Jiangyin I'm not sure, but now do wheel plating is basically concentrated in the area of Jiangsu, Zhejiang and Shanghai, you can look at your local car repair places can do not, or you directly inside Baidu to look for
Wheel refurbishment restoration of the plating process
Step 1: Detection
The detection of the wheel whether there is a distortion of the deformation, up and down bouncing, left and right swinging
The second step: plastic filling gap
The use of aluminum alloy welding technology to fill the gap, a complete solution to the general wheel refurbishment of the shortcomings of the atomic ash filler is not solid (if there is no gap without deformation without the need for this step)
The third step: paint treatment
Take off corrosion of the aging paint, unlike the general wheel wheel refurbishment directly hand sanding or do not remove paint, resulting in later easy to appear! Or do not take off the paint lead to the later easy to appear the shortcomings of the wheel off the skin is not solid
The fourth step: polishing
1) the original wheel surface is relatively rough, ② wheel screw holes and valve holes are uneven, ③ wheel chassis, the use of polishing and sanding technology to achieve the wheel surface flat and wheel details of the wheel is perfect, a complete solution to the general wheel refurbishment surface uneven and wheel details such as the screw holes skinning and other shortcomings. The wheel chassis is a perfect solution to the general wheel refurbishment surface unevenness and wheel details such as screw holes peeling shortcomings.
The fifth step: cleaning infiltration
Five procedures to clean the wheel, wheel refurbishment from the root to ensure that the repair of the wheel flawless standard
The sixth step: spray mustard paint
Wheel spray powder and high temperature melting, the bottom of the use of powder spraying technology, to solve the wheel refurbishment manufacturers generally use the bottom of the wheel hardness caused by the poor adhesion of the wheel hardness and poor shortcomings
The seventh step: spraying mustard paint
Wheel spraying and high temperature melting, bottom of the use of powder spraying technology, solves the wheel refurbishment manufacturers use paint bottom caused by poor hardness and poor adhesion shortcomings
Seventh step: plating
Wheel into the dust-free plating line, plating, baking (plating involves technology alone, not convenient to put the picture introduction)
Eighth step: spray finish
Wheel spray finish, and then into the baking out of the hardness of the wheel can reach more than 2H to achieve the surface of the wheel without defects of the standard
Ninth step Salt spray test
Salt spray test after the wheel plating, test the quality of the wheel's salt spray corrosion resistance, so that the corrosion resistance of the wheel is greatly improved
Shanghai Zhiqi Wheel Repair Plating provides you with the answer, please adopt the satisfaction