Automatic spraying machine, also known as automatic spraying machine, is a kind of automated coating equipment, semi-automatic spraying machine and automatic spraying machine and so on a variety of dust, feeding, mold, spraying, painting, leaving the mold, drying, material, washing mold and other steps can be automatically completed, very convenient to use.
Second, the use of automatic spraying machine details and points
Automatic spraying machine covers an area of small, fast, economical and practical, but in the use of automatic spraying machine, to understand the use of paint spraying machine details and points:
1, in the workpiece into the spraying machine, each workpiece must be done before the pre-processing, pre-processing to do their best to achieve no oil, no dust, no debris.
2, set the parameters of the automatic paint spraying machine, must be in accordance with the instructions of the after-sales personnel of the paint spraying machine, the parameters of the wrong will lead to a variety of problems with the workpiece sprayed.
3, stop working, should be automatic paint spraying machine for cleaning, especially the residue of the gun should be cleaned off, so as not to affect the mobility.
4, automatic paint spraying machine is automated equipment, the operator needs to be trained to operate.
Three, how to maintain and repair automatic paint spraying machine
1, every day before the use of paint spraying machine, should pay attention to check whether the grounding protection is intact, the grounding line on the equipment and personnel safety plays an important role in the protection of the grounding abnormalities and other phenomena are not allowed to occur.
2, before use should check whether the oil pipe leakage, gas pipe leakage and other phenomena, found that the adverse phenomenon of timely treatment, treatment before the start of operation, regular or frequent check of the hose and its connecting parts of the leakage phenomenon.
3, every shift after the shutdown, need to be timely scrubbing attached to the paint spraying machine spraying space on the wall of the cavity and paint stains attached to the cylinder and the hose paint stains, in order to prevent hardening of the hose, and at the same time, clean up all parts of the machine and the surrounding working environment.
4, once a week to check the motor and worm gear box oil pollution and oil, if necessary, add or replace the oil (normal conditions half a year to replace the oil).
5, once a week to check the paint sprayer sprocket, chain lubrication and chain tension, such as slack, you can adjust the tensioning wheel to tighten the chain.
6, regularly replace the paint sprayer roller brush box cleaning solvent, and remove the precipitation in the box and the paint on the roller brush.
7, regular or frequent removal of paint residue in the line paint sprayer conveyor belt.
8, the spray gun should always be kept clean, careful cleaning. In addition to failure or replacement of spare parts, do not arbitrarily decompose the gun.
9, do not make the gun fell to the ground or hit by other objects.
10, paint sprayer nozzle is an important component, to maintain the nozzle, do not make it suffer any damage. At the end of each operation, should be carefully cleaned.
11, cleaning nozzle clogging, can not use wire and other metal piercing poke, should be soaked in solvent, and then blow with compressed air, can not use metal brush cleaning nozzle.
12, the nozzle in the process of operation should also be cleaned from time to time, otherwise attached to the nozzle part of the paint will affect the spraying quality.
13, after the use of paint sprayer to clean up the paint, as well as recycling the remaining paint.