First, the solid wood bed: natural, environmentally friendly and healthy; Compared with those wooden furniture, the amount of glue used in the processing of solid wood beds is quite small. The amount of glue affects the environmental protection of furniture; Long service life, the service life of panel furniture is generally 3-5 years. The service life of solid wood bed is more than 5 times that of panel furniture; The main disadvantages of solid wood bed are easy deformation and difficult maintenance. For example, you can't let the sun shine directly, you can't be too cold and overheated, and the environment that is too dry and humid is not suitable for solid wood beds; If you don't pay attention when using, frequent switching of air conditioners will lead to excessive changes in temperature and humidity, and even qualified solid wood bedding will sometimes deform and crack.
Solid wood bed procurement:
1. Judge whether the solid wood bed is really solid wood. Scaring: Look at the position of the scarred side, and then look for the corresponding pattern on the other side. Wood grain: it looks like a pattern on the outside, so look at the pattern on the back corresponding to the position where this pattern changes. If it corresponds well, it is pure solid wood. Section: the section is darker than the panel, so it can be seen that it is made of a whole piece of wood.
2. Look at the tree species: What tree species is solid wood made of, which directly affects the price and quality. From the cheapest pine oak to the most expensive mahogany, the price difference is dozens of times. So, don't ignore tree species just because it is solid wood. After all, solid wood like pine is much worse than wood-based panels except environmental protection.
3. Determine the origin of the solid wood bed manufacturer: Pay special attention to the origin of the solid wood bed wood manufacturer. There is an old saying that "solid wood can't cross the Yangtze River", that is to say, after the solid wood bed produced in the south reaches the north, the moisture content will be affected by the climate and it is easy to crack and deform. So when shopping, you should see the place of origin clearly.
4. Observe whether there are any defects in wood: several major defects of solid wood: cracking, scarring, bug eyes and mildew. When buying, you should check all the details carefully.
5. Look at the connection of all parts of the solid wood bed: a good solid wood bed is connected by tongue and groove, and where the local load is large, it is reinforced by screws and protective blocks.
6. Look at the paint quality on the surface of the solid wood bed: what solid wood furniture fears most is water and fire. Needless to say, there is an old saying: dry for a thousand years, wet for a thousand years, dry for a thousand years, wet for a thousand years. It's about the problem that solid wood is afraid of water. The surface of the solid wood bed is the most effective way to prevent moisture from invading the solid wood bed. So check carefully whether the solid wood bed has not been painted.
2. Leather art bed: Compared with ordinary solid wood bed and plate bed, the price of leather art bed is relatively high. The headboard and bedstead of the leather bed are all made of leather. Before buying a leather bed, you should know how to distinguish genuine leather from fake leather, good leather from inferior leather. The biggest fear of a leather bed is getting oil or scratching. Do not use water directly when cleaning. You can gently wipe it with a dry cloth dipped in a special leather cleaner.
Leather bed selection:
1. Be sure to smell it before buying a bed. All leather beds smell a little more or less. If there is no smell, it must not be genuine leather. It smells light and not pungent. It will fade naturally in a week or so, so don't worry.
2. Judge the quality of the leather bed by observing the color of the leather bed. High-grade leather bed brands all adopt imported medium-thick leather or colored leather, with high color purity and no odor. The color of the leather bed made of inferior cowhide is mottled, which can be distinguished by feeling. A good leather bed has rich and shiny leather surface, no scar, delicate texture and lines, and is flexible and powerful to pinch by hand. One more thing, the size of the first layer of leather is limited. If a leather bed merchant claims that it is all genuine leather and there are no seams on both sides of the bed, it can basically be concluded that the merchant is lying.
You also need to know a little common sense before buying a crib. Know how to distinguish genuine leather from fake leather, good leather and inferior leather. Most of the leather beds we usually see are made of cowhide, which has high toughness and good durability. Generally speaking, leather can be divided into domestic and imported cowhide, the first layer of leather and the second layer of leather.
