Production safety meeting minutes sample 6

Production safety , is to ensure that all walks of life in all sectors of society stable and prosperous prerequisite. Do a good job in production safety is an important political task to protect the lives and property of the people, held a meeting on production safety, for the record of this meeting, this article is a sample of production safety meeting minutes, for reference only.

Model production safety meeting minutes

xxx (enterprise abbreviation)-C-AQB-JL001

Name of the meeting Safety Supervisors Meeting

Meeting time Year month afternoon Meeting place

Presiding Officer Records

Attendance

Meeting content:

This meeting was chaired by xxxxxx, at which according to the general manager of the cadres held a regular meeting of the spirit of the general manager, as well as recent supervision and inspection of the work of some of the phenomena found in the work of the next step of the work of a new deployment.

1, safety supervision and inspection. By the original monthly increase to two times a month, the main participants in the safety officer, the main person in charge, according to the inspection of the situation of the rectification instructions; the end of each month to convene a regular meeting of the security, informed of the recent security work.

2, safety inspection system. On-site inspectors, safety officers, managers and other personnel should inspect and register each part according to the system. Inspection frequency is low, not according to the system implemented in accordance with the relevant provisions of the penalty; rolling mill in the thin oil station plus a record book, personnel inspection and other in and out of a good registration.

3, plant vehicle management. Now we have more cars in the company, shovels, trucks, trucks, trucks, excavators, trucks, etc., to strengthen the supervision and management of the site personnel, especially construction vehicles, to survey the construction site, found violations, must stop or notify the Ministry of Defense to deal with.

4, subregional set of security responsibility, special workers pre-job training. Special steel, high line production is imminent, now to start the development of the region's part-time safety responsibility; the position of the safe operating procedures to be compiled into a booklet, the staff to carry out targeted training.

5, the use of operating tickets. At present, we work at height, fire operations, into the confined space operations more, but the use of individual operating tickets or not in place, for operating tickets signed by personnel at all levels at the same time is also a notice to you to view its precautionary measures and to arrange for personnel to check the assistance, which also reflects the degree of attention to safety. The next step in the inspection found not to handle the operation ticket to be punished in accordance with the provisions of the law, if found unauthorized operation doubled the penalty.

6, the project safety labeling production on the wall. Now the high line has been done in part, done to use as soon as possible, especially the gas station, power distribution room, the operator's desk and other parts of the test run soon, the operator, outsiders play a warning role; special steel part of the safety signage collected to make; new plant signage must be based on the issued national regulations to do.

7, smoking is strictly prohibited. Now every day has been arranged to check the personnel, the night from time to time surprise inspections, on-site if you find people smoking all according to the provisions of the treatment, no matter what the situation, we have to notify in place, including our employees and foreign construction team.

8, lightning self-test. Each plant with a motometer on the gas station, distribution room grounding to do a self-test to see if the grounding is in line with the regulations; now there are units to reduce lightning, electrostatic damage to electrical appliances or wiring, etc. in the gas station so that dangerous parts of the installation of the surge device, in order to prevent damage to the study of whether we want to install.

9, summer is coming, to do a good job to prevent heat stroke and guttering and other cleanup. Employees to increase part of the cooling water and other measures; part of the equipment to do a good job checking; high temperatures on the traveling car, air conditioning to do a good job checking Repair, the project on the new car to urge the press on the air conditioning. Before the rainy season, be sure to clean up the gutter, workshop roof gutters, repair damaged downpipes, in order to prevent rainwater recharge or drenching equipment, the project's various construction teams low-lying temporary lines to do a good job of cleaning up, in case of accidents.

10, traffic safety. The project has been entering some of the new employees, emphasizing good traffic safety at the same time, now to do a good job back to the beginning, let them develop good habits. >

Participants: Brewing 127 workshop grass-roots managers

Meeting content: to strengthen production safety, enhance safety awareness

The meeting centered on the workshop production, closely production safety of four specific requirements:

1, brewing 127 workshop safety production management, is a top-down management approach, as managers at all levels must grasp the safety link.

2, emphasize the awareness of safety production (class members can not just focus on production, thereby ignoring the safety), including the process of commuting to and from work in the safety of the car, to do rather than stop for three minutes, do not grab a second, the brewing of the three workshops in this link has also been out of a few car collision accidents, but fortunately, no serious injuries occurred.

3, each class before work, after work should be a comprehensive inspection of the existing Yang lees machine, power lines, etc., such as the discovery of anomalies, should be promptly notified to the workshop, together with the power maintenance personnel to deal with the existing equipment is strictly prohibited to operate with disease.

4, safety training for new employees before starting work (workshop more or less because of the need to work will increase the recent employees, section chiefs, team leaders should be timely job safety training, and require special reminders workshop on the handling of safety requirements).

5, emphasizing the wearing of labor protection products, especially workshop production due to excessive starch in the bad, falling on the marble floor without timely cleaning will cause slippery phenomenon, class members should pay attention to the work of non-slip, wear good anti-skid shoes.

6, special emphasis on the class staff in the operation of the machine, should strictly comply with the operating specifications, non-self-operated equipment or electrical appliances, etc., do not trespass on their own start.

