1. The factory should be in the workshop, office, dormitory and canteen posted Chinese version of the SEDEX Code of Conduct;
2. The factory should be set up in the complaint box and suggestion box, for employees to complain or put forward their views;
3. At least once a month, the temperature and humidity of the production plant and warehouse inspection records;
<4. Workshops should be set up ventilation facilities to maintain air circulation in the work area;
5. Noisy areas, the production unit should be issued with earplugs for employees, and posted on the wall warning signs to remind employees of the hazards of noise and wear protective equipment;
6. Factories should be distinguished between hazardous and non-hazardous waste, and post the appropriate sign on the corresponding garbage cans;
7. p>
7. Offices, production workshops, dormitories (each floor) and canteens should be equipped with first-aid kits, on which a list of medicines and a record of their receipt are posted; first-aid kit logos, first-aid procedures and first-aid telephone numbers must be affixed to the kits;
8. The factory should provide free and hygienic drinking water. And post the logo of drinking water;
9. Workshop machinery and equipment must be posted operating instructions, and requires regular maintenance and repair records;
10. Chemical warehouse each chemical should be posted MSDS logo, and to set up eye washers, dangerous chemicals should be posted hazardous chemicals logo;
11. Warehouses are not allowed to use ordinary fluorescent lamps, must use explosion-proof lamps, warehouse goods must be posted on the logo and first aid phone;
11. Explosion-proof lamps must be used, the height of the warehouse goods shall not exceed the relevant provisions;
12. Electrical wires should be with protection, preferably in PE pipe, placed in the mouse bite through;
13. Electrical equipment on the plug board do not exceed its corresponding load, must be installed current leakage circuit breaker, the load will be automatically cut off in the event of excessive;
14. Sockets should not be installed in the heat source The socket should not be installed near the heat source, fire source or faucet, and the plug board installed outdoors should have a waterproof device;
15. The fan used on the site must have a protective cover to prevent personnel from touching the injury caused by accidents;
16. Workshops, offices, canteens and dormitories should be equipped with fire alarms on each floor, fire alarms and the sound of the alarms on and off duty should be differentiated from each other, and the switch of fire alarms for dormitories and production workshops should be equipped with one each, and for the noise of the noise, the switch should be installed on each floor, and the switch should be installed on each floor. Production workshop is equipped with a switch dormitory and production workshop, for the more noisy production areas, should be equipped with sound and light alarm;
17. Each safety exit, stairway and access should be equipped with fire emergency lights, safety exit signs should be electrically powered light-emitting;
18. Number of fire extinguishers are required: the warehouse is equipped with 1 per 100 square meters, the workshop is 1 per 80 square meters, a point cannot be Less than 2, can not be more than 5, the fire extinguisher location should be fixed;
19. The top of the fire extinguisher from the ground height of not more than 1.6 meters, the bottom of the height from the ground of not more than 0.8 meters, the distance from any point of the workshop to the nearest fire extinguisher shall not be greater than 25 meters;
20. The pointer of the extinguishers should be pointing to the green area, every month routine inspection; check once a year to ask the Relevant third-party qualification institutions to check once, fire extinguishers are posted on the fire extinguisher instructions;
21. Smoke alarms installed every 70 square meters, each check once, required to be able to function properly;
22. Safety exits must be a safety exit signs and fire emergency lights, required to be a 24-hour always on;
23. Work area access and office Work area access and office area should be posted on the escape landmarks;
24. All doors in the factory is required to be outside the door, not inside the door, roller shutter door or mobile door;
25. The width of the two lines of the safety channel 7cm each, the distance between the two lines is about 1.2 ~ 1.5 meters (the location of the larger workshop can be wider). Channel with reference to the evacuation diagram drawn with an arrow on the exit indication line. The channel must be kept free, if easily blocked, please post "Do not occupy the channel" sign;
26. Fire plan, each production workshop and office area should be posted one, each safety exit must be posted one, which should be marked with the current location, the location of the safety exit, escape route instructions and emergency evacuation points.
Weber Enterprise Management Consultants Limited (VBON) is a domestic professional engaged in factory inspection and counseling of the well-known factory inspection and counseling organizations, successful cases Wal-Mart, Disney, Target, Costco, Sears, Apple, Tesco, Coca-Cola, Jcpenney, Nike, Home Depot, McDonald's, Lowe's, Kohl's, Oppo, Watson's and other customers factory inspection and BSCI, SEDEX, ICTI, WRAP, WCA, EICC, RESA, SQP, SA8000, C-TPAT and other system certifications, ten years of experience in counseling, auditing relationships throughout the country, more than 2,000 successful cases, to ensure that One-time through all kinds of factory inspection audit!
Weber Enterprise Management Consulting Co!