Daily maintenance rules and regulations need attention and care, and their main purpose is to make cars healthy and safe. For the maintenance of audio, the purpose is naturally to prolong the life of audio and ensure the sound quality. The maintenance of the stereo doesn't have to be disassembled, because non-professionals may not be able to do it well in this step. As one of many electrical appliances, audio also has the characteristics of many electrical appliances. As we all know, electrical products have three fears: one is afraid of humidity, the other is afraid of dust, and the third is afraid of violent vibration. So is the stereo. As long as people can figure out what they don't like, it's easy to protect them.
First of all, the stereo is afraid of humidity. Close the door when you wash your car. When washing the car, try not to have too much water on the towel, don't spray water with a watering can, and don't spray liquid such as detergent on the stereo. If there is dust on the stereo, you can wipe it with a wrung towel. Moreover, after cleaning the cab, it is best to open the window for a period of time to allow most of the water in the car to evaporate before closing the window. You know, the biggest killer of controllers for various components of electronic products is humidity.
Secondly, the stereo is afraid of dust. When listening to cd, it is difficult to advance and retreat, and even when reading CD, the radio effect is disturbed, which may be caused by dust intrusion. The damage of dust to car stereo is common but inevitable. When your car is driving on a dirt road, try not to open the window to avoid a lot of dust pouring into the car from the outside. It is best to adjust the external circulation of the air conditioner to the internal circulation.
Finally, the stereo is afraid of violent vibration. Although in the general driving process, the shaking of the car will not cause the violent vibration of the audio host (unless there is an accident), sometimes for some reason, people need to remove the audio, so pay attention to it at this time, and don't shake or knock the audio hard. Because after severe vibration, some parts inside the audio may be loose or damaged, causing serious failures. Generally speaking, even the audio host waiting for maintenance should be put down gently.