Maintenance method of remote control electric fan for healthy household appliances

Only in summer is the period when electric fans are used every year. How to maintain it when not in use? Let's talk about it from two angles.

1. Open the rear cover of the motor, first wipe off the dust with a cloth, and then inject more than ten drops of sewing machine oil into the oil injection hole to wet and maintain the bearing; 2. Keep all switch buttons in the closed position to prevent the internal spring from failing due to elastic fatigue; 3. The electroplated net cover can be painted with some bicycle wax to keep it clean.

Any engine oil that falls on the plastic fan blades and the net cover must be wiped off to avoid long-term chemical reaction damage; 4. When using, turn to the maximum gear first, and then turn to the appropriate wind gear after the fan is fully started; 5. When you don't need to use it temporarily and put it away, you should take off the net cover and blades of the electric fan, first scrub the dirt with a soft and clean cloth dipped in soapy water, then rinse off the soapy liquid with clear water, and finally wipe it with a dry cloth and dry it.

Be careful not to hit the fan blades. If it is a plastic fan blade, it can't be scrubbed with hot water to keep the angle. Otherwise, the remote control electric fan will be stored in 1 as a whole.

That is, put the above treated parts together, wrap them in clean cloth and put them in a dry and ventilated place, which is not easy to collide.

2. Split storage.

That is, put all the parts into the original packaging box in sequence.

It is best to use the original plastic pad to level and stabilize the pad, protect the blades and components, and then put it in a dry place.

If it is a plastic electric fan, it should be stored away from heating and stoves to avoid damage to parts due to heat.