1.CE certification (ConformiteEuropeenne)
This logo must be very familiar to everyone! Yes, it is CE certification, the use of CE certification of products more and more widely, a product if there is a CE mark, then, on behalf of this product safety, health, environmental protection and consumer protection and a series of European directives to express the requirements. If the product can meet the relevant requirements, you can post the CE mark, but does not meet the relevant requirements, on the contrary. (Personally, I think CE is not a certification, just self-affirmation, general shipments to Europe will do this statement)
2. CCC product certification (Chinacompulsorycertification)
CC certification: the so-called 3C certification, this certification was born on May 1, 2002, CCC is English! Chinacompulsorycertification abbreviation, meaning "China Compulsory Certification". If the product is included in the General Administration of Quality Supervision, Inspection and Quarantine and the Certification and Accreditation Administration of the State Council issued the "first batch of mandatory product certification product catalog," the implementation of mandatory testing and auditing of the product. If the product is included in the catalog, did not get the designated agency certification, not carried out in accordance with the provisions of the labeling certification, you can not sell, import and factory. After the implementation of this mark, it replaced the original "Great Wall" mark, "Great Wall" mark since May 1, 2003 on the abolition of the mark. It should be noted that the 3C mark is not a quality mark, but only a basic safety certification.
3. CQC certification
China Quality Certification Center (CQC), you can get the CQC certification, and then affixed with the CQC certification mark of the product, is certified by the national certification body, the purpose of the certification of safety, in line with the national response to the quality standards.
4. CB certification
CB system (electrical product qualification testing and certification of the IEC system) is the IECEE operation - an international system, the IECEE member states certification bodies based on the IEC standard for electrical product safety performance testing, the test results that the CB test reports and CB test certificates in the IECEE member states to be mutually recognized! The purpose of the system is to reduce the need to meet the safety performance of electrical products due to different standards. The purpose is to reduce barriers to international trade due to the need to meet the different national certification or approval criteria arising from the IECEE is the International Electrotechnical Commission Electrical Product Conformity Testing and Certification Organization of the abbreviation.
5. PCT Certification
"To enter the customs territory of the Russian Federation, all products must obtain the Certificate of Conformity to the National Standard (GOST Certificate of Conformity) issued by the State Committee of Russia for National Standards and Metrology," the Russian law states. So to enter the Russian market, you must get this certification Oh, but we are very different in China, we just have the Russian PCT standard certificate, can be, is equivalent to get a copy of the entry, entry and exit of Russia's national passport. (Note: things are not perfect, there are very few parts can not be, even with the certificate)
6. PSE certification
Japan's DENTORL law (Electrical Appliance and Material Control Law) provides that 498 kinds of products to enter the Japanese market must be certified by the safety of the. 165 kinds of class A products, of which 165 kinds of class A products, must be certified by the safety of the. Among them, 165 types of A products should obtain the diamond-shaped PSE mark, and 333 types of B products should obtain the round PSE mark.
7. ETL certification
ETL is the United States Electronic Testing Laboratories (ElectricalTestingLaboratories) abbreviation, ETL laboratory is by the American inventor Thomas Edison in 1896 single-handedly founded in the United States and the world enjoys a high reputation. Like UL and CSA, ETL can test and issue the ETL certification mark according to UL standards or American National Standards, and can also test and issue the composite certification mark according to UL standards or American National Standards and CSA standards or Canadian standards at the same time. The "us" on the lower right indicates that it applies to the United States, and the "c" on the lower left indicates that it applies to Canada, and both "us" and "c" are applicable in both countries. Any electrical, mechanical and electromechanical products can be tested by EMC to check the performance of the products. As long as the product is labeled with the CTL mark, it means that the product has been tested and passed the ETL test. Passing the ETL is to comply with the relevant industry standards.
8. EN certification
EN (European Standard): According to the participating countries to assume the *** with the obligation to adopt this EN standard will be given to a member state of the relevant national standards in order to legalize the status of the country, or revoke the opposite of a country's relevant standards. In other words, the national standards of the member states must be harmonized with the EN standards.