Third, the cloth bed: colorful cloth beds are made of all kinds of beautiful cotton and linen flannel fabrics, which look very warm, and fashionable colors and changeable shapes can match various styles. The cloth bed is breathable, more natural, gentle, comfortable and detachable. But many cloth beds are chemical fiber products, which are easy to breed mites. If it is not replaced frequently, it is easy to bring germs. If they are not diligent, the whole bed will look dirty and affect the beauty of the room.
Cloth bed selection:
1. Touch cloth: flax and flannel are generally available in the market, and the one with high knitting density is better.
2. Smell: Smell the fabric and bedstead of the cloth bed carefully. A well-made bed will not smell. Don't buy it if it smells pungent.
3. Look at the number of rows of skeletons: the general cloth bed has only two rows of skeletons, and the good one generally has three rows. Poplar skeleton has good toughness and is not easy to deform.
4. Check the interface: carefully observe the working condition of the interface to see if there is any disconnection or damage.
5. Watch the side of the bed: You can pat the side of the bed hard. If the sound is deep and heavy, the bed side is usually stronger.
4. Board bed: the basic material is man-made board, and the furniture is connected with hardware, which is convenient for disassembly, transportation and installation. General style is simple, no deformation, no cracking, moderate price, a large number on the market. However, due to the common hardware connection, the plate bed is most prone to loose connection, which leads to loose bed body and noise, and it is still lacking in environmental protection. For example, some manufacturers use particleboard and other materials to produce, if the veneer is not completely covered, it is easy to release formaldehyde harmful to human body. However, formal, especially brand-name panel furniture, has undergone strict processing and inspection.
1. Plate quality and environmental protection. Because the wooden bed is synthetic wood, it mainly includes three types: high-density board, medium-density board (MDF) and particleboard, among which the high-density board has the highest hardness, is not easy to crack, has the best moisture resistance and is expensive; Medium density fiberboard is next, particleboard is soft, moisture-proof and cheap. Environmental protection of materials is also one of the key links that cannot be ignored. At present, the environmental protection grade ranges from E0 to E5 * * *, which is divided into six grades, and decreases in turn. The international environmental protection mark is E 1, and the domestic environmental protection mark is E2. Generally speaking, as long as it meets the E2 standard, it is considered as an environmentally qualified product.
2. Pay attention to the paint film on the bed surface. Usually the bed is painted in a beautiful color. The quality of spray painting is an important standard to test the technological quality of lathe bed. The bed is mainly matt paint and high gloss paint. Matte paint is a bit abrasive and more wear-resistant; High gloss paint is smooth, not as abrasive as matt, but bright, making people feel comfortable and clean.
3. Pay attention to the skeleton arrangement. When shopping, you can try to pull the row of skeletons down by hand to feel their elasticity, or you can stand on the two rows of skeletons with your feet to measure the bearing capacity. In addition, it depends on the thickness and quantity of the skeleton. There are 26 row skeletons, and the ordinary ones are about 18 ~ 22.
4. Pay attention to the quality of cutting saws and metal parts. Pay attention to carefully check the quality of cutting saw, edge and surface decoration and board port. Metal parts should be smart and smooth, the surface should be well plated, and there should be no rust, burr, etc. , and the precision requirements of accessories are high.
Five, wrought iron bed: wrought iron bed is very classical, most of the wrought iron patterns are very beautiful; Compared with plate bed, the biggest advantage of high-quality wrought iron bed is that it can greatly reduce the pollution of indoor environment; When not in use, it is convenient to disassemble, does not occupy space and is easy to move. But wrought iron beds are not suitable for wet places. If the material of the bed is not enough, the wrought iron bed may make a certain noise and paint may fall off, which will affect the appearance.
Selection of wrought iron bed:
1. Style and color: wrought iron beds pay more attention to the expression of modeling, and the colors and lines are much richer than those of beds made of other materials, so the selection range is wider. Consumers can choose a style similar to the overall style of home decoration according to their own preferences; Due to the material, the color range of wrought iron beds is relatively small, generally black, bronze and bright. Consumers can choose wrought iron bed products that are in harmony with the color of the room according to their own preferences.