7, the workshop for the current production safety situation, highlighting the existence of workshop problems detrimental to safety, such as smoking cigarettes, along with the abandonment of cigarette bad behavior, the workshop emphasized that the discovery of a smoking behavior, a fine of 60 yuan / times, found the second time, no matter who,

fine of 120 yuan / times, and so on cumulative.

Safety production meeting minutes: Ao Chunhua section chief on the specific problems in April to do a detailed analysis, focusing on April there are individual employees' family members to the workshop events, as well as the evening shift after work to clean the machine when the individual classes in the case of no stopping to stand in the machine conveyor belt to clean the dangerous events, the workshop asked to require the shift section chiefs to strengthen the management, to prevent the occurrence of accidents. The section chiefs and shift leaders expressed their views and actively participated in the discussion of production safety issues.

Liu Yuehua, Ao Chunhua, Yang Xinlin at the same time on the existing work sets of shoes anti-slip function requirements, it is recommended that the company's work sets of shoes must be acid-resistant and anti-slip role to protect employees from injuries caused by slipping.

Shift supervisor Zeng Zhiqiang put forward some constructive comments on the safety training of employees, standardize the operation and improve the insurance system. Shift Supervisor Luo Guosheng put forward a novel idea of "teacher and new apprentice" contracting safety responsibility for the construction of team safety, which was positively responded by all present.

Safety production meeting minutes: Ao Chunhua, Liu Yuehua, etc. on the existing workshop safety training to put forward many constructive ideas, such as determining the norms of operating skills. Attention has been drawn to the workshop, requiring practical measures to be taken in the future to adjust and implement.

Finally, as the production safety supervisor of the brewing 127 workshop, once again introduced the workshop personnel safety structure: brewing 127 workshop safety team leader: Xu Xiangsheng, deputy team leader: Ao Chunhua, safety team members: section chief Liu Yuehua, Yang Xinlin, the head of each shift. Requirements for the future implementation of safety management responsibilities, everyone **** with the improvement of the company's safety management level.

Meeting Agenda: Safety Work Conference

Meeting Time: xx year x month x day

Meeting Content:

First, the installation of electrical facilities regulations

The meeting on the installation of electrical facilities requirements made provisions: In the future, the units in the installation of Electrical equipment, facilities must be installed in accordance with the standardization of production safety requirements, unified standards. For example: equipment installers should be in accordance with the requirements of the three-phase five-wire system for the design and installation, manual (mobile) tools socket front to install leakage insurance, socket plate, control box and other power supply facilities to ensure that the PE line (zero) in place and so on.

Second, the layout of the 20xx annual safety and environmental protection assessment work

Combined with the actual group, the 20xx annual safety and environmental protection assessment in 20xx on the basis of some adjustments:

1. The assessment time is adjusted to: January 1, 20xx - 20xx September 30;

2. The Company's more significant personal injury accidents (refers to medical) adjusted to 15,000 costs) is adjusted to 15,000 yuan;

3. The total amount of safety and environmental protection assessment is adjusted to 100,000 yuan;

4. 20xx annual safety and environmental protection accidents occurring in excess of the annual assessment index, the penalty amount is adjusted to 50% of the exceeding portion of the amount of the penalty (30% in 20xx);

Third, other work to inform

1. 20xx annual Safe production work innovation declaration, each unit if in line with the "safe production reward and punishment management system" award terms, in December 10 before the written materials will be reported to the Logistics Support Center Safety Supervision Department .

2. All units must be completed at the end of December department, team safety responsibility book signing work. Responsibility for the standardized format requirements, the content of the provisions of last year's basis, according to the actual adjustment of the unit.

3. "Safety and security management system" 3.3.1 During the work of the employee out to be approved by the supervisor of the employee's unit with the "leave application form" or "travel approval form", go out in the janitorial office for the record.3.3.2 For the shuttle to the north and south of the plant employees, the shuttle driver is responsible for supervision. If it is found that those who get off the bus halfway to do private business, the shuttle bus driver should give feedback to the Safety Supervision Department of the Logistics Support Center, and inform the relevant units after investigation and verification. From December 1, the janitorial offices will be strictly in accordance with the implementation of the system, please do a good job related to the work of each unit.

Fourth, the next security focus on work reminders

1. Through the standardization of production safety to achieve the standard, the basic management information of each unit has been basically perfect. Next, each unit should rectify the existing problems in a timely manner, and the future work should be implemented in strict accordance with the standardization requirements.

2. Before the installation and layout of equipment, each unit should be from the direction of long-term development, scientific and reasonable layout according to the standardization of production safety requirements, to avoid repetitive rework.

3. Strengthen the production safety management of special equipment, the relevant responsible departments should be in accordance with the provisions of the safety inspection and make records. For equipment that requires inspection and testing, the responsible department must test according to regulations. Boilers, pressure vessels, lifting machinery, elevators, pressure gauges, safety valves, etc. must be used in the testing cycle.

4. Strengthen the production safety management of special operators, unlicensed personnel are not allowed to operate; licensed personnel must be standardized, standardized operation, and shall not violate the rules and regulations of operation.

5. Strengthen the safety management of hazardous chemicals: the use of personnel to set a person, set a post, storage must be stored in accordance with the requirements of the storage, to strengthen the use of the process of safety control.

6. In addition to the infrared protection of the punch press, the small punch can be added to the protective net of the unit to be implemented in a timely manner.