How to detect ozone in the air?

K-EP60 Atmospheric Environment Monitoring Station is a miniature air quality online monitoring system, which integrates various environmental detection sensors to realize real-time monitoring of meteorological parameters (temperature, humidity, air pressure, wind speed and direction) and air eight factors (PM2.5, PM 10, CO, nitrogen oxides, SO2, O3, VOC and customizable gases). The monitoring station uses solar cells for power supply and lithium batteries for energy storage to ensure all-weather data acquisition. The field data collected by the atmospheric environment monitoring station are transmitted to the monitoring platform through wireless 3G/4G or wired network. Multiple monitoring stations are distributed in a certain area to form an effective monitoring network, and the data is presented to the management through the monitoring platform, which is convenient for the management to make environmental protection decisions.

Model K-EP60

The detection contents include CO, CO2, SO2, NO2, O3, PM2.5, PM 10, etc. Monitoring gas can also be customized.

The system consists of gas pollutants (SO2, NO2, CO, O3, VOC) monitoring, particulate matter (PM2.5, PM 10), meteorological (wind speed, wind direction, temperature, humidity, air pressure) monitoring unit, wireless data communication unit and LED large-screen display.

Power supply mode: mains power supply of 220V or solar power supply.

Communication methods include 4G, RS485 and Bluetooth.

The battery life can work continuously for more than 24 hours without external power supply.

Network communication function HJ2 12 communication protocol, remote upgrade, remote automatic calibration, continuous offline data transmission.

Insulation strength ≥ 20m Ω

Enclosure protection grade IP54

Size1020x540x120mm

Power supply AC220V/50Hz

Working environment temperature -25~55℃

Relative humidity < 85%

Full-screen numerical display is made of LED outdoor P 10 cell board, the module size is 320* 160mm, the point distance is 10mm, the point diameter is 10mm, and the module color is red.

The box is made of iron-white electrostatic spraying, with a thickness of 12 cm and a front face of 3 cm.

The resolution of the display screen is 96×48 (4 lines and 8 columns of Chinese characters can be displayed).

Page turning frequency 1 The screen is displayed every 5 seconds.

Installation method: 1. Wall-mounted installation method is adopted.

2. The appearance mode is below the display screen, and the rainproof joint is directly led out from the inside of the display screen.