As a key component of trailer braking system, the failure of trailer disc brake pad may pose a potential threat to driving safety. In this article, we will reveal some common faults and share solutions to help you better eliminate the problems.
1. The brake pads are badly worn:
Common symptoms: weakened braking force, prolonged braking distance, abnormal sound, etc.
Solution: Replace the seriously worn brake pads in time. Select the appropriate brake pad model and ensure that it is installed correctly. Check the wear of brake pads regularly and replace them according to the manufacturer's suggestion.
2. Overheating of brake pads:
Common symptoms: there is obvious burning smell when braking, and the braking performance decreases.
Solution: Check whether the brake pads and brake discs are stuck or too tight. Ensure that the brake system is well ventilated to prevent the brake pads from overheating. If the brake pads are overheated seriously, it is recommended to park the vehicle in a safe zone, wait for the brake system to cool before driving, and check whether there are other faults in the brake system.
3. Abnormal noise of brake pads:
Common symptoms: harsh creaking sound or sharp rubbing sound when braking.
Solution: Abnormal noise of brake pad may be caused by poor contact between the surface of brake pad and brake disc. First, check the brake pads for foreign matter or dust accumulation. Clean the surfaces of brake pads and brake discs and ensure that they are installed correctly. If the problem still exists, it is recommended to consult professional technicians for further inspection and maintenance.
4. The brake pad and brake disc are unbalanced:
Common symptoms: vibration or shaking when braking.
Solution: Check whether the brake pads and brake discs are flat. If there is imbalance, it may be caused by uneven wear on the surface of the brake disc or improper installation of the brake pads. Regularly check the flatness of brake pads and brake discs, and make necessary adjustment and replacement.
5. Brake fluid leakage:
Common symptoms: reduced brake fluid, weakened braking force and soft brake pedal.
Solution: Brake fluid leakage may be caused by damaged seal or loose joint. If brake fluid leakage is found, it is recommended to stop immediately for inspection. Repair the leaking seal or tighten the joint, and replenish enough brake fluid.
The above are just some examples and solutions of common faults of trailer disc brake pads. However, when dealing with any brake system failure, it is recommended to seek the help and advice of professional and technical personnel. They have professional knowledge and experience, and can accurately diagnose faults and take appropriate maintenance measures.
To sum up, regular inspection of brake pad wear, keeping the brake system clean, correctly installing and replacing brake pads, and seeking the help of professional technicians are all important steps to ensure the normal operation and driving safety of trailer brake system. Let's pay attention to the health of trailer braking system and escort for safe driving!