Plastic medical wastebasket standards
1, plastic medical wastebasket as a whole is made of hard materials, relatively sealed to ensure that the plastic medical wastebasket in the normal use of the case, the box contained sharp instruments do not leak, plastic medical wastebasket once sealed, it can not be easily opened without destroying the case;
2, plastic medical wastebasket can be puncture-proof. The syringe needles, broken glass and other sharp instruments can not pierce the plastic medical waste cans;
3, full of plastic medical waste cans from a height of 1.5m vertical drop to the concrete floor, 3 times in a row, plastic medical waste cans will not appear rupture, puncture and so on;
4, plastic medical waste cans are easy to incinerate, do not use polyvinyl chloride (PVC) Plastic as a raw material for manufacturing;
5, plastic medical waste cans for the overall color of yellow, in the box on the side of the words "injurious waste" or "medical waste";
6, plastic medical waste cans should be printed on the medical waste warning system identified in Article 5 of the regulations;
6, the plastic medical waste cans should be printed on the medical waste warning system identified in Article 5 of the regulations. Article 5 of the provisions of the medical waste warning signs (see figure);
7, plastic medical waste cans specifications can be based on the actual needs of users to determine the size.
240L yellow medical trash can
Plastic trash can appearance and mechanical properties:
1, plastic medical trash can raw material requirements:
Plastic trash can box should be selected as raw material for the high-density polyethylene (HDPE) using the injection process; box cover selection of high-density polyethylene and polypropylene (PP) **** mixing or special materials using the injection process. Injection process.
2, plastic medical wastebasket appearance requirements:
(1) plastic wastebasket body box cover sealing groove, the overall assembly closed. Box and lid can be firmly fastened, fastening not separated;
(2) smooth and flat surface, no cracks, do not allow obvious depression, edge and end of the hand without burrs. The sprue does not affect the case flat. Do not allow ≥ 2mm impurities exist;
(3) plastic trash can box bottom and top with matching teeth groove, with anti-slip function.
Small yellow pop-up lid medical wastebaskets
3, plastic medical wastebaskets physical and mechanical properties:
(1) plastic wastebaskets box bottom load-bearing: deformation of the underbend is not more than 10mm.
(2) Shrinkage and deformation rate: the diagonal rate of change of the plastic wastebaskets box is not more than 1.0%.
(3) drop strength: at room temperature with a weight of 20kg specimen from 1.5m height vertical drop to the cement floor, three consecutive times, cracks are not allowed to occur.
(4) stacking strength: empty box mouth upward flat, loading plate and weight of the total mass of 250kg, bearing pressure 72h, box height change rate is not greater than 2.0%.
(5) hanging strength: at room temperature fishing hook hook box end hand parts, fishing rope angle of 60O ± 30O for, box uniform weight 60kg, smooth lifting off the ground for 10 minutes after putting down, the specimen is not allowed to produce cracks.
Medical waste bin, is to contain health care institutions in the medical, preventive, health care and other related activities with direct or indirect infectious, toxic and other hazardous waste containers. Medical waste*** is divided into five categories and is included in the National Hazardous Waste List.
Waste Classification
Medical waste refers to wastes with direct or indirect infectious, toxic, and other hazardous properties generated by medical institutions in the course of medical, preventive, healthcare, and other related activities, specifically including infectious, pathological, injurious, pharmaceutical, and chemical wastes. These wastes contain a large number of bacterial viruses, and have certain characteristics of spatial contamination, acute viral infection and latent infection; if they are not better managed and discarded at will, and are allowed to be mixed with domestic garbage and dispersed into people's living environments, they will contaminate the atmosphere, water sources, land and plants and animals, and cause the spread of diseases. Seriously jeopardize the physical and mental health of people. In today's environmental protection awareness is gradually increasing, to protect the environment is the responsibility and obligation of each of our citizens. Nowadays, there are a variety of technologies that can be used to dispose of medical waste, among which high-temperature incineration can fully ensure the stabilization, safety, reduction and harmlessness of medical waste, and at the same time, meet the contemporary development trend of medical waste disposal. In addition, the sanitation department carried out the management and treatment of medical waste in the mid-1990s, set up specialized institutions and dedicated staff to medical institutions to collect and centrally dispose of medical waste at regular intervals, and gradually improved the management system of the pollution control process of medical waste, so that it can be carried out strictly in accordance with the relevant national standards and technical regulations throughout the whole process of handling medical waste.
English name: Medicalwaste
The Classification Catalog of Medical Waste divides medical waste into five categories:
1. Infectious waste refers to medical waste carrying pathogenic microorganisms with the risk of causing the spread of infectious diseases, including articles contaminated by patients' blood, body fluids and excreta, and garbage produced by patients suffering from infectious diseases;
2. p>2. Pathological waste refers to the diagnosis and treatment process of human waste and medical test animal carcasses, including surgery produced by the discarded human tissues, pathological sections of discarded human tissue, pathological wax blocks, etc.;
3. Injurious waste refers to the ability to stab or cut the human body of the discarded medical sharps, including medical needles, scalpels, scalpels, glass test tubes, etc.;
4. Pharmaceutical waste refers to expired, out of date, deteriorated or contaminated waste medicines, including discarded general drugs, discarded cytotoxic drugs and genotoxic drugs, etc.;
5. Chemical waste refers to toxicity, corrosive, flammable and explosive waste chemicals, such as discarded chemical reagents, chemical disinfectants, mercury sphygmomanometers, mercury thermometer, etc. The laboratory discarded general chemical reagents, chemical reagents, mercury thermometers, etc., can stab or cut the human body. General chemical reagents discarded in the laboratory and discarded disinfectants, etc. are discharged into the sewers. Classification and bag collection, special recycling treatment, disposal methods: can be incinerated using incineration, medical waste of pathogens such as culture media, specimens and strains of high-risk waste should be autoclaved or chemically disinfected, and then collected and treated as infectious waste.
Medical waste crates
Domestic waste (except those discarded by infectious patients) can be treated as ordinary domestic waste.