In the era of continuous progress, we use letters of introduction more and more. There are two forms of letter of introduction, one is a casual letter of introduction, and the other is a letter of introduction with a stub. So, how to write a letter of introduction? The following are six letters of introduction for bidding compiled by me, hoping to help you.
1 Bid Letter of Introduction Registration Conditions:
1, with independent legal personality;
2. At the same time, it has the qualification of two-level professional contracting of architectural decoration engineering and three-level professional contracting of mechanical and electrical equipment installation engineering issued by the provincial and above construction administrative departments;
3. The qualification grade of registered construction engineer is decoration level 2 or electromechanical installation level 2 or above.
Documents required for bid registration:
1. Letter of introduction and business license of the enterprise (copy);
2. Legal person certificate or legal person power of attorney, client's ID card and labor contract;
3 qualification certificate (copy);
4. Safety production license;
5, intends to participate in the project bidding certificate of registered architect and my safety assessment certificate;
6. Five-member certificate and safety assessment certificate of safety officer; 7. Performance of similar projects (level II hospitals or above) that have been completed in the past 24 months (letter of acceptance, construction contract, construction drawings, proof materials for completion acceptance, but not including written proof materials, any two of the above materials). After checking all the original documents, leave a copy (stamped with the official seal of the unit).
Having the professional contracting qualification of building decoration engineering issued by the Provincial Department of Construction ≥ Grade II, or the professional contracting qualification of air purification engineering ≥ Grade III;
7, with the provincial construction department issued by the mechanical and electrical equipment installation engineering professional contracting qualification level 3 or above;
8. Having a safety production license issued by the Provincial Construction Department;
9. The qualification of the project manager to be stationed in this project shall not be lower than Grade II;
10, the pressure pipeline design certificate issued by the provincial quality and technical supervision department;
1 1. The certificate of installation, renovation and maintenance of special equipment issued by the provincial quality and technical supervision department can prove that its installation, renovation and maintenance categories and grades are: GC, GC3 or above;
Note: If the bidder is not qualified for the design, installation and maintenance of10-1pressure pipeline, if the bidding involves the design and installation of pressure pipeline, an enterprise with such qualification shall be invited to design and install it. When bidding, provide the following qualification documents for pressure pipelines and installation and maintenance enterprises:
(Copy of business license after annual inspection of 20xx;
② Organization code certificate;
③ Pressure pipeline design certificate;
④ License for installation, renovation and maintenance of special equipment (pressure pipeline), and its scope of installation, renovation and maintenance is: GC GC3.
(1) Business license for annual inspection of 20xx;
(2) tax registration certificate
(3) Organization code certificate of the enterprise;
(4) The professional qualification certificate of building decoration engineering is at or above Grade II (or the professional contracting qualification of air purification engineering is at or above Grade III);
(5) The professional contracting qualification certificate of mechanical and electrical equipment installation engineering is level 3 or higher;
(6) enterprise safety production license; ;
(8) Qualification certificate of project manager (level 2 or above);
(9) Pressure pipeline design certificate;
(10) License for installation, modification and maintenance of special equipment (pressure pipeline);
(1 1) Power of Attorney of the legal representative, letter of introduction from the company and ID card of the agent;
Note: The above qualification materials must be provided with a copy stamped with the official seal of the tendering unit (except the power of attorney of the legal representative, the letter of introduction from the unit and the ID card of the manager), and those who fail the pre-qualification will not be registered;
Any bidding applicant who meets one of the following conditions, has the qualification of project manager above level 2 (including level 2), and has the professional contracting performance of operating room decoration and purification engineering, can register (the original is required):
(1) The qualification of contracting enterprise specialized in building decoration and mechanical and electrical equipment installation engineering is above Grade II (including Grade II);
(2) The qualification of contracting enterprises specialized in air purification engineering is above Grade II (including Grade II);
(3) The qualification of the contracting enterprise specialized in architectural decoration engineering is above Grade II (including Grade II), and the contracting scope of its enterprise qualification can undertake the purification project construction.
6. Registration requirements: enterprise administrative letter of introduction, enterprise business license, bidder's tax registration certificate, enterprise qualification certificate, valid project manager's certificate, safety production license, corresponding performance of construction contract, certificate of legal representative or its entrusted agent, and ID card must be original, and a set of copies must be prepared. (The copy must be stamped with the official seal of the bidder's unit).
2 Letter of introduction from the bidder
To: XXXXXXX Limited
I hereby authorize (ID number represents our company to handle _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _).
Applicant: _ _ _ _ _ _ _ _ _ _ _ _
XXXXXXXXXX co., ltd.
