ETC use precautions illustration

1. Before using ETC to pass through the toll booths, it is important to note that the ETC card must be inserted correctly into the OBU before the ETC vehicle passes through the ETC lanes, and that the ETC card may become loose due to the bumps during the driving process, so it needs to be checked in a timely manner, and then inserted into the OBU if it is loose.2. The ETC card must be exclusively used for the special vehicles, and tied to the vehicle

The etc device can be installed by itself Is it good to install

etc equipment should be installed by bank professionals, because it is necessary to record the owner's information and activate the equipment. If the device is already activated at the bank, you can install it in your car yourself.

Generally speaking, there are three locations where the etc device can be installed, namely on the front windshield of the car, on the center console of the car, and in the glove box, as explained below.

1. On the front windshield of the car:

Installing the ETC device on the front windshield of the car is the most common and traditional way to install ETC. Generally, the bank staff will install the ETC device on the right side of the small black dot on the front windshield of the car. The advantage of installing it here is that it increases the sensing area of the detection equipment at the toll booth, and also allows it to automatically complete solar charging without affecting the driver's line of sight.

2. On the center console:

It is easier to install ETC on the center console of a car, and it can usually be placed in front of the passenger so as not to block the driver's line of sight. However, installing ETC on the center console has a drawback, which is that it will make the center console of the car look messy and affect the aesthetics.

3. In the glove box:

Some car owners directly put the etc in the glove box, and need to take it out and lift it up to the front windshield to sense it when passing through the toll booths, which is more troublesome.

etc use precautions illustrated

1. In the use of ETC through the toll booths, it is necessary to pay attention to, in the ETC vehicle through the ETC lanes before the ETC card must be correctly inserted into the OBU, the driving process due to the bumps, the ETC card may be loosened, you need to check in a timely manner, such as the loosening of the inserted into the OBU.

2. ETC card must be Dedicated to special vehicles, can not be replaced at will after binding with the vehicle.

3. At present, ETC lanes can not be used in the domestic construction of the same location of the provincial border station, to wait for the full realization of the ETC network can be used.

4. Before using ETC, you need to pay attention to the fee information displayed on the special lane display board. If the card balance is insufficient, you need to top up the card in time.

5. When a car passes through the ETC lane and the barriers are not lifted, it should actively obey the arrangement of the staff at the toll station or be diverted to the manual toll lane.

6. When the ETC toll lanes are temporarily closed due to highway toll booths, you should use the manual toll lanes to pay the tolls.

7. The speed limit of ETC lane is 20km/h, and you need to keep a distance of more than 5 meters from the vehicle in front of you before passing.

8. ETC vehicles, if you get a pass in the manual toll lanes, can not take the ETC toll lanes after leaving the highway, but need to take the manual toll lanes. ETC equipment can be installed by yourself is it good to install etc use precautions illustrated @2019