behalf of the organization. It is directly from the unit personnel department to take your information to the talent market to deal with. There are by myself to go for the ---- personal commissioned personnel agency of this part of the comrades. I am applying for personal commissioned personnel agency. The place of processing is the personnel bureau of the talent market.