When the zero gear is pressed, the refrigerator will stop working and the temperature light will be turned off. Under normal circumstances, 1 to 5 are working files, and the factory default is 3 files.
In winter, because the ambient temperature is relatively low, in order to save electricity and prevent the temperature in the box from being too low, the temperature can be set at the second gear. Some Siemens refrigerators may have a button switch on the thermostat, which is the switch of the temperature compensation electric heating device. Remember to turn on this switch if the ambient temperature is low.
Extended data:
The correct use of the refrigerator and matters needing attention are as follows:
1. The tilt angle of refrigerator should not exceed 45 degrees during handling and placing;
2. The refrigerator should be placed away from heat sources, direct sunlight, well ventilated and dry places;
3, properly adjust the bottom corner screws or gaskets to keep the refrigerator level and minimize noise;
4, should use a separate single-phase socket with grounding. The plug-in wire must be grounded, and the metal part of the refrigerator will stop when it feels numb during use;
5. After the newly bought refrigerator is used for a period of time, it is necessary to clean the inside, otherwise it will bring adverse effects to the food (after cleaning with warm water and a little detergent, it can be wiped with water).