How to fix automatic washing machine faucet connector leak? How to install?

The emergence of washing machines greatly facilitates people's daily life, saves time, frees people's hands, and is no longer afraid of freezing hands in the cold winter. Fully automatic washing machine completes the whole process of laundry, for the office workers who live a very busy life, it is a time-saving tool. Automatic washing machine faucet connector will sometimes appear leakage phenomenon, then it will be a very troublesome thing, so automatic washing machine faucet connector leakage should do it? Automatic washing machine faucet and how to install it? The following is a detailed introduction to you.

Automatic washing machine leakage solution

1, automatic washing machine faucet leakage solution - faucet leakage has a variety of reasons, once the leakage phenomenon is found, you should first check which part of the problem, replace that! Accessories can be.

2. Automatic washing machine faucet leakage solution is common to tie the faucet part (fixing screws) of the water stop tape damage caused. In this case, as long as the use of plate pliers will be removed from the faucet, in the place of the fixed screws to re-roll on the new water stop tape can be.

3. Automatic washing machine faucet leakage solution if the faucet will be tethered tightly, or leakage may be the cause of the spout leakage, generally due to wear and tear of the axial spacer inside the faucet. In this case, you can use pliers to turn loose and remove the gland lock, use the clamp to take out the shaft gasket, and replace it with a new shaft gasket.

4. Automatic washing machine catch faucet leakage solution inlet pipe is not tightened. Most of this situation occurs in, when installing the water inlet pipe, did not tighten the joints, resulting in water leakage when using the washing machine, or after a long time with the washing machine, the phenomenon of loose joints, the use of maintenance tools, tighten the joints, then the solution to the phenomenon of water leakage of the washing machine water inlet pipe.

5. Automatic washing machine connecting faucet leakage solution inlet pipe is bad. As a result of long-term water erosion, the joints of the water inlet pipe will be corroded, resulting in water leakage. The only solution is to replace the inlet pipe.

6. Automatic washing machine faucet leakage solution may be the pressure cover within the triangle gasket wear caused by the lower part of the faucet leaking leaking. In this case, you can turn the screws loose to remove the head of the chain, and then loosen the gland to remove, and then the inner triangle of the gland gasket out, and replace it with a new one.

7. Automatic washing machine faucet leakage solution cover type nut loose may also lead to take over the joint leakage, you can re-tighten the cover type nut or replace with a new U-type gasket.

Full-automatic washing machine faucet installation

Full-automatic washing machine has a high-pressure water pipe, one end of the washing machine inlet tightening, and one end of the set in the flat faucet, there is a white plastic screws back to loosen the top 4 screws in the tightening of the white plastic screws in the clockwise tightening of the set of interfaces to test the water whether the leakage, there is a leak in the adjustment of water in the interface. Leakage, there is leakage in the adjustment of its plane and check the faucet out of the flat mouth whether there is a gap, intact in accordance with the above practice to re-test the installation, the white plastic screws back off in the tightening of the four screws in the tightening of the plastic screws.

Automatic washing machines facilitate people's lives, but there will be some problems, such as washing machine faucet connector leakage, which is a trouble, must be a lot of people headache this problem. First of all, we must first find the problem, see whether it is damaged parts, if so, just need to be replaced. If it is a corroded joint, just replace the inlet pipe. In the several cases mentioned above you can do the right thing. People who have tools at home can install the automatic washing machine faucet connector on their own, so they don't need to hire a professional, and also master one more skill.