Summary is after the fact of a period of time, a project or some work to review and analyze, so as to make a conclusion with regularity, through which you can correctly understand the strengths and weaknesses of the previous study and work, why not quietly write a good summary of it. Then you really know how to write a summary? The following is a summary of my graduation design (General 6), for reference only, let's take a look.
Graduation design summary Part 1
This graduation design is not very good, after the submission of the paper, still feel that there are not doing well, for the paper can not finally pass, I have no bottom, the following to Bishop's summary:
1, quickly into the topic.
Getting to the Bishop's topic as soon as possible to outline their own blueprints, can not take one step at a time, you must grasp the whole. And this time, I have a long time to know what I want to do.
2. Frequent discussions with your mentor.
Ask your tutor more questions, you can't do it by yourself, the direction is biased and still don't know, tell your teacher more about your ideas and thoughts.
3. Software learning.
Be sure to learn the software while doing, can not do during the Bishop, take this software tutorial from the first page to start reading, so that the efficiency of the lowest, it is best to be based on the existing thesis information mentioned in the software use, targeted learning. Including the pre-biography reading literature, can not be bored to read, to be closely linked with the biography, it is best to do while reading, targeted reading.
4, the more frustrated the more courageous.
Do Bishop, often feel the phrase: "the mountains are heavy and doubtful, dark flowers and a village." Usually, there must be a solution, just due to insufficient literature checking, or less of that inspiration.
5, can not be detached from reality.
Doing the BS should be meaningful, not floating on it, and make yourself satisfied.
6, more and more tight state, especially the last few days.
The more to the final stage of the Bishop, the more to have perseverance and state, can not be tight before and after the relaxation, think in front of a lot to do, the back can be relaxed.
A few days before the submission of the thesis, you have to check the thesis relentlessly, including the content, format and so on. The current Bishop, the paper has been printed, surprisingly, found that there are a few pages are not aligned at both ends, and go back to reprint. It is best to check one by one: figures, tables, formulas, fonts, line spacing, alignment. Overall one by one check to make sure everything is fine.
Graduation Design Summary Part 2With the arrival of graduation day, graduation design is also close to the end. After a few weeks of struggle my graduation design is finally completed. Before I did the graduation design, I thought the graduation design was just a simple summary of what I had learned in the past few years, but through this graduation design, I found that my view was a bit too one-sided. Graduation design is not only a kind of test for the knowledge learned in the past, but also a kind of improvement for my own ability. Through this graduation design makes me realize that my original knowledge is still relatively lacking. I have to learn too many things, used to think that I know everything, know everything, a little low-eyed. Through this graduation design, I realized that learning is a long-term accumulation process, in the future work, life should continue to learn, and strive to improve their knowledge and comprehensive quality.
In this graduation design also make our classmate relationship further, students help each other, what do not understand what we discuss together, listen to different views on our better understanding of knowledge, so here I am very grateful to help my classmates.
My experience is so much, in short, no matter learned or learned not to do indeed feel more difficult, really difficult to start, do not know how to start. Finally finished with a sense of relief. In addition, also came to a conclusion: knowledge must be applied to realize its value! There are some things that I thought I had learned, but I really realized that it was two different things when I used it, so I think it is only when I really will use it that I really learned it.
I would like to thank my instructor for his careful guidance and the help he gave me. In the design process, I through access to a large amount of relevant information, and students to exchange experience and self-study, and to the teacher to ask for advice and so on, so that I have learned a lot of knowledge, but also experienced a lot of hardship, but the harvest is equally great. In the whole design I know a lot of things, but also cultivate my ability to work independently, set up confidence in their own ability to work, I believe it will have a very important impact on the future study and work life.
And greatly improve the ability to do hands-on, so that I fully appreciate the creative process of exploration in the process of hardship and success when the joy. Although this design is not very good, but the things learned in the design process is the harvest and wealth of this graduation design, so that I will benefit for life.
