How to install curtain rod
Installing curtains is a professional job, but it is not too difficult. Before installing curtains, you need to prepare corresponding tools, such as tape measure, pencil, hammer drill, 6mm diameter drill, screwdriver, 6mm diameter plastic expansion tube, ladder, saw, etc. In addition, we also need to check whether the materials are complete, such as checking whether the Roman curtain rod and its decorative head, installation code and ring (ring) are matched; Measure the length of the roman blinds bar and the width of the window, and record.
How to install curtain rod II
Installing curtains is a very meticulous work, and everyone should install them in strict accordance with the steps. First of all, draw a line and draw the position line of each hole where the code positioning line is installed with a pencil. Generally, when the length of Roman curtain rod exceeds 2.5m, there are three installation codes, the installation code in the middle is located in the center of the window or wall, the installation codes at both ends should be at least 5-250px away from the window edge, and the rod should be 15-500px away from the window top (the specific location of the installation code depends on the size of the window and wall, and the above marking method is for reference only).
How to install curtain rod III
After everyone has drawn the positioning line, the next step is to punch holes. Don't be so casual when you punch holes, you must follow the specifications and keep in mind the following points: 1, the punching position is far away from wires and water pipes; 2. The drilling depth is 3.5- 125px, and it is not allowed to slip and skew when drilling; 3. After punching, press the plastic expansion tube into the hole.
How to Install Curtain Rod IV
After punching holes, the next step is to install curtain rods. The installation code should be fixed with long screws, and the rings should be inserted into the curtain rod one by one, and the rings should be split in two, leaving 1 rings at both ends; Then press the Roman curtain rod into the hole installation code and adjust it so that the decorative heads at both ends are at the same distance from the wall.
How to install curtain rod V
After the above steps are completed, you can hang beautiful curtains. Everyone hangs the hook on the curtain, and then hangs the other end of the hook into the hole of the lifting ring. Next, you can try to pull the curtains left and right to check whether the sliding is flexible and whether the heights of the two curtains are equal. Otherwise, fine-tune.