2. Materials and processing technology: The basic materials of wrought iron lathe bed are divided into casting and forging. The casting material is bulky and fragile, but its hardness is strong. Forging materials have good flexibility, moderate strength and more shiny appearance. I suggest you buy a wrought iron bed made of forging materials. In addition, the wall thickness of forging material is the key. The thicker the wall, the better the quality. There are generally two kinds of paint treatment for wrought iron beds: baking paint and painting. Consumers are advised to buy environmentally-friendly and healthy baking beds as much as possible.
3. Installation: The bed consists of head, tail and bed board. The head and tail connectors and fasteners are the key to the quality of the wrought iron bed. Consumers should shake the installed sample bed when buying wrought iron beds. Strong and fixed beds are of high quality.
6. Inflatable bed: small floor space and easy to carry; Comfortable, can realize the close combination of bed and human body, and is conducive to eliminating fatigue as soon as possible; It has a wide range of applications, which can be used for going out to work, often moving, camping in the wild, swimming or temporarily taking a break from work. But the air permeability of the aerated bed is poor, and the air permeability of the aerated bed is poor. The air bed is made of pvc material, which has poor air permeability. Therefore, if there is no object that can be buffered, sleeping on an inflatable bed will not be worth the loss, and it may be easy to get rheumatism. For children who are still in the stage of physical growth and development, the use of inflatable beds will cause dysplasia or bone growth. It is easy to be affected by high temperature, and the aerated bed is easy to be flattened or softened by high temperature. Generally speaking, inflatable beds are suitable for young people to sleep for a short time, and children and the elderly should not sleep.
Aerated bed selection:
1. See if the depth of concave joints on both sides of the aeration bed is obvious.
2. The thickness of the aerated bed should be even and flat, and it is not easy to turn vertically, and it should be upright.
3. Try to sleep face to face. A good air cushion lining material will not move or be uneven. Lying flat on the air mattress, feel the support and lifting of all parts of the body, especially the back and waist; Then lie on your side and feel the support and support of your back and waist. Finally, put your body in the posture of sleeping at ordinary times and turn around a few times to feel the comfort and support brought by the mattress.
4. Size of air mattress: When purchasing air mattress, the best size is to add 20cm to the personal height, so as to leave room for the head, hands and feet to stretch.
Rattan bed: Rattan bed is gradually favored by consumers because of its simple, refreshing, strong and light, not afraid of extrusion, supple and elastic characteristics. Rattan can give people a faint wood texture, which easily reminds us of the existence and beauty of nature. However, rattan beds should not be soaked in water for a long time or baked at high temperature. Keep away from sharp tools when using. When moving furniture, the bottom should be moved and the furniture should be kept horizontal. Otherwise, it is easy to deform. Don't jump on rattan furniture. Affected by seasonal changes, the service life is short. If used for a long time, a small amount of rattan may come loose.
1. Find the source of rattan. The materials used for rattan furniture are very particular. Most rattan materials come from Indonesia, Malaysia and other Southeast Asian countries. These rattan materials are hard and uniform in thickness from beginning to end. Domestic rattan mainly comes from Yunnan.
2. Observe the material of rattan. The quality of rattan furniture is determined by the quality of materials. High-quality old vines have hard texture, strong flexibility, consistent appearance, uniform color and no black spots, fullness and no cracking, good load-bearing, elasticity and no branching. If there are wrinkles on the surface of rattan, it may be made of tender new rattan, which has poor toughness and low strength and is easy to break and corrode.
3. Surface color, see if there are spots and moth-eaten marks on the surface. If there are many spots and traces of insects, be careful when choosing.
4. Check the stability of the framework. Grasp the edge of the rattan bed with both hands and shake it gently to feel whether the frame is stable. Wipe the furniture surface with your palm, it needs to be smooth.