Graduation Design Summary Part 3Graduation design is a good opportunity for self-expression, in the student era, especially the end of a certain undergraduate stage, but also a career path or the starting point for further study, in this process, should be fully to show their own, to fully to show his expectations for the future of an expectation, if it is to do graduation design from this point of view will be done very happily. The first step is to make sure that you have a good understanding of what you're doing.
Summary
The card system is very large, divided into a number of subsystems, each subsystem is divided into a number of modules, it is impossible to complete a person, it needs to be a team of sincere cooperation, we are divided into a clear division of labor, each of their respective duties, and differentiated from each other and interrelated. This design I am mainly responsible for the basic module of the third party docking. Used a powerful database programming tool delphi7, Delphi is known as the fourth generation of programming language, it has a simple, efficient and powerful features. Compared with VC, Delphi is simpler and easier to grasp, but in function is no less; compared with VB, Delphi is more powerful and more practical. It can be said that Delphi both powerful VC and VB simple and easy to learn features.
Prospect
Campus card system is a very complex system engineering, with the rapid development of technology, the concept of its non-stop forward extension of its interface applications will become more and more extensive, CPU card, cell phone card has begun to apply, card structure is changing, of course, with the docking of the various business systems also put forward new requirements. New requirements have been put forward, which requires us to keep exploring new demands and developing new technologies to make the system docking more perfect and the integration more in-depth. There is no best, only better, with the development of technology, there will be a new world for us to open up.
Acknowledgements
First of all, I would like to express my heartfelt thanks to my supervisor, Mr. Yen Hua, under whose guidance I was able to complete this thesis. Especially in the thesis topic selection and research methodology and ideas, I have received her careful guidance, which has benefited me a lot. Meanwhile, I would like to thank all the teachers in the college, especially the class teacher, Ms. Cao Minfang, for her help in the past two years, which enabled me to complete my study successfully. I would also like to thank my classmates who have completed their studies with me. Finally, I would like to thank the teachers and leaders of the college, it is your hard work, so that our basic knowledge has once again been consolidated, so that the theory can be combined with practice, not only to complete their studies, enrich themselves, but also more conducive to the development of my future work.
Graduation Design Summary Part 4Undergraduate graduation design lasted two and a half months, in these two and a half months, I can according to the expected schedule, on time and on time to complete the design task. In the early stage of design, I reviewed the knowledge of Structural Mechanics, Steel Structure and Reinforced Concrete, and checked the specifications of Steel Structure Design Code and Load Code. In the middle stage of design, I utilized the learned professional knowledge to carry out architectural and structural design. In the late stage of design, mainly carry out the drawing of building and structural drawings. During the design period, I received guidance and help from many teachers in the School of Architectural Engineering, and I would like to express my deep gratitude.
Graduation design is the comprehensive application of the knowledge learned in four years of college, is the training of theory and practice. Through the graduation design, I reviewed the professional knowledge I learned in the classroom, and learned and experienced the basic skills and ideas of building structure design. I y realize that: as an engineer, we should have a rigorous scientific attitude, in line with the idea of building people-oriented, and strive to achieve safety, economy, practicality, durability, aesthetics; the design process should be in strict accordance with the requirements of the building code, but also think about the coordination of various types of coordination and cooperation, individuality is the exchange of structure and building, structural design and construction coordination. This requires engineering designers to have high comprehensive quality, not only to grasp the main contradiction of building structure design, but also to think about some details. In the process of graduation design, I y realize that the specification is the beacon of design, and it is imperative to think and experience more. In the future study and work, to constantly strengthen the study and understanding of the specification, only then, there will be no mistakes.
Mutual learning, focus on communication. In the design process, we encountered a lot of problems, be sure to study hard and ask questions, and strive to play the crowd's attentiveness and creativity, and fully tap the potential of the team, so as to improve the efficiency of the work. In engineering practice, it is imperative that the wisdom and strength of the masses, so we should focus on the cultivation of team spirit.
