(total length of 2 meters including the length of the elevator) Configuration details:
1. power part: 180W1:60 Chuan Ming speed motor, with electronic Speed controller, chain cover and motor plate are made of A3 iron plate folded into shape, surface powder coating treatment;
2. foot frame: made of HLX-23, 40*40*T1.5mm aluminum profile;
3. guide rail: made of aluminum profile HLX-91, 35*70*T2.0mm2.5 times the speed of the chain special track;
4. conveying part: Industrial special nylon 2.5 times speed 19.05 pitch chain (HLX), all chain plates are hardened, wheels rotate flexibly;
5. Air hose: made of 6-minute galvanized air hose, with a Y-type quick connector installed, and one at the bottom of the stand, which runs through the whole line;
6. Feet: made of M12*80mm galvanized foot cups, height adjustable ±30mm;
7. p>
The surface of the iron parts are powder coated, and the color is computer gray;
Two, jacking and positioning table
Configuration details:
1. jacking cylinder: adopting the star cylinder to rise and fall smoothly, the cylinder diameter is 63 and the stroke is 50mm;
2. jacking plate: adopting the aluminum plate of T10mm to make, and the surface is anodic treatment;
the fixing plate adopts the A3 iron plate folded into shape, and the surface is anodic treatment;
the fixed plate adopts the A3 iron plate folded into shape, and the surface is anodic treatment. A3 iron plate folded into shape, surface powder coating treatment;
Three, elevator
Configuration details:
1. support: HLX-23, 40 * 40 * T1.5mm aluminum profile production;
2. Elevator cylinders: the use of the Star Cylinder to rise and fall smoothly, the cylinder diameter of 63mm;
3. Into the plate drive motor: Adopt (Chuanming) 60W1:30 fixed-speed motor;
4. Transmission belt: adopt T5mm green PVC anti-slip belt with 8*13 guide strip;
Connecting iron plate: adopt T3-T6mm A3 plate folding production, surface powder spraying production;
Four, HLX-QX-II vertical blocker
Configuration details: blocker HLX-QX-II vertical blocker is used for cylinder, the fixed plate is made of 3mm thick iron plate bending and molding, powder spraying treatment, with P8 blue air pipe, solenoid valve (Star brand) and air nozzle;
Fifth, the design description
1.The method of selecting the doubling chain
The hardness of the chain plate, the rotating flexibility of chain wheels, and the friction-resistant degree of the chain
2. "Calculation of torque of chain and sprocket chain"
Torque = TM x TG. TG=TMxixn
TG:j chain torque (500kg/cm)
TM:motor torque (3000kg/cm)
i:sprocket speed reduction ratio 1:50
n:speed reducer efficiency
3. Design Parameters:
The torque of the chain is increased due to the large speed reducer ratio. The torque of the chain is increased by the ratio of the speed reducer, but it is limited by the material of the gears and other conditions, which limit the actual load torque, and the maximum allowable torque of the speed reducer depends on the type of the speed reducer.