Seeking equipment to measure harmonics, electromagnetic interference

1 German SPS company provides harmonic scintillation measurement system is the world's most perfect nowadays, the most flexible configuration of the system, the power of the equipment to be measured (EUT) can be from 1kW (220V voltage, current 4A) up to 90kW (38V, three-phase power supply conditions, the current is greater than 75A; or 120kW/three-phase 380V output conditions, the maximum current of the EUT is not less than (100A) - to meet IEC61000-3-2/3/11/12, at the same time to meet the IEC 61000-4 series of power-related immunity test

2 These configurations of the system, can meet: (Note: to meet the IEC61000-3-11&12 need to meet the PAS power is large enough - the specific power size, refer to the PAS series) ...)

* Harmonic measurement meets IEC 61000-3-2, IEC 61000-3-12

* Scintillation measurement meets IEC 61000-3-3, IEC 61000-3-11

In addition to harmonic scintillation measurements, the above configurations can be used to meet the following requirements with software support:

IEC 61000-4-11, IEC 61000-4-11, IEC 61000-4-11, IEC 61000-4-11, IEC 61000-4-11, IEC 61000-4-11, IEC 61000-4-11 and IEC 61000-3-11. 61000-4-11, IEC 61000-4-13, IEC 61000-4-17

IEC 61000-4-27, IEC 61000-4-28, IEC 61000-4-8

With CE-TESTER and other types of pulse signal generators produced by HILO-TEST, Germany, with corresponding coupler and signal generator, and with the corresponding coupler and signal generator. Generator, with the corresponding coupling decoupling network can be realized:

IEC 61000-4-4, IEC 61000-4-5, IEC 61000-4-11

SPS's harmonic scintillation system has a good reputation in the world for the world's major electrical appliances, electrical and electronic equipment manufacturers used, such as Siemens, Sony, LG, IBM, etc. (Beijing Qianli Shunfeng Telecommunication Technology Co., Ltd. provides you)