"Raise an army for a thousand days and use it for an hour." In the graduation design, I was pleased to be able to use the four years of study, at the same time I y feel the importance of basic knowledge. When studying professional courses, I always feel that the knowledge I have learned is too far from the actual. This kind of quick success and quick profit idea makes myself relax on some professional courses, in the process of graduation design, I y appreciate the meaning of "the book to the time when it is hated". In the future learning life must not be in a hurry to achieve and ignore the solid foundation. "Ten thousand feet high building from the ground up", and effectively achieve the theory and practice, learning to use.
Graduation design is a very important stage of undergraduate education, I initially mastered the basic theory of building structure design, methods, steps. In the future learning life, I will strengthen the study of professional knowledge, and strive to become a good engineer as soon as possible. I would like to thank my teachers and classmates who helped me in my graduation design.
Acknowledgements
The successful completion of this design, first of all, I would like to thank my instructors and tutors. They are knowledgeable, rigorous and approachable, in their careful guidance, I not only learned solid professional knowledge, but also for the future work to lay a solid foundation; their rigorous attitude of study, meticulous work style and tireless nurturing spirit so that I benefited a lot. In the whole process of design, give me careful guidance and help, for our design to pay hard labor, pouring more time and energy, here to express their sincere respect and heartfelt thanks.
I would like to thank all the teachers and classmates who have helped me before in the School of Architecture and Engineering, Southwest Petroleum University, for their teaching and help, which has enabled me to gain a lot of knowledge and successfully complete my studies, and I would like to express my deepest respect and heartfelt gratitude to them.
Finally, I would like to thank all the teachers, classmates and friends who gave me support and help in the process of thesis writing.
Graduation Design Summary Part 5
The topic was just received, I began to figure out the ideas, received the title of the graduation design to begin to write the paper, the chapter formatting, and then to the final completion of the thesis article, each step is a new attempt and challenge for me, which is also the largest project I have independently completed during my college years. During this period of time, I learned a lot of knowledge and a lot of feelings, I began to study and experiment independently, checking the relevant information and books, so that the fuzzy concepts in their own minds gradually clear, so that they are very young works step by step to improve up, every improvement is the harvest of my learning, and the success of every experiment will make me excited for a good period of time.
Although my thesis work is not very mature, there are many shortcomings, but I can proudly say that every piece of code in this, have my labor. When I look at my own program, my own day-to-day companion of the system can be a healthy operation, is really a great happiness and comfort. I believe that the sweet and sour will eventually turn into a sweet spring.
The experience of doing the dissertation will also benefit me for a lifetime, I feel that doing the dissertation is a thing to be done with real dedication, it is the process of learning and researching on your own, without learning, it is impossible to have the ability to research, and without researching on your own, it will not be a breakthrough, and then it is not called a dissertation. I hope this experience will inspire me to continue to make progress in my future studies.
This time my thesis topic is based on the AT89C51 microcontroller stepper motor control, which is a wide range of topics, unlike the previous course design in the school class, the kind of a separate one to determine the topic, as long as the topic is extended in accordance with the title can be. This time, I had to think about the topic by myself, and it seemed to have a wide scope, but it was actually very difficult. Because the amount of knowledge involved is very wide, which requires their own summary of the overview, expressed in their own words, but also tightly around the subject play.