The third part of the bidding introduction registration conditions: 1, with independent legal personality; 2. At the same time, it has the qualification of two-level professional contracting of architectural decoration engineering and three-level professional contracting of mechanical and electrical equipment installation engineering issued by the provincial and above construction administrative departments; 3. The qualification grade of registered construction engineer is decoration level 2 or electromechanical installation level 2 or above.
Documents required for bidding registration: 1, letter of introduction from the enterprise and business license (copy); 2. Legal person certificate or legal person power of attorney, client's ID card and labor contract; 3 qualification certificate (copy); 4. Safety production license; 5, intends to participate in the project bidding certificate of registered architect and my safety assessment certificate; 6. Five-member certificate and safety assessment certificate of safety officer; 7. Achievements of similar projects (level II hospitals or above) that have been completed in the past 24 months (bid-winning notice, construction contract, construction drawing, proof materials for completion acceptance, but not including written proof materials, any two of the above materials). After checking all the original documents, leave a copy (stamped with the official seal of the unit).
Having the professional contracting qualification of building decoration engineering issued by the Provincial Department of Construction ≥ Grade II, or the professional contracting qualification of air purification engineering ≥ Grade III;
1, with the professional contracting qualification of mechanical and electrical equipment installation engineering issued by the Provincial Construction Department ≥ level 3;
2, with the provincial construction department issued a safety production license;
3. The qualification of the project manager to be stationed in this project is not lower than Grade II;
4, issued by the provincial quality and technical supervision department of pressure pipeline design certificate;
5. The certificate of installation, renovation and maintenance of special equipment issued by the provincial quality and technical supervision department can prove that the categories and grades of installation, renovation and maintenance are: gc, gc3 or above;
Note: If the bidder is not qualified for the design, installation and maintenance of10-1pressure pipeline, if the bidding involves the design and installation of pressure pipeline, an enterprise with such qualification shall be invited to design and install it. Provide the following qualification documents for pressure pipeline and installation and maintenance enterprises when bidding: ① a copy of the business license that passed the annual inspection of xx; ② Organization code certificate; ③ Pressure pipeline design certificate; ④ License for installation, renovation and maintenance of special equipment (pressure pipeline), and its scope of installation, renovation and maintenance is: gc gc3.
(1) Business license that has been inspected annually by xx; (2) tax registration certificate (3) enterprise organization code certificate; (4) The professional qualification certificate of building decoration engineering is at or above Grade II (or the professional contracting qualification of air purification engineering is at or above Grade III); (5) The professional contracting qualification certificate of mechanical and electrical equipment installation engineering is level 3 or higher; (6) enterprise safety production license; ; (8) Qualification certificate of project manager (level 2 or above); (9) Pressure pipeline design certificate; (10) License for installation, modification and maintenance of special equipment (pressure pipeline); (1 1) Power of Attorney of the legal representative, letter of introduction from the company and ID card of the agent;
Note: The above qualification materials must be provided with a copy stamped with the official seal of the tendering unit (except the power of attorney of the legal representative, the letter of introduction from the unit and the ID card of the manager), and those who fail the pre-qualification will not be registered;
Any bidding applicant who meets one of the following conditions, has the qualification of project manager above level 2 (including level 2), and has the professional contracting performance of operating room decoration and purification engineering, can register (the original is required):
(1) The qualification of contracting enterprise specialized in building decoration and mechanical and electrical equipment installation engineering is above Grade II (including Grade II);
(2) The qualification of contracting enterprises specialized in air purification engineering is above Grade II (including Grade II);
(3) The qualification of the contracting enterprise specialized in architectural decoration engineering is above Grade II (including Grade II), and the contracting scope of its enterprise qualification has the ability to undertake the construction of purification projects.
Registration requirements: enterprise administrative letter of introduction, enterprise business license, bidder's tax registration certificate, enterprise qualification certificate, valid project manager's certificate, safety production license, corresponding performance of construction contract, certificate of legal representative or its entrusted agent, ID card, all of which must be original, and a set of copies must be prepared. (The copy must be stamped with the official seal of the bidder's unit).
Letter of introduction of Bid 4 of Public * * * Resource Transaction Management Office in _ _ _ _ _ _ _ _:
Now, let me introduce my comrades-in-arms (gender: _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ This comrade is the contact person of our company to participate in online bidding in Yiling District. Any matters in the bidding process in the future shall be contacted by the contact person. The data submitted by our company after logging in with the key is the true meaning of our company, and our company is responsible for its authenticity and legality.
