Green Leopard Resin Adhesive: It has the characteristics of high adhesion, no hardening, high waterproof, no yellowing and anti-aging.
Nanguang resin adhesive uses:
(a), clean:
1, dust removal-dust is one of the factors affecting adhesion;
2, to prevent moisture-moisture is another key to affect adhesion;
3, oil pollution-grease is the third key to affect adhesion;
(2) Polishing (surface treatment):
1, polish any leather and soles to be bonded with sandpaper of about 120 mesh;
2. Grind the dermis evenly and grind it as deep as possible;
3. Grind the soles as much as possible until all glossy surface disappears;
(3) Glue (brush):
1, the soles and leather should be glued on both sides;
2. Brush the glue as evenly as possible;
3. Open the leather and soles coated with Nanguang resin glue on both sides to dry naturally 1-3 minutes;
(4) heating (drying):
1, blow dry for 20 seconds with a hair dryer;
2. The optimum drying temperature is 60-80 degrees Celsius above zero (control the distance of the blower);
(5) Fixing (pressurizing):
1, combine the rubber cover and the sole, and press it in place as much as possible, especially the edge of the shoe;
2. It is best to press with a hammer or roll with wheels, or press hard with your bare hands;
3. The shoes are filled with discarded newspapers and periodicals, and the brushing part is wrapped with tape paper, and the brushing part needs to be closely bonded;
4, after a fixed time of 24 hours, unpacking;