How to use a manual pump

1, first of all, do a sealing check of the compression bag, make sure there is no air leakage phenomenon.

2, the zipper will be zipped up with the slide, in the pull to one-third of the parts of the stop, squeeze the bag with your hand, most of the air inside the pressure out, and then the remaining parts of the zipper to pull on.

3, then open the compression bag on the air mouth cover, and the manual pump interface butt up. Then start pulling the piston back and forth, wait until the compression bag is flat down, the air inside is pumped out, and then cover the air nozzle cover on the line.

This manual pump is only suitable for small compression bags, for larger compression bags, if you use it to pump the air, it will be very tired, accidentally there will be a phenomenon of running gas. Therefore, for larger compression bags, it is recommended to choose to use an automatic pump, which will save time and effort.

Compression bag vacuum pump notes

1, before using the vacuum pump, you need to check the compression bag, to see whether the zipper part of the tiny fibers or dust, if not dealt with, then it affects its sealing. We can use wet gauze to wipe it clean, and then seal it after drying. At the same time, for the just cleaned bedding, need to dry naturally for a day and then loaded into the compression bag, which can effectively evaporate the residual solvents on the top, so as not to breed mold.

2, if the compression bag of the button zipper part of the protruding objects, it is necessary to fold it to the outside, but not with the surface of the compression bag, to avoid the bag to damage. In addition, the compression bag if dirty, need to clean up in time, so as not to affect the storage items.