As early as before the launch of iPhone 12, some magnetic charging accessories can be seen sporadically on the market, but these products are generally not so-called designed for a certain type of cell phone. It is the launch of iPhone 12, a great impetus to the development of the magnetic wireless charging market, related third-party magnetic charging accessories are closely around the "MagSafe magnetic" design, well-known brand MOMAX MOMAX has launched a Q.MAG Power magnetic wireless charging mobile power.
Recently, Momax launched a Q.MAG POWER+ 10000mAh magnetic wireless charging mobile power IP100MFI for iPhone 12, the first to use a transparent tempered glass shell design in the product design, which can be clearly seen in the product internal circuitry, can be said to be very hardcore.
In addition, the product is equipped with a 1A1C1L triple interface, support for 12W/18W input and 20W fast charging output, as well as 10W magnetic wireless charging, for iPhone 12 users, out of the house only need to bring a Lightning cable to meet the power needs of the day out. In addition, the mobile power also passed the WPC qi and Apple official MFi dual certification. The following ChargeManager.com is a detailed disassembly of this product, to see how the specific materials used in the work.
First, the appearance of Momax magnetic wireless charging mobile power
The front of the box is printed with the MOMAX brand, the MFi certification logo, the qi certification logo, the appearance of the mobile power and the iPhone 12 picture, the name and so on.
The back of the box is printed with a picture of the product usage scenario and description.
The bottom is labeled with a merchant information sticker and a certificate of conformity.
The book-style design of the box, open the "cover" can be seen through the window of the mobile power in kind, show good results.
The package contains the mobile power, data cable, instruction manual and so on.
The cable is an A to C cable with a frosted plastic case for easy insertion and removal, and the MOMAX brand logo is printed in the recess.
The MOMAX Q.MAG POWER + Magnetic wireless charging power supply has a flat body with a transparent tempered glass panel on the front and an aluminum alloy bezel on the side, which makes it a very hardcore design that's also very refined and beautiful.
The front of the mobile power body is covered with tempered glass, and the internal structure is clearly visible.
The center of the front is the wireless coil, Leeds line winding, peripheral **** there are 16 strong magnets around, magnetic suction is very strong, the number of strong magnets do not reduce the matching, better experience, the bottom 2 magnets for fixed. The center of the coil is the wireless charging logo, the glass panel is very intuitive.
The top of the coil is the charging treasure PCB circuit board, the internal chip components are clearly visible, very cool.
The back of the body adopts a woven texture leather back cover, which is a good experience in the hand.
There is a power button on one side of the body, and QC3.0, PD3.0, and 10W wireless charging logos are printed on it.
The other side of the body is equipped with an LED indicator, and printed with the mobile power parameters
Model: IP100MFI
Li-ion battery capacity: 10,000mAh (37Wh)
Rated capacity: 6000mAh
USB-C input: 5V3A, 9V2A
Lightning Input: 5V2.4A
USB-C Output: 5V2.4A, 9V2.22A, 121.5A
USB-A Output: 5V2.4A, 9V2A, 121.5A
Wireless Output: 5V1A, 9V1A
Three simultaneous outputs: 5V3A
The power supply is powered by Mimi. p>
Designed by Momiji, Made in China
By Momiji Technology Co.
Indicators are divided into status indicator and power indicator, the power indicator lights up white, and the wireless charging status indicator lights up red.
Under wired fast charging status, the status indicator lights up green.
The top of the body is equipped with Lightning input port, USB-C two-way fast charging port and USB-A port.
Close-up of the Lightning input port, which is officially MFi certified by Apple.
The USB-C is reinforced internally to ensure that it won't loosen even after multiple plugs and unplugs over a long period of time, with attention to detail.
Close-up of the USB-A port with green tongue.
The measured length of the mobile power body is 143.63mm.
The width is 71.17mm.
Thickness is 16.05mm.
Comparing it with the iPhone 12 Pro Max, the whole is also a circle smaller.
Visualization in the hand.
The net weight is about 259g.
Measured with ChargerLAB POWER-Z KT002, the USB-A port supports Apple 2.4A, Samsung 5V2A, DCP protocols, as well as QC2.0/3.0, AFC, FCP, SCP, and PE2.0 fast charging protocols.
In addition, using KT002, we measured that the USB-C port additionally supports the PD3.0 fast charging protocol compared to the A port.
Additionally, port C has three fixed voltage levels of 5V2A, 9V2.2A, and 121.5A, as measured.
Using Apple's original charger to charge the mobile power via the Lightning port, the measured charging power is 5V 2A 10W.
Charging the mobile power via the USB-C port, the measured charging power is 8.8V 2.1A 18W.
Reversing this, using the mobile power's USB-C port to charge the iPhone 12 Pro. The measured charging power is 9V 2A 18W.
Momentum's magnetic wireless charging mobile power disassembly
Tear off the back of the body leather cover, the edge of the shell with multiple screws encapsulated fixed, very solid.
Remove the screws to open the case.
