How to choose a kitchen cabinet and its installation steps 1 How to choose the edge of kitchen cabinet kanban
High quality cabinet board is soft and clean. Once the large-scale linear edge bender is completed, the general factory can ensure the most accurate measurement; Paint is brushed in the workshop. Because there is no pressure, the wallpaper knife is manually sanded, trimmed and sealed. The manual pressure is not strong even in some places.
2. How to choose the kitchen cabinet to see the hole?
You can see the stamping of cabinets, and the panel furniture is equipped with a three-in-one 1 connector. The applicability and accuracy of hole position will affect the structural rigidity of cabinet.
3. How to choose the cutting board for the kitchen cabinet?
In the time control process of materials and technology, large professional manufacturers use computer electronic cutting saw to control the dimensional accuracy of several plates, and the equipment performance is stable, and the cut plates are very large in size.
4. How to choose the door panel for the kitchen cabinet? The surface quality of door panels must be good. Poor surface treatment of the substrate is easy to cause the humidity change of the door panel.
method of erection
1. How to choose the installation area of kitchen cabinets and clean them in advance?
Grouted kitchen cabinets before tile installation should be suitable for medical appliances such as brooms or mops, and ground cabinets and wall cabinets should be placed in clean areas in advance.
2. How to select and mark the hidden pipes of kitchen water and electricity in the kitchen cabinet?
The installation of cabinets and hanging cabinets needs to be caught by nails when drilling holes in the wall. Because there is no contact with the underground pipe wall where the pipeline is installed and the first waterway is changed, the position is beyond the display.
3. How to choose and install kitchen cabinets?
This is the first step of the whole cabinet installation process. Everyone should clean the floor before installation. The most common ground cabinets are L-shaped and U-shaped. The installation of cabinets is divided into three stages, so you must carefully measure the size of the kitchen, find the benchmark and finally connect the cabinets. Subsequently, it is very important to connect cabinets by installing them when the ground plane is known and measured.
4. How to choose and install kitchen cabinets?
The second step of the whole cabinet installation process is to ensure that the cabinet is firmly connected and the horizontal line keeps an appropriate distance from the workbench. After installing the cabinet, the height of the cabinet must be adjusted. The height of the cabinet directly affects the beauty of the cabinet.
Step 5 install the desktop
After installing cabinets and wall cabinets, the desktop installation is more beautiful. Pay attention to the seasonal bonding time when installing the sink. At present, most consumers use artificial stone or natural stone sinks on the countertops of cabinets, and several stones are combined together. The combination of stone table top, polishing and glue will affect the beauty of the table. It usually takes one and a half hours in summer, and half an hour with professional glue.
Step 6 install hardware
Kitchen hardware includes faucet, sink and switch panel. When hardware needs to be sealed with hoses and pipes, buy and install adhesives, because we affect our quality of life, and we must be careful.
7, stove installation
Generally speaking, the last stage of this installation process is the same as installing a range hood or carefully considering the size of the box.
Tubatu Online provides you with "every decoration quotation, 1-4 local decoration companies, 3 sets of decoration design schemes" and the decoration pit avoidance strategy for free! Click this link:/Zhu Ye /zxbj-cszy.php? to8to _ from = SEO _ zhidao _ m _ jiare & amp； Wb, you can get it for free ~