The mobile phone number of the contact person who receives the transaction information for free is (only one number): _ _ _ _ _. If the contact person, mobile phone number and registration information are changed, we will apply for the change in writing.
Hereby!
Name of unit (administrative official seal):
Date, year and month
5 _ _ _ _ _ _ _ (name of regional department) Letter of introduction from working comrades:
A real estate investment company in our city is introduced to bid for this project. _ _ _ _ _ Real Estate Investment Company is a key leading enterprise in our city. It was established in _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Be sure to contact and assist warmly.
Year, month and day (seal)
Xxx company limited
Introduction to Bidding Chapter VI Registration Conditions:
1, with independent legal personality;
2. At the same time, it has the qualification of two-level professional contracting of architectural decoration engineering and three-level professional contracting of mechanical and electrical equipment installation engineering issued by the provincial and above construction administrative departments;
3. The qualification grade of registered construction engineer is decoration level 2 or electromechanical installation level 2 or above.
Documents required for bid registration:
1. Letter of introduction and business license (copy);
2. Legal person certificate or legal person power of attorney, client's ID card and labor contract;
3 qualification certificate (copy);
4. Safety production license;
5, intends to participate in the project bidding certificate of registered architect and my safety assessment certificate;
6. Five-member certificate and safety assessment certificate of safety officer;
7. Performance of similar projects (level II hospitals or above) that have been completed in the past 24 months (letter of acceptance, construction contract, construction drawings, proof materials for completion acceptance, but not including written proof materials, any two of the above materials). After checking all the original documents, leave a copy (stamped with the official seal of the unit). Having the professional contracting qualification of building decoration engineering issued by the Provincial Department of Construction ≥ Grade II, or the professional contracting qualification of air purification engineering ≥ Grade III;
8, with the provincial construction department issued by the mechanical and electrical equipment installation engineering professional contracting qualification level 3 or above;
9. Have a safety production license issued by the Provincial Construction Department;
10, the qualification of the project manager to be stationed in this project is not lower than Grade II;
1 1, the pressure pipeline design certificate issued by the provincial quality and technical supervision department;
12. The certificate of installation, renovation and maintenance of special equipment issued by the provincial quality and technical supervision department can be certified, and its installation, renovation and maintenance categories and grades are: gc and gc3 or above;
Note: If the bidder is not qualified for the design, installation and maintenance of10-1medium pressure pipeline, if the bidding involves the design and installation of pressure pipeline, an enterprise with such qualification shall be invited to design and install it. When bidding, provide the following qualification documents for pressure pipelines and installation and maintenance enterprises:
(1) A copy of the business license for annual inspection of XX; ② Organization code certificate; ③ Pressure pipeline design certificate; ④ License for installation, renovation and maintenance of special equipment (pressure pipeline), and its scope of installation, renovation and maintenance is: gc gc3.
(1) Business license that has been inspected annually by XX;
(2) tax registration certificate
(3) Organization code certificate of the enterprise;
(4) The professional qualification certificate of building decoration engineering is at or above Grade II (or the professional contracting qualification of air purification engineering is at or above Grade III);
(5) The professional contracting qualification certificate of mechanical and electrical equipment installation engineering is level 3 or higher;
(6) enterprise safety production license;
(7) Qualification certificate of project manager (level 2 or above);
(8) Pressure pipeline design certificate;
(9) License for installation, modification and maintenance of special equipment (pressure pipeline);
(10) Power of Attorney of the legal representative, letter of introduction from the company and ID card of the agent;
Note: The above qualification materials must be provided with a copy stamped with the official seal of the tendering unit (except the power of attorney of the legal representative, the letter of introduction from the unit and the ID card of the manager), and those who fail the pre-qualification will not be registered;
Any bidding applicant who meets one of the following conditions, has the qualification of project manager above level 2 (including level 2), and has the professional contracting performance of operating room decoration and purification engineering, can register (the original is required):
(1) The qualification of contracting enterprise specialized in building decoration and mechanical and electrical equipment installation engineering is above Grade II (including Grade II);
(2) The qualification of contracting enterprises specialized in air purification engineering is above Grade II (including Grade II);
(3) The qualification of the contracting enterprise specialized in architectural decoration engineering is above Grade II (including Grade II), and the contracting scope of its enterprise qualification can undertake the purification project construction.
Registration requirements:
Enterprise administrative letter of introduction, enterprise business license, bidder's tax registration certificate, enterprise qualification certificate and valid project manager certificate, safety production license, corresponding performance of construction contract, certificate of legal representative or its entrusted agent and ID card, all of the above documents must be original, and a set of copies must be prepared. (The copy must be stamped with the official seal of the bidder's unit).
;