There is a plastic frame embedded in the grooves of the enclosure, a protruding fixed support plate for the USB-C female connector, and an isolation slot for the LEDs to prevent crosstalk.
The battery and PCB are fixed on the back plastic plate.
The battery is also wrapped in a layer of black insulating paper, on which the wireless charging coil is placed.
Close-up of the wireless charging coil, wound with Leeds wire.
Peripheral strong magnet fixed in the groove, a **** 16 pcs.
Close-up of 2 magnets at the bottom for cell phone positioning.
The thickness of the magnet ring plus the metal sheet is 2.13mm.
The diameter is 54mm.
The total weight is about 9g.
The battery cell is from NV Novelty New Energy, with the specification of 10,000mAh/3.85V/38.5Wh.
Close-up of the thermistor, used for the temperature monitoring of the battery cell.
The PCB board is fixed with screws, and on the front there are devices such as the main control chip of the mobile power, inductors, and wireless charging control chip.
The back of the board has a lithium protection chip, microcontroller, etc. The board is immersed in gold processing, with a strong contrast of black and gold color scheme.
Suzhou XYsemi XB8886M integrated Li-ion protection chip for high-voltage platform Li-ion battery protection, built-in 8.5mΩ protection tube for mobile power battery overcharge and overcurrent protection.
The main control chip of the mobile power adopts Zhirong SW6206, which is a highly integrated multi-protocol bi-directional fast-charging mobile power dedicated all-in-one chip, supporting A+A+B+C+L port fast charging. It integrates 5A high-efficiency switching charging and 22.5W high-efficiency synchronous boost output.
SW6206 supports multiple fast charging protocols such as PPS, USB PD, QC, AFC, FCP, SCP, PE, SFCP, etc., power metering, LED light, digital tube display, and corresponding control management logic. Only a few peripheral devices are needed to form a complete high-performance bi-directional fast charging mobile power solution.
Charging head network learned that the use of Zhirong SW6206 main control chip products and Momiji 10000mAh wireless charging mobile power, iWALK 10000mAh racing treasure mobile power, the magic fox 10000mAh colorful screen wireless fast-charging mobile power, McDonald's 10,000mAh magnetism wireless charging mobile power, the NetEase ZhiZhou 10000mAh wireless charging mobile power, Pinnacle 20000mAh wireless charging mobile power, the Pinnacle 20000mAh colorful screen wireless fast-charging mobile power. charging mobile power, Pinsent Masons 20000mAh 22.5W all-agreement fast-charging mobile power, Romance 10000mAh 22.5W super fast-charging mobile power and so on.
2R2 lift voltage inductance close-up, large size with low temperature rise, bottom coated with rubber reinforcement.
Four 8205A MOS tubes for overcurrent protection for three interface inputs and outputs.
One chip next to the Lightning input, silkscreen 610A38 for MFi certification.
LED light driver microcontroller, information not available.
Unlabeled microcontroller for wireless charging transmitter control.
Silkscreen 6EH08 wireless charging all-in-one transmitter chip with built-in driver stage and full-bridge power MOS tubes.
Close-up of the four NPO resonant capacitors.
The power button is soldered on the chip.
Close-up of the LED indicators, two status indicators **** enjoy a position.
Close-up of the Lighthning input female chassis, reinforced with a steel jacket.
Close-up of USB-C female connector, over-hole soldering.
USB-A female chassis with countersunk plate overbore soldering.
All disassembled, take a family photo.
Charging head net disassembly summary
Momiji this Q.MAG POWER + magnetic wireless charging mobile power capacity of 10,000mAh, not too small suitable for daily carry emergency charging, coupled with its own novel appearance design and high value, it is easy to become the focus of the small partners. The transparent body plate is made of tempered glass, and the side is aluminum alloy frame, very strong protection is not easy to fall.
The product is equipped with 1A1C1L three interfaces, support Apple 2.4A, QC, AFC, FCP, SCP, PE2.0, PD3.0 and many other protocols, support 20W wired fast charging, compatibility is very good. It also supports up to 10W magnetic wireless charging, supports qi certification, and meets the charging needs of iPhone 12 phones, AirPods headphones, and smart wearable devices. The mobile power is also equipped with a fast charging indicator, whether it is in the fast charging state at a glance.
ChargeHead.com found through disassembly that this product is fixed with a screw package, and disassembly is relatively easy. The use of screws is more, the fixed balance is solid. The main control chip of the mobile power supply adopts Zhirong high-integrated multi-protocol two-way fast-charging mobile power dedicated all-in-one chip SW6206, with strong performance and reliable quality. The battery cell is equipped with Sage Micro XB8886M integrated battery protection chip and thermistor for protection.
In addition, we can see that the back of the body is equipped with a plastic support frame, the battery pack is wrapped in insulation paper, the interface bus bar is welded, the Lightning bus bar is also jacketed with a metal shell to reinforce it, and the PCB board is immersed in gold, and the welding of components is clean and sharp, with a high level of workmanship and reliable overall product quality.