Silicone tube can be divided into "extruded tube", "shaped tube". According to the category, can be divided into medical silicone tube, life silicone tube, industrial silicone tube and so on. The following is introduced according to the structure of the silicone tube to classification. 1. silicone tube according to its skeleton layer material and structure, can be divided into full rubber silicone tube (no fabric material), clamped silicone tube (skeleton layer for the cloth layer), attracting silicone tube (cloth layer and a layer of metal helix), braided silicone tube (skeleton layer of braided steel wire or fabric), twisted hose (skeleton layer of steel wire or cord winding layer), knitted hose (skeleton layer of knitted fabric), short-fiber hose (skeleton layer), knitted hose (skeleton layer), knitted hose (skeleton layer), knitted hose (skeleton layer), knitted hose (skeleton layer), knitted hose (knitted fabric), short fiber, knitted hose (skeleton layer). Knitted hose (skeleton layer of knitted fabric), short-fiber hose (short fibers and rubber **** mixed pressure and become). 2. Used to transport gases, liquids, slurry or granular materials in a class of tubular rubber products. By the inner and outer rubber layer and the skeleton layer, the skeleton layer of materials available cotton fiber, various synthetic fibers, carbon fiber or asbestos, steel wire and so on. General rubber hose inside and outside the rubber layer material using natural rubber, styrene-butadiene rubber or parabutadiene rubber; oil-resistant silicone hose using chloroprene rubber, nitrile rubber; acid and alkali, high temperature silicone hose using ethylene-propylene rubber, fluoroelastomer or silicone rubber, etc. 3. Silicone hose molding method according to the use of the core with or without the core can be divided into core method (which also includes the soft-core method and the hard-core method), the coreless method. Core method refers to the hose in the hard core or soft core molding, coreless method is the skeleton layer and the outer rubber layer directly in the press out of the inner hose molding of the above three is in accordance with the structure of the silicone tube is classified, can be widely used in aviation, electronics, petroleum, chemical industry, machinery, electrical appliances, medical, oven, food and other related fields.