2. Right-click and a dialog box will pop up, with options such as cut, copy and paste, among which copy is selected. As shown below.
3. Then go back to the computer desktop, left-click and double-click to open my computer/computer. (USB flash drive is connected to the computer)
4. After clicking, there will be disk C, disk D, disk E and so on. Click the inserted USB flash drive to remove the disk.
5. In the open page, right-click the blank space, click Paste, and then download it to the USB flash drive, which is very convenient.
Extended data
U disk is generally composed of flash particles, control chip and usb interface. Data is stored in flash memory particles. The control chip is responsible for interconnecting with the computer and exchanging data. The usb interface is a socket, and the usb interface has four copper pieces. Of course, usb3.0 has more than four copper pieces, but usb2.0 can already explain the problem. The left and right pieces are long and the middle piece is short.
In this way, when we pull out the USB flash drive, the left and right will cut off the connection with the computer first, and then they will be in the middle. The left and right two are suitable for power supply, and the middle one is responsible for data transmission. No matter how we operate, we must cut off the data transmission first, and then cut off the power supply. Through this design, we can reduce hardware damage and achieve hot plug.
However, hot plug only reduces hardware damage, but cannot reduce data damage or eliminate hardware damage. So unplug the USB flash drive after use, if it is not operated on the computer, there is also the risk of damage. For the safety of data and hardware, it is best to uninstall the hardware safely before unplugging the USB flash drive.