Precautions for the use of infusion pumps:
1, in the process of use, you must use your fingers to operate the membrane buttons, avoid the use of nails or sharp objects.
2, the use of the same infusion infusion, 1-25ml / h continuous use of 8-10 hours, should be replaced with an infusion device clamp tube position; greater than 25ml / h, continuous use of 4-6 hours, should be replaced with an infusion device clamp tube position. The double-layer thickness of the infuser tube wall is between 0.8-1.2mm, and the diameter of the tube should be between 3.5-4.5mm, otherwise the precision of infusion will not be guaranteed and may cause serious injury to the patient.
3. When changing to a new brand of infusion set, its accuracy must be calibrated first, otherwise the accuracy of infusion will not be guaranteed and may cause serious injury to the patient.
4, the battery is a consumable part, charging can no longer be used, it must be replaced, otherwise the built-in battery can not be guaranteed to work properly.
5, drip sensor clamp Murphy's pot position, must be higher than the horizontal plane, and into the 90 ° angle of vertical hanging.
6, the alarm sound has a large, medium and small, the default setting is "medium tone".
Meriwether Medical Technology Co., Ltd Infusion Pump
Infusion pump use disinfection and maintenance:
Scheduled arrangements should be made for health care workers or maintenance engineers to clean the surface of the equipment, the available cleaning agents: warm water, ethanol (75%), isopropyl alcohol (70%).
Use warm water to dampen a soft cloth to wipe the surface of the infusion pump, and then wipe with a cotton ball dipped in ethanol (75%) to disinfect, and then placed in a ventilated and cool environment to air dry.