If this is not please refer to try
18 kinds of monitors to enter the factory mode )
A method to enter the "Factory Mode"
⒈ Founder's monitor
(1) Founder's 15-inch and 17-inch Shuttle monitor: hold down the Shuttle key and then turn on the monitor to enter the "Factory Mode" method
(1) Founder's 15-inch and 17-inch Shuttle monitor: hold down the Shuttle key and then turn on the monitor to enter the factory mode. Shuttle key before powering on to enter the factory mode.
(2) Founder OSD monitor: press and hold the center button before powering on and then power on to enter factory mode.
Founder 15-inch CNC monitor: press and hold the "RESE" key and then turn on the power until the adjustment indicator blinks, which means that it has entered the factory mode.
(4) Founder FG796?NS monitor: After the monitor is turned off, press and hold down the "UP" key and "DOWN" key at the same time, and then press the power switch to turn on the power until the indicator flashes, that is, to enter the factory mode. Note: Some models of Founder monitor in the "Factory Mode" can also view the monitor's working time. This function can help users easily check the actual use of the monitor time, to prevent the business of the sample machine after the second box and then sold as a new machine.
Peake EMC monitor
1) EMC D777 monitor: the machine to enter the factory mode method is very special, after turning off the power of the monitor, first remove the power plug, hold down the menu selection does not let go, and then plug in the power plug, press the power switch to boot, and wait for the screen to appear "OSD" menu, that is, has entered the factory adjustment mode. When the "OSD" menu appears on the screen, it has entered the factory adjustment mode.
(2) EMC797 monitor: the machine into the factory mode method is also very special. After turning off the monitor power, remove the power plug, press the topmost adjustment key on the control panel without letting go, then plug in the power plug, press the power switch to turn on the monitor, then the monitor enters the factory mode.
(3) EMC D17-inch flat panel display: After powering off, press and hold the "U" key and "Exit" key at the same time, and then press the power switch to turn on the monitor, then the factory mode adjustment option will appear in the upper left corner of the screen.
(4) EMC570 monitor: after the shutdown, press and hold the Shuttle key, and then press and hold the power switch on, then, if you directly press the Shuttle key, the screen shows the user menu; and rotate the Shuttle key to enter the factory mode state of the English menu. After the end of debugging, and then press the on/off key once, then exit the factory mode.
Xiahua display
(1) Xiahua 1769 display: after the power off, press the power switch to boot, do not let go, and then press the shuttle key, also keep holding down the state, and finally release the power switch, the screen appears "FACTORY OSD" factory mode.
(2) XIAHUA 15 Ⅲ monitor: press and hold the degaussing key, then press the shuttle key, and then release the degaussing key until "FACTORY OSD" appears on the screen, then it enters the factory mode.
Sung TCL monitor
1) TCL M506 monitor: Press and hold down the "SELECT" key and "+" key at the same time to turn on the monitor, it will enter the factory setting state. Press the "SELECT" key to change the adjustment options, press the "+" or "-" key to adjust the data, when adjusted to the upper and lower limits, the corresponding indicator bar flashes.
(2) TCL M505 monitor: first press and hold any key to make the "OSD" menu appear, adjust the "+" key or "-" key to select the upper right corner of the "Zoom". "ZOOM" icon in the upper right corner, press the "8" key twice in a row, note that the second time to hold down for about 4 to 5 seconds, then the screen appears factory mode adjustment options.
(3) TCL7XX series monitors: press the "MENU" key to call out the "OSD" menu, press the right button to move the cursor to the "ZOOM" position, and then press the "MENU" key twice. Press the right button to move the cursor to the "ZOOM" position, then press the "MENU" button twice without letting go until the factory mode adjustment menu appears.
Great Wall Monitor
(1) Great Wall 1770DI and Great Wall G702FSJ monitor: press and hold down the "8" key and "F" key at the same time in the standby state, and then turn on the computer until the screen lights up and then release it, then press the "F" key to turn on the computer. Then press "F" key to enter the factory mode. After the adjustment, press "EXIT" key to exit the factory mode.
(2) Great Wall C-1524 monitor: press and hold the "SELECT" key in standby mode, and then turn on the power until the adjustment indicator is fully illuminated, then enter the factory mode.
Select Lenovo monitors
(1) Lenovo (TPV) three-key machine: press and hold the left and right keys at the same time, and then press the power switch to turn on the machine to enter the factory mode.
(2) Lenovo new three-key machine: in the power-on state, if you press and hold the left and right keys at the same time, you can enter the regular project debugging state of the factory mode. If you press and hold the upper and lower keys at the same time, you will enter the bright and dark balance adjustment.
Borrow Philips monitor
1 Philips 109B2 monitor: after power on, press and hold the left "T" key and the right "U" key at the same time, after 15 seconds to enter the factory mode.