Although the course design is required to complete their own independent, but, each other still can not detach from the collective power, encounter problems and students to discuss with each other. More discussion with classmates. We have to keep discussing the problem in the process of course design, so that we can unify the idea as much as possible, so as not to make themselves in the process of doing no direction, and this is also to facilitate the design together. Discussion is not only some of the ideas of the problem, but also in-depth discussion of some technical problems, so that they can make their own to deal with the problem to be faster, less detour. More changes in their own design methods, in the process of designing the best to keep improving their own problem-solving methods, so that they can facilitate their own problem solving
Through this design, let me a good exercise in the theory of practical, and specific projects, the subject of the combination of the development and design of the product's ability. Both let us know how to apply the theory in practice, but also let us know how to use the theory to solve the problems encountered in practice. In this design, we also need a lot of previously unlearned knowledge, so the library and the network became our good assistant. In the process of access to information, we have to judge the advantages and disadvantages, trade-offs between related knowledge, unknowingly our ability to access the information has also been a good exercise. The knowledge we learn is limited, in the future work we will certainly encounter many unknown areas, this ability will benefit us greatly. In the design process, we always encounter this or that problem. Sometimes when I find a problem, I need to do a lot of work and spend a lot of time to solve it. Naturally, my patience is built up in it. For the future work has accumulated experience and increased confidence.
In doing this subject, it is inevitable that I encountered difficulties, but fortunately, with the help of the teacher, as well as the help of classmates, I finally finalized my graduation design. In more than two months of design, the experience is as follows:
First of all, whether it is studying, working or doing this graduation design, we have to be attentive, learning to learn ideas, work to be organized, graduation design also have to be attentive to think, to clarify their own ideas, how to write, how to make the chapter reasonable and smooth, all of these are to be attentive to think.
Second, be patient and careful. Graduation design is not a day or two can be completed, but time-consuming and labor-intensive tasks, if there is no patience, then nothing can be accomplished, each detail we should pay attention to, each figure we should look at, these no do not have enough patience and care.
Third, responsibility. No matter what you do, the essential thing is responsibility, a person does not have a sense of responsibility, then certainly can not do anything, in the graduation design period, I have also flinched, I have been lazy, but I know, do a good job, not only is responsible for their own responsibility, but also responsible for others.
Fourth, be good at communication. Graduation design encountered in the details of the problem in fact, we can also be exchanged between students and ask the teacher to solve, and all of this, all lies in the word, communication.
After the graduation design, I have some understanding of stepper motors, PLC program design and some microcontroller chips. Finally, we should also have the spirit of pioneering, in the design of many do not understand the problem is normal, and at this time we should not choose to retreat, but should rise to the challenge, their own access to books, ask the teacher, classmates to discuss, online access, and so on means are available to solve the problem, and these problems will be solved will become our wealth, we will be able to benefit from the whole life. We should always believe that "the method is always more than the difficulty", more difficulties always have a solution, we as a person who is about to leave the school to enter the community, must have such a spirit, in order to be able to establish a foothold in the community, in order to look forward to the future. Two months is not long, not short, all the way, a little hard, but through the last big thing before leaving school, I feel a lot of growth, maybe this is the real life. For the real work of leaving school soon, maybe I can learn more from this graduation design, which can let me adapt to the society faster and determine the self-positioning faster. In short, this graduation design will be the wealth of my life, in the discovery of their own shortcomings at the same time, but I am more confident, because, I know, I can progress a little more!
Graduation design summary Part 6
In the university three years will soon be rushed past, leaving only the time to do graduation design now, which is a summary of what we have learned in the three years in school.
Graduation design is to train students to comprehensively apply the knowledge they have learned, to discover, propose, analyze and solve practical problems, exercise the practical ability of an important link, is the actual work of the students ability to specific training and inspection process. With the development of science and technology day by day, microcontroller has become today's computer applications in the field of unprecedented activity, in life can be said to be ubiquitous. Therefore, as a university in the twenty-first century to master the microcontroller ` development technology is very important.
The microcontroller application system is an organic combination of reasonable hardware and perfect software. Software is a variety of instructions in accordance with a certain combination of laws to form the program. The task of programming is to use computer language to describe and specify the tasks to be completed by the system. The program design of microcontroller mainly uses two languages, one is assembly language, the other is a high-level language. Nowadays, we use assembly language because it generates a target program that occupies less storage space and runs fast and efficiently. It is straightforward and convenient to manipulate the hardware resources of the microcontroller.
