What are the plates of the wardrobe, 1, solid wood?
When it comes to wardrobe materials, solid wood is the best, which avoids the excessive use of adhesives, is healthier and more environmentally friendly, has strong bearing capacity, is safe and stable, and has a long service life, which can reach more than 500 times that of ordinary wooden wardrobes and is durable. However, the cost of solid wood wardrobes is relatively high, so most wardrobes on the market are made up of plates and plates.
2, large core board
Large core board, also known as joinery board, is a good material for making wardrobe frames. The large core board is plywood with solid wood core, the inner layer is the core made of strip logs, and then the upper material is pasted on the outside. Smooth and flat surface, strong stability, not easy to deform. Generally, it is divided into three layers, five layers and nine layers according to the thickness. The thicker the board, the higher the price, which can be selected according to the pressure and strength.
3, high density board
High-density board is a commonly used man-made board, which is made by soaking wood and branches in water and crushing them. Uniform density, high strength and easy processing. The disadvantage is that it is not suitable for damp places such as kitchen and bathroom, but it is not bad to make a wardrobe.
4, solid wood particle board
Solid wood particle board, as its name implies, is made by crushing solid wood into particles and then pressing them with glue. It retains some physical properties of solid wood, with good nail holding power and light texture, which will not cause too much pressure on the wardrobe, but its bearing capacity is not weak, and its cost is low and cost performance is high. So it is often used in wardrobe manufacturing.
What good joinery board (large core board) is used to customize the wardrobe? Moisture-proof effect is good, so it can't be applied directly. The center of the joinery board is the core material made of natural wood strips, and both sides are glued with veneer. As the name implies, large core board is one of the most important materials in decoration. Can be used as furniture, wooden doors, door covers, heating covers, curtain boxes, etc. Its waterproof and moisture-proof performance is better than particleboard and medium density fiberboard. Wood products such as furniture made of large core board have to go through two processes: gluing and painting, which is costly. The large core plate is divided into 3, 5 and 9 pieces according to its thickness. You can choose according to the pressure and intensity. The thicker the board, the higher the price.
Plywood: not easy to deform. It is a new type of solid wood material. Adopt high-quality imported large-diameter logs, deeply processed and staggered. Due to different processes, this kind of board has excellent environmental protection performance, which is 1/8 of the allowable formaldehyde content of large core board, and the price is around 200 yuan, which is slightly more expensive than high-grade large core board.
The nail holding power of MDF is worse than that of particleboard, which is the main material of cabinets after natural wood is crushed into particles and pressed into plates. The medium density board is made of powdered sawdust, which has good flatness but poor moisture resistance. In contrast, the nail holding power of MDF is worse than that of particleboard. If the screws are loose after tightening, the density board is rarely used as a cabinet because of its low strength and difficulty in fixing.
Moisture-proof board: the customized wardrobe adopts the processing technology of particleboard, but the adhesive is changed to green waterproof and environmentally friendly adhesive, which overcomes the shortcomings of particleboard and has good waterproof performance, but the cabinet body is a more commonly used material.
Melamine board: the full name is melamine impregnated adhesive paper veneer artificial board. Paper with different colors or textures is soaked in melamine resin glue, then dried to a certain curing degree, spread on the surface of particleboard, medium density fiberboard or hard fiberboard, and hot pressed.
Fireproof board: Fireproof board is a decorative board made of siliceous or calcareous materials as the main raw materials, mixed with a certain proportion of fiber materials, lightweight aggregate, adhesive and chemical additives, and autoclaved. This is a new material that is used more and more at present. Fire-proof board construction requires higher glue, and the price of fire-proof board with better quality is more expensive than decorative board. Generally, the thickness of fireproof board is 0.8mm, 1mm,1.2 mm. ..
The wardrobe purchase strategy 1 depends on the wardrobe material selection.
