With the rapid improvement of the industrial level, in order to avoid the pollution of the production environment, manufacturers are using dust-free workshop for pollution control. However, before the use of dust-free workshop, we will have some questions, that is, the dust-free workshop is harmful to the body? Clean room in the end what harm and so on, in order to solve the existence of these questions, the following Zhuo for the staff to introduce the clean room what harm:
1, the internal production process using or produced by the toxic and harmful gases, some welding, cleaning station, because of the use of solder paste, detergent and other hazardous chemicals containing harmful chemicals, the production process may volatile toxic and harmful gases, so must install and use the appropriate exhaust ventilation, the use of the clean room, the use of the clean room is very important to avoid pollution of the production environment. So we must install and use the appropriate exhaust exhaust system, the resulting gas will be discharged outside in a timely manner. As long as the exhaust system is properly installed, the fan power is sufficient, harmful gases can be discharged in a timely manner, the human body will not cause harm.
2, what are the harmful effects of the clean room, including possible lack of oxygen, because the clean room is a closed space, relying only on the air-conditioning unit according to a certain amount of airflow into the fresh air, so the number of people can be accommodated in the clean room is limited, if the number of people beyond this limit, may result in insufficient oxygen conditions, long-term work in the absence of oxygen, may cause discomfort or even dizziness. But as long as the number of people entering the strict control, you can ensure the safety of personnel.
3, complete fire fighting and evacuation facilities, dust-free workshop space is relatively closed, must be configured in accordance with the requirements of the fire suppression system, such as sufficient exhaust smoke facilities, fire extinguishers and fire hydrants, as well as to ensure that the evacuation channel is clear, otherwise in the event of an emergency, the personnel can not be evacuated in a timely manner, relative to the ordinary workshop will result in a relatively large number of casualties.
4, for the electronics industry clean room, to see whether the use of equipment with high radiation, such as ray detection equipment, there must be appropriate protective measures to avoid personnel injury.
5, some factories in order to improve the efficiency of work, in the clean room arranged too many people and positions. Clean room is quantitatively supplemented with fresh air, so the number of people entering is limited, if the number of people over this value, then each person can breathe enough fresh air, people will feel uncomfortable, serious and even chest tightness, headache.
6, so that the eyes quickly deteriorate, this may be related to the specific jobs engaged in, and the clean room has nothing to do. Some positions may require long-term eye, easy to cause eye fatigue, as long as attention to work and rest, proper rest can be.
7, some factories in the clean room using harmful chemicals, but not equipped with appropriate exhaust devices. Many electronic workshops use cleaning fluids, solder, etc., contain harmful chemicals, because the clean room environment is relatively closed, if not equipped with appropriate exhaust devices will produce exhaust gas timely discharge, these harmful ingredients will be repeated in the clean room cycle, causing physical harm to employees.
What harm for the clean room is shared here today, through the above introduction we can know, as long as the clean room as long as the measures in place, the clean room on the human body no harm, so we do not have to worry too much!