1. Serial port connection: Use a serial port cable to connect the serial port of the controller to the serial port of the computer. The serial port of the controller is an RS232 interface, and the serial port of the computer is also an RS232 interface. After the connection is completed, You need to install the serial port driver on your computer. For the driver installation method, please refer to the device manual.
2. Ethernet connection: Use a network cable to connect the Ethernet port of the controller to the network port of the computer. After the connection is completed, you need to set network parameters such as IP address and subnet mask on the computer. Enables the computer to communicate with the PLC controller.