How does C4D make an arc surface? How to make a cube into an arc surface?

CINEMA4D is a professional 3D software developed by MAXON Company in Germany. C4D has obvious advantages in rendering speed and expansibility. There are many people studying C4D now. F4, switch to the front view; Move the cube below the arc, select the cube, and press the c key to turn the cube into an editable object; Press the number to box the tool, and in point mode, select all four points above the cube; Then, point the X-axis arrow and push the cube to the arc. Select the face mode, box the tool, select the face above the cube, hold down the CTRL key, click the Y-axis arrow, lift it up and pull out a cube; Click the Z-axis arrow again to push the cube onto the arc. Press the CTRL key again, click the Y-axis arrow, lift it up and pull out a cube; Click the Z-axis arrow again to push the cube onto the arc. Do the same as above, then press CTRL, click the Y-axis arrow, lift it up and pull out a cube; Don't pull it too long, then click the Z-axis arrow to push the cube onto the arc; Stick to the arc. And so on, the same operation as above, and then continuous operation, the cube reaches the arc end. F1 Switch to perspective view, flip the lower angle, and look at the effect (Figure 2 in this step). We can see that some places are not very smooth; Switch to the front view again. In point mode, use the marquee tool to select these points, and then push them down to make them fit the arc. Well, that's all for sharing with you today. Thanks for reading "How to make a curved surface in C4D? How to make a cube into an arc surface? " . If there are students who want to learn C4D software, then really don't miss the C4D video course! Click on the link: