How to install water heaters in JD.COM?
First, open the package and determine the installation location, then prepare the required accessories and install the water heater.
1. First, open the package and take out the whole water heater. It is important to check whether there is something wrong with the water heater. If there is, go back. After inspection, you will find that there are two hooks behind the water heater to hang the water heater on the wall.
2. After seeing the hooks, measure the distance between them, then measure the length and width of the water heater, and then draw the position where you need to blink on the wall. This is very important, if you are not careful, the water heater will hang crooked or not.
After drawing, we can start drilling. Basically, some water heaters have expansion screws. If they don't, you need to buy it. It is better to buy a bigger one, which will be more solid. In addition, the expansion screw of the water heater was hooked. Don't buy it wrong.
4. Knock the expansion screw in with a hammer after drilling, and knock it in as a whole to make the expansion screw more firm. Then tighten the expansion screw with pliers or wrench so that his head is up, so that the water heater can be hung up.
5. Then lift the water heater. Cylindrical water heaters are relatively heavy. Basically, it is better for two people to carry it, which is convenient for hanging. Then just aim the hook behind the water heater at the expansion screw and hang it up, and the water heater will be fixed.
6. After the water heater is fixed, connect the water inlet and the water outlet. Here, buyers need to buy a 40-wide hose, then connect it from their own water outlet to the water inlet of the water heater, then connect the water outlet of the water heater to their own water inlet, and then plug it in for heating.
Precautions for water heater installation?
1. Water heaters are generally installed in bathrooms. Before installing the water heater, it is necessary to determine whether to choose hidden installation or semi-hidden installation or completely exposed installation. Hidden and semi-hidden installation has the advantages of invisible water heater, cleanliness and beauty, but it brings a lot of trouble to future maintenance and repair. The pros and cons of full exposure are just the opposite.
2. The water heater is installed on the power supply. From the safety point of view, it is necessary to independently pull a 4 square millimeter wire from the distribution box to the water heater socket. The socket should be 15A or above, and the socket position should be arranged on the side of the water heater wire position to avoid? Far apart? .
3. The inlet and outlet pipes of the buried wall of the water heater should be arranged near the inlet and outlet pipes of the water heater, and should correspond vertically, and the distance should not exceed 15CM.
That's what I introduced about how to install water heaters in JD.COM. Precautions for water heater installation? We know about the problems of water heaters, and it is more important to install them after buying them, because in life, we will find many faults caused by improper use of water heaters. The main reason is that some problems were not noticed during the installation, so everyone must be cautious.