(2) Philips 105S5 monitor: press and hold the left "-" key and the right "OK" key at the same time, then press the power switch to turn on the monitor, then the factory mode adjustment options appear on the monitor screen. ^'BRN:k4P f
The factory mode adjustment option can be accessed by pressing the left and power buttons at the same time for a few seconds before selecting the degaussing option in the "OSD" menu.
(2) LG775N monitor: press and hold down the left button and "set" key under the power-on state, and use the "down" key to adjust the icon to the lowest item, that is, to enter the factory mode. And then press the "right" key, in the right side of the screen appears "RDDV, SCON, BCUT, ABL" and other options, use "up" "down" and "left" key to adjust the icon to the bottom one, that is, enter the factory mode. "Up" "Down" and "Left" "Right" keys can be used to adjust the value. Press "set" to store the adjusted data.
9, HPC monitor
1 HPC monitor: press and hold down the "+" and "?" keys at the same time. key to power on, enter the "factory settings" state, and then press the "U" key to enter the factory mode adjustment. 91xiubbs.comChinese Computer Repair Network - China's most authoritative and highly technical repair technology thematic website. na^WT2m
(2) HPC Shuttle Monitor: Press the Shuttle button on the monitor, turn on the power switch, and then enter the Factory Mode when the screen lights up.
10, CST monitor
First enter the menu, select the "EXIT" option, and then press and hold the shuttle key for 10 seconds to enter the factory mode.
11, Ubisoft E653, E70 monitors
Control panel from left to right **** four keys, counting from the left, while holding down the first and fourth two keys and then turn on the computer, you can enter the factory mode.
12, Meg 15-inch monitor
Press the shuttle single key on the monitor and do not let go, and then turn on the monitor power switch, 5 seconds after the screen lights up, you can see the user adjustment menu is located in the middle of the screen on the top, and is a blue background, the factory mode menu is located in the upper-left corner of the screen without a blue background, and the items of its adjusting menu and the form of the appearance of the same with the user mode, and then release the The items and forms of the adjustment menu are the same as those of the user mode in appearance, then release the shuttle key to enter the factory mode. Before entering the digital adjustment, first rotate the shuttle key clockwise to "ESC", then rotate it clockwise for one frame, a pink highlighted area will appear in the middle and lower part of the oval menu group, there is no text logo in the bright area, and the lower corner of the menu group shows "FACTORY". "At this time, press the shuttle key to display the factory-adjusted items. After adjustment, rotate the shuttle key to highlight "Exit", then press the shuttle key to exit the factory mode.
13, ACER 7154E monitor
After shutting down the computer, press and hold down the "SELECT+" and "ADJUST+" keys at the same time, and then press the power switch to turn on the computer, you can enter the factory mode.
!
14. WESCOM W770FS monitor
Press and hold down the "Menu" key and "Brightness" key at the same time, and then turn on the power, then the monitor will enter the factory mode.
15.AGD MONITOR
Press and hold "MENU" key and "EXIT" key in standby mode, then turn on the power, and then release it when the screen lights up, then the monitor enters the factory mode.
16. BenQ 77G monitor
After shutting down the computer, press and hold down the "EXIT" and "ENTER" keys at the same time, and then press the power switch to turn on the computer, then the screen will appear in the factory mode to adjust the option.
17, Patriot 77A, 777Q monitor
After turning off the monitor power, first press and hold down the "OSD" key and "Adjustment" key at the same time, and then press and hold down the power switch key, and then wait until the screen lights up and release the "OSD" key and "Adjustment" key. When the screen lights up, release the "OSD" key and "Adjustment" key, then enter the factory mode.
18, Samsung monitor
Press and hold the "EXIT" key on the control panel for 10 seconds until the indicator light blinks once, that is, enter the factory mode.
Two, debugging instructions,
1, in the factory mode to adjust the monitor setup parameters, be sure to adjust the initial value of the item recorded, and in the adjustment to adjust bit by bit, never hold down the keys do not let go of the digital fast adjustment.
2. The method of entering factory mode is different for different models of monitors. Many miscellaneous monitors can generally be used to "hold down the menu key, and then press the power on" method to enter the factory mode. If you still can not enter the factory mode state, you can visit the production of the monitor manufacturer's website query. 91xiubbs.com, computer drawings, motherboard drawings, computer repair, home appliance repair 3IRQK/z
3, in the adjustment of the option data, some monitors do not need to be stored, adjusted an option, the memory will automatically save the value; some need to select the storage will be just set and change the situation to save. For example, TCL MF767 monitor in the adjustment of color temperature, you need to select "EXIT" to save the adjusted value, if you directly press the monitor panel "EXIT" can not be saved. If the adjustment method is correct, but after restarting the monitor, the adjustment value set last time no longer exists, it may be that the memory has been damaged, and you need to use a special memory to re-adjust.
4. After the adjustment, you can open a monitor test software to test and check whether the monitor parameters are qualified.