Professional manufacturers choose plates that meet the national testing standards, while non-professional manufacturers choose plates that have no testing report and pose a certain potential threat to human health. Therefore, buying a wardrobe depends on whether the merchant has the plate inspection report and relevant inspection certificate of the authoritative national inspection department.
2, look at the wardrobe plate veneer
Some wardrobes, on the surface, are not bad. You can scrape them off with a flick of your nails. The surface of these wardrobes are all low-priced poly paper on the market, which looks good and has poor wear resistance. Professional manufacturers generally use environmentally-friendly veneers, thick dipping paint, high temperature and high pressure treatment, high surface strength, wear resistance and scratch resistance.
3. Look at the edge sealing of wardrobe board
Professional manufacturers use precision cutting saws to cut plates, and there will be no edge collapse around the plates, because this effectively prevents moisture in the air from invading the plates. However, some manufacturers have no professional equipment, rough cutting and obvious edge collapse around them.
4. Look at the back panel structure of the wardrobe.
Professional manufacturers use a back plate with a thickness of more than 5mm, and adopt a slotted anti-skin overlapping structure to prevent the back plate from directly contacting the wall surface to absorb water from the wall surface. Some brands have thinner backboards, which are connected by nail-connected backboards. The back plate is in direct contact with the wall, and the moisture on the wall is easily absorbed by the plate, which makes the cabinet lose its sealing performance.
5, look at the wardrobe hardware accessories
Professional manufacturers use famous factory accessories to ensure quality. Accessories are often hidden and difficult for consumers to identify. Push and pull carefully. Accessories are important elements of wardrobes, bookcases and sliding doors, and are important indicators to ensure the comfort and durability of household products.
6. Look at the manufacturer's anti-counterfeiting logo and service.
Professional manufacturers have obvious manufacturers' anti-counterfeiting marks on the edge sealing of wardrobes, the profiles of cupboard doors, pulleys and even the veneer of plates, so the quality and maintenance are guaranteed, and consumers can use them with confidence.
7. Look at the collocation and systematization of furniture.
Professional panel furniture manufacturers can not only make wardrobes, cloakrooms and bookcases, but also provide system home supporting products such as shoe cabinets, wine cabinets, beds, dressing tables, bedside tables and rotating hangers.
How to choose wardrobe door 1, border and track?
The frame materials used for closet doors in the market are aluminum alloy, carbon steel, aluminum-titanium alloy and magnesium-titanium alloy, and the latter two materials are the most durable. The thickness of this frame is generally 1 mm, and it is difficult to guarantee the service life below this thickness. The quality of the track also directly affects the sliding effect. It is understood that at present, the guide rails of closet doors include cold-rolled steel guide rails and aluminum alloy guide rails.
2. Pulley
Whether closet doors can be used for a long time depends on the quality of pulleys. The closet door is generally more than 2.4 meters high, wide and heavy. If the bearing capacity of the bottom wheel is not enough, it will greatly affect the service life. At present, the materials of pulleys on the market generally include plastic pulleys and glass fiber pulleys. Plastic pulleys are hard in texture, but easy to break. If you use it for a long time, it will become astringent, the push-pull feeling will become worse, and the price will be cheaper. Glass fiber pulley has good toughness, wear resistance, smooth sliding and durability. When buying, consumers must recognize the material of the pulley.
3. Seal
In order to ensure that the two doors are closed alternately, all sliding door products will be spaced. Generally, the outer wheel needs the spacing of 15mm, which affects the sealing performance of sliding doors. Although tops are added to most products, there is still a big gap in the density and gap size of tops used in different products. Try to choose products with small spacing and top density. Of course, there is no evidence to prove the quality. On-site inspection is very important. A good wardrobe door will not be too light or too heavy when sliding, but it will have a certain weight, and it will not vibrate when sliding, and it will be smooth and textured.
4. Thickness of door panel
The thickness of the wooden board of closet doors is preferably 8mm- 12mm, which is more stable and durable to use, while the thickness of glass is generally 5 mm-10 mm. Too thick or too thin will lead to unsafe use.