This bracelet battery needs to be sold before it can be replaced. 1 The bracelet needs to be removed. 2 The battery is not universal.
A bracelet holds a battery.
Open the chute behind the bracelet.
1. Take out the old battery with the bracelet tool.
2. Put the new battery in the bracelet.
3. Place the new battery with the bracelet tool.
4. Tighten the shell.
How to change the battery of children's bracelet?
Different brands of children's bracelets change batteries in different ways. Generally, you can read the instructions, or you can take apart the shell of the bracelet, look at the battery layout inside, find the battery, take it out and replace it with a new battery. Before replacing the battery, we must first prepare bong's battery replacement gadget. We had this gadget when we bought it, which is roughly as follows. Then we took the bracelet off our belt. We use this tool to shovel the big end and open it.
Then we can see the battery inside. The battery here is divided into positive electrode and negative electrode. Don't make mistakes when installing. If we turn the old battery upside down, it will fall out. Don't confuse it with a new battery.
After the old battery is taken out, we can install the new battery. When installing, the smaller area is facing the position of this chip, as shown in the figure. Don't put it wrong, or the bracelet may break.
Then, there is a gap on the side where the battery is installed, and a small piece of gold protrudes from the chip. Official website said it was a small hook. Align, click, click, and it's installed, then click everywhere to consolidate.
Note: Do not reverse the direction of the battery! ! !
How to Replace the Battery in Xiangshan Electronic weighing scale?
1. Put the back of the electronic scale on the ground, expose the battery box cover, and fasten the plastic baffle in the groove.
2. After exposing the battery inside, pay attention to a small iron buckle on the side of the battery and push it away in the opposite direction.
3. Without the pressing of the iron button, the battery falls off.
Take a new battery and put it back in the battery box. Be careful to press under the iron buckle.
5. Install the plastic baffle of the battery, and you can hear a slight bang.
6. Turn the electronic scale upward again, and the number on the display screen indicates that the battery has been replaced successfully.
How to change the battery of the bracelet watch on Taobao
How to change the battery of the bracelet watch on Taobao is as follows
Step 1: Clean the watch. Although the watch is small in size, its internal structure is very complicated and precise. A little dust or clothing fiber will affect the watch's running time. Therefore, before replacing the battery, the bottom cover of the watch should be cleaned like surgery, and the gap between the bottom cover and the bottom cover should be cleaned with a vacuum cleaner when opening the bottom cover.
Step 2: Open the watch bottom cover. Professional tools should be used, and special brands should use brand-specific tools. Avoid the deformation of the bottom cover to affect the tightness of the watch. The back cover of most watches is spiral. How to open the back cover of a watch can only be opened with a watch opener or a watch opener.
Step 3: Replace the original battery. Try to choose the original brand or origin battery. Wear finger covers when replacing batteries, to avoid the sweat on your fingers polluting and corroding the movement, which can never be removed.
Step 4: Check the waterproof fittings. Waterproof accessories of watches are generally made of rubber or plastic, and there will be an aging period. After aging, waterproof accessories will lose their waterproof performance. If the waterproof fittings are aging, they must be replaced, otherwise the watch will get water or get wet, which will make the movement oxidized and rusted, resulting in irreparable faults.