Jutali's "air-adjustable visual cleaning set" products have spread all over the country, bringing health to everyone. With advanced technology and brand-new service, Jute air conditioning maintenance project set off an air conditioning cleaning upsurge.
Complete the maintenance and disassembly of various vehicle air conditioning systems.
Audi
There are many Audi models, different models and different evaporation boxes. It is more common to remove the fan in the old model, and the filter element can be removed in the new model.
Other models, such as Audi A4L A6L A8L Q7, are more common to remove the built-in air filter and clean it as shown below.
Turn the three screws of the frame trim panel.
Open the empty filter cover.
When the filter element is empty, the evaporator can be cleaned from the inlet.
The old Audi A4 A8 has removed the blower A8, and the blower A8 is external as shown below.
Remove the front windshield.
Open and remove internal and external loop triggers.
Remove the baffle to see the blower, and remove the evaporation box cleaned from the blower inlet.
Peugeot Citroen
Peugeot Citroen cars in France often see the filter element in the co-pilot air removed or the resistance of the main driving blower cleaned.
Find the blower resistance under the driver's feet.
Determine the blower resistance position
Remove the resistor and insert it into the resistor inlet for cleaning.
After the co-pilot or driver removes the Citroen air filter, clean the evaporator from the air filter inlet.
Loosen the two screws of the front passenger side trim panel with tool T20.
An empty filter inlet was found.
Take out the empty filter element and clean it from the inlet.
Porsche
Porsche Cayenne has a built-in empty filter element, which can be removed when cleaning the evaporation box.
Remove the glove box lower trim panel and lower slide plate.
Find the empty filter element and take it out.
Clean the evaporation box from the empty filter inlet.
German BMW Automobile Factory (Bavarian Automobile Factory)
The new BMW 5 Series, 3 Series and 7 Series have two air conditioning filters. When cleaning the evaporation box, remove the filter element for cleaning.
Remove the front passenger side trim panel.
Remove the four screws of the empty filter housing.
Remove the empty filter element and clean the evaporator.
For the old BMW 3 Series 5 Series air adjustable filter element, it is necessary to remove the blower in the engine compartment to clean the evaporation box.
Open the co-pilot glove box and remove the screws.
See blower after removing glove box.
After removing the three screws of the blower, you can clean the evaporation box.
Run away
Most of the new Mercedes-Benz models have removed air filters, such as E-series, C-series and S-series GL. After taking out the empty filter element, you can clean the evaporation box.
Remove the three screws of the front passenger trim panel.
Look at the lower cover of the air conditioning filter element, cut and unscrew two screws.
Take out the empty filter element and enter the cleaning evaporation box from the inlet of the empty filter element.
Honda
Honda's air filter elements are almost all built-in, and the evaporator can be cleaned by removing the blower.
Remove the co-pilot glove box.
Unscrew the three screws of the blower under the glove box.
After removing the blower, clean the evaporation box from the blower inlet.
Buick
It is adjusted by Honda air filter, and the built-in disassembly fan can clean the evaporation box.
Remove the co-pilot glove box.
Remove the blower.
After removing the blower, clean the evaporation box from the blower inlet.
Chang'an
Most of the air filter adjustment of Changan Automobile is built-in cleaning evaporation box, so the blower should be removed.
Remove trim panel and glove box.
Remove the three screws of the blower.
Clean the evaporation box from the blower inlet.
Volkswagen Skoda
Volkswagen sagitar magotan tiguan and other filter elements are the same. The cleaning method of empty evaporation box is the same. Remove the filter element for cleaning.
Remove the two knob screws of the trim panel.
Take off the slide cover.
Take out the empty filter element and clean the evaporation box from the inlet of the filter element.
common people
Volkswagen's old Passat Bora etc. Whether the co-pilot blower has been removed from all newly cleaned evaporation boxes.
Remove the lower co-pilot glove box.
Remove the three screws of the blower and take out the blower.
After removing the blower, clean the evaporation box from the blower inlet.