In the process of doing graduation design teachers only give us guidance, and the vast majority is to rely on our own to find information, through their own hands to find the problem so that their own problem solving, this is a real exercise, but also in the cultivation of our creativity, for us to the community to lay a solid foundation! Our graduation design school arrangement is eight weeks, the design of the subject is, the principle used is mainly a microcontroller, which is also based on the development of society and specially formulated. Microcontroller technology in today's society to get a wide range of applications, it to penetrate into all aspects of our lives, such as numerical control machine tools, medical equipment, automotive equipment, mobile communications field, city lighting and electronic digital products. Monolithic has a small size, light weight, inexpensive and other characteristics, so home appliances with a microcomputer, so that it doubled the value of stronger functions, easy to use, flexible, popular with users. In addition, it can be applied to the actual production, using this technology to improve the production line workpiece counting problems. Through the access to information, to put forward their own ideas and draw circuit diagrams, we spent about three weeks, we take their own design flowchart and circuit diagrams in the meeting with the instructor and the teacher reported to the teacher, the teacher gave us valuable advice put forward a number of problems, and solutions to the problem of the method of skills! We went back to the teacher's advice we did some improvements! Through the design of the subject, greatly improve their ability in all aspects of high, but in this, there is also their own bewilderment and overwhelmed by the side, and then after the teacher of the subject of the dissection, the mind is gradually awake.
I know, everything is difficult at the beginning, as long as the first part of the work is done, the back of the natural can be much smoother, so the collection of data is very important, the collection of information to take the best and discard the dregs, consult an experienced teacher, and finally got the first-hand information, and then add their own ideas in which to organize and sort out, and gradually have a head start.
After this design, experience a lot, feel the usual carelessness, as well as imperfect theoretical knowledge, but I feel a power in the process of making circuits, that power can let me sleep and sleep to constantly improve the debugging of the circuit, can let me be excited about a long time in order to the circuit and deep thought, review their own graduation design production process, the heart of a burst of emotion, there is loss, there is excitement, there is joy, there is distress! Looking back on my graduation design and production process, I feel a sense of emotion, loss, excitement, joy, and distress, but I think it is worth it, because it not only gives an opportunity to practice, and their hands-on ability is a great exercise. Practice produces true knowledge, throughout the ages, all inventions are not tested in practice. Without enough hands-on ability, we can't talk about making achievements in future scientific research, especially experimental research. In the middle, I practiced my hands-on skills and improved my problem-solving ability. Let me learn how to face the difficulties encountered in the production process, how to solve, let me learn to think, let me vaguely remember the knowledge I learned before, the original do not know what use to learn the principles of the boring circuit, and now let me in the practical application of the feeling of learning a lot of things, the heart of infinite regret. But this graduation design to my feelings is very real, very pure feelings, first-hand experience of its production of the difficult journey, which not only deepened my previous knowledge because of all kinds of confusion do not know the circuit knowledge, but also for my future life has laid the foundation, I believe that through the exercise of future learning, the theory of combining with practice, to contribute to society.
This design is not particularly good. But the microcontroller is indeed a very useful course, the future study and work have a great help, because the microcontroller is currently in the society has in and extremely wide range of uses, each place are inseparable from it. Only after the emergence of microcontroller, the computer is really from the hallowed halls of science into the common people's home, become the majority of engineers and technicians to modernize technological innovation, technological revolution, a favorable weapon. At present, microcontroller in the civilian and industrial measurement and control field has been the most widely used. Color TV, refrigerators, air conditioners, video recorders, VCDs, remote controls, game consoles, rice cookers, etc. Nowhere to see the shadow of the microcontroller, the microcontroller has long been y dissolved into the life of each of us. But I think we learned in the classroom to this knowledge is still extremely limited, more things also rely on our own to learn in class. Teachers only play a role in guiding us to learn, the key still lies in our own, this is the so-called "master lead into the door, practice in the individual" it.