9. TUV Certification
TUVR-Heinland Rheinland Technical Supervision. This is Germany's largest certification body for product safety and quality. It is a government-recognized testing agency. TUV and FCC certification, CE certification, CSA certification and UL certification are the same level, are all part of the authority. If you want to go to the German market, you must pass the TUV certification. So in a variety of IT products and household appliances, you can see the TUV certification and the above five signs.
10.CSA certification (CanadianStandardsAssociation)
CanadianStandardsAssociation abbreviation for CSA, meaning Canadian Standards Association. It was founded in 1919, the North American market for electronic appliances and other to obtain CSA certification. CSA is the largest certification body in Canada and one of the most famous safety certification organizations in the world. Machinery, building materials, electrical appliances, computer equipment, office equipment, environmental protection, medical fire safety, sports, recreation and other aspects of all types, it can be tested and given to provide product safety certification.
11.GS certification
GS means German "GeprufteSicherheit" (safety has been certified), but also "GermanySafety" (German Safety) means. GS certification based on the German Product Safety Act (SGS) as the basis for testing in accordance with the European Union harmonized standards EN or the German Industrial Standard DIN. GS certification based on the German Product Safety Act (SGS) in accordance with the EU unified standard EN or the German Industrial Standard DIN for testing, a voluntary certification, is recognized in the European market, the German safety certification mark. With the GS certification mark means that there is a security, and through the credibility of the independent body of the test. It is different from CE, GS is not legally mandatory, but the safety awareness has been deep into the hearts of ordinary consumers, such as a sticker GS certification mark, and one without a sticker GS certification mark, that has a sticker GS certification of the product is certainly more competitive.
12. UL certification (UnderwriterLaboratoriesInc)
UL is the abbreviation of UnderwriterLaboratoriesInc, which means the British Underwriters Laboratories. It was born in 1894. The most authoritative testing laboratory in the United States is UL. It is also a private organization that conducts safety tests and evaluations around the world. It is different from other organizations. It is an independent, non-profit, public **** safety testing professional organization. It adopts scientific testing methods to study and determine a variety of materials, devices, products, equipment, buildings, etc. on life, property, the degree of harm; to determine, prepare, issue the corresponding standards and information conducive to reducing and preventing the loss of life and property, while carrying out factual research business. In short, it is mainly engaged in product safety certification and business safety certification business, its ultimate goal is to get for the market with a considerable level of safety of goods, to ensure the safety of personal health and property to contribute. Product safety certification as an effective means of eliminating technical barriers to international trade, UL to promote the development of international trade also plays a positive role.
13.FCC Certification
FCC Certification Introduction FCC (FederalCommunicationsCommission, the U.S. Federal Communications Commission) was established in 1934 by the COMMUNICATIONACT is an independent agency of the U.S. government, directly responsible to Congress. Many radio applications, communications products and digital products to enter the U.S. market, all require FCC approval. The U.S. Federal Communications Commission FCC, FCC developed a number of electronic equipment involved in electromagnetic compatibility and operator safety and a series of product quality and performance standards, FCC developed these standards have been used by many people, but also a number of the world's national technical regulatory authorities or similar organizations certified. Because of this, so many electronic products, no matter what the factory on the technical manuals are printed on the FCC issued by the certification of compliance with a standard or declaration of compliance with one of the standards of the FCC.
14.NF certification
NF is the code name of the French standard, which was introduced in 1938, and its governing body is the French Association for Standardization (AFNOR). The French Association for Standardization (AFNOR) was established in 1926 under the French Decree of 1901 as a public interest non-profit, national standardization body recognized and financed by the government. AFNOR is at the heart of the French standardization system. The NF Service Certification is a voluntary NF Mark certification that confirms the quality and reliability of a service that meets the quality performance required by French, European and international standards for removals, furniture storage units, travel agencies, emergency repairs and towing, passenger transport, personal safety, and lifelong education. France is better known for its standards for services in the tourism industry, including hospitality, hotels, transportation and satisfaction surveys.