1 The sterilizer should be placed on a flat and solid ground, and sundries should not be placed within 0.5m around.
2 Connect the power cord attached to the sterilizer with an external fixed power supply. Users are advised to use circuit breakers (220V-32A) or knife switches to ensure safety.
3 When the power supply is connected, it must be grounded, and the terminal marked "⊥" in the lower left corner of the rear panel of the equipment is the grounding terminal.
4. Connect the water pump with pressure ≥0.3 MPa to the back pressure inlet valve.
5. Connect the air compressor with pressure ≥0.3 MPa with the back pressure inlet valve.