Volkswagen LaVida, LaVida, New Bora, etc. Remove the blower resistor and clean the evaporation box.
Remove the two clips of the lower trim panel.
After seeing the resistor, remove the two fixing screws and remove the resistor.
After removing the resistor, check the evaporation box and clean it.
avoid
Dodge mostly uses built-in air filter to clean evaporation box in the United States, and the blower needs to be disassembled.
And take out the storage box.
Remove blower and filter element.
Clean the evaporation box from the blower inlet.
Toyota
All Toyota cars are cleaned with built-in air filters. Remove the blower and clean the evaporation box.
Remove the front passenger side trim panel.
Remove the glove box and take out the empty filter element.
Remove the three screws of the blower and clean the evaporation box from the blower inlet.
Ford
The classic Ford Focus Mondeo winning air filter main driver is detachable and the evaporation box can be cleaned.
On the main accelerator pedal, there is a cover with an empty filter element.
Remove four 7mm screws from the outer cover.
Take out the empty filter element and clean the evaporation box from the inlet of the filter element.
When cleaning the evaporation box in the glove box, you need to remove the new Ford Mondeo air filter.
Remove the co-pilot glove box.
Remove the empty filter element and find the blower.
Remove the blower and clean the evaporation box from the inlet.
Japanese hippocampus
Hainan Mazda 323 Familia Haifuxing and other built-in air filter elements should be removed from the blower resistor to clean the evaporation box.
Remove the co-pilot glove box.
Remove the glove box and check the blower resistance.
Remove the resistor and clean the evaporation box from the resistor inlet.
jeep
Beijing Jeep Freelight built-in air filter, remove the air filter and clean the evaporation box.
Remove the baffle next to the first officer's left foot.
Remove the empty filter element.
Take out the empty filter element and clean the evaporation box from the inlet of the filter element.
Cadillac
American Cadillac ATSSRXTS Escalade built-in air filter. Remove the blower to clean the evaporation box.
Remove the two clips of the lower trim panel and then remove the trim panel.
Remove the blower, unscrew three screws and take out the blower.
Clean the evaporation box from the blower outlet.
Rand Lu Hua
Range Rover Discovery 4 Remove the blower resistor and clean the evaporation box.
Lexus
All Lexus cars of Toyota in Japan were taken down to clean the evaporation box.
Remove the co-pilot glove box.
Take out the empty filter element.
Remove the baffle, remove the three screws of the blower and clean the evaporation box from the inlet.
Suzuki method
Suzuki Swift SX4, etc. Built-in air filter element, remove the fan and clean the evaporation box.
Remove the co-pilot glove box and take out the empty filter element.
Find the blower.
Unscrew the three screws under the blower and clean the evaporation box from the blower inlet.
Morris garage
SAIC MG MG3 MG5 MG6 air cleaner element is outside the engine compartment. During operation, the blower should be removed to clean the evaporation box.
Remove the engine compartment air cleaner element.
Remove the blower under the glove box.
Clean the evaporation box from the fan inlet.
Mazda automobile
Mazda 6CX-4 CX-5 Artz has a built-in air filter. During operation, the blower should be removed to clean the evaporation box.
Remove the co-pilot glove box and take out the empty filter element.
Remove the blower under the glove box and take it out.
After removing the blower, clean the evaporation box from the blower inlet. Pay attention to the direction when the strokes are long.
Aubert
When cleaning, the built-in air filter element of Opel Vedas Anthra should be removed from the blower.
Remove the co-pilot glove box.
Remove the lower blower buckle and take out the blower.
Clean the evaporation box from the blower inlet.
Be killed
Most of KIA's air filter elements have built-in cleaning evaporation boxes, so it is necessary to remove the blower resistor.
Remove the glove box and find the blower resistance.
Unscrew the two screws above the resistor with a Phillips screwdriver.
Take out the resistor and clean the evaporation box from the resistor inlet.
Million car purchase subsidy