1. First, insert the receiver wire into the output hole on the receiver, which is the same as the microphone access hole.
2. After the microphone is connected to the computer, open the software that can sing K songs, and you can sing directly. For a desktop computer, the microphone plug is plugged into the microphone jack of the sound card of the desktop computer, either in front of the chassis or behind the chassis PP (most computer microphones are plugged in this way).
Step 1: Find the microphone jack (red) of the computer. Step 2: Connect a pair of two audio cables from the microphone jack of the computer to the audio output hole (output red and white jack) of the wireless microphone. Step 3: Connect the two-to-two audio cables of the computer earphone hole (green) to the input jack of the sound box.
4. Look for the wireless communication button on the keyboard. Press the FN key while pressing the wireless communication button. At this time, choose the wireless communication that needs to be turned on: Bluetooth. Open the desktop: My Bluetooth, select the matching device and enabled service.
5, wired microphone can be connected to the computer karaoke. For desktop computers, just plug the microphone into the microphone jack of the desktop sound card. However, the microphone of notebook computer can't be directly connected to the computer, and it needs an external USB independent sound card.
Insert the receiver cable into the output hole on the receiver, just as if the microphone were connected to the air. The other end is connected to the audio port of the amplifier microphone, and the audio port usually has comments. Please pay attention here. Plug the power cord into the wireless receiver. Plug in the other end.
Question 10: How to directly connect the microphone with audio and how to correctly connect the microphone with the computer (hint: the microphone should be plugged into the jack marked Mic on the sound card).
The wireless microphone is equipped with a receiver, which is installed in the stereo without connecting wires. Just turn on the stereo and turn on the microphone switch. Tools/Materials: Audio. Insert the wire of the receiver into the output hole of the receiver as if the microphone were connected to the air. Plug the power cord into the wireless receiver.
How to set up a computer microphone for stereo use?
1. First, insert the headphone cable, audio back panel, audio hole (green) and earphone front panel (green). 2, open the music player (QQ music, cool dog, cool me ...) and play music. Right-click realtek High Definition Audio Manager.
2. Open the control panel on win 10 system, click View mode, and select the small icon to view. After viewing it as a small icon, click Realtek HD Audio Manager. After entering the Realtek HD Audio Manager interface, click the folder at the top right.
3. See if there is a volume icon (small speaker) in the taskbar (lower right corner of the screen). If yes, skip directly to step 3.
4. Insert the computer power cord into the position shown below. Insert the round keyboard and mouse line into the position shown below. Insert the output line of the display screen into the position shown below. Plug the computer's network cable into the location shown below. Insert a mouse or keyboard with USB interface, as shown in the figure below.