How to adjust the heavy bass?

Question 1: How to tune the heavy bass? You must try to see if this is the sound you need.

First, you have to choose a few favorite songs with subwoofer audio output to listen to, and then start tuning EQ. Usually, the crossover point of the subwoofer in a professional audio factory is defined below 180HZ. Of course, some people set the crossover point below 250HZ ... In any case, the professional subwoofer can emit sound below 20Hz. Is there a special ultra-low speaker (or subwoofer) and frequency divider now? If not, it depends on how much HZ range bass can be emitted by the low-frequency unit of your existing stereo. If your family's EQ is 1/3 Octaveˇ30 or 3 1, the lowest bass can be tuned to the audio with an interval of about 20Hz 1/3, and your EQ has only seven segments, which can only be tuned from 63Hz of your EQ.

The steps are as follows: First, push all the putters of EQ to the middle zero to start playing, then slowly push them up from the 63hz putter to the position you think is enough, and then adjust them to 160HZ. These two frequencies can obviously make you feel that the bass has increased. As for how much to go up or how much to go down, it depends on your feeling and the ability of your equipment. If you feel the bass increase, the sound is a little stuffy. Consider whether to add a little 8k, 16k, but how much to add depends on your feeling. You don't have to turn EQ into a smiling number to be nice. Try it slowly. The fixed EQ method told by others may not be suitable for everyone.

Question 2: How to adjust the pitch of sound to listen to music? Bass, midrange and treble are all needed. You can't turn it down too small. Too much bass will drown out the high notes, make the sound turbid and make the music unpleasant.

If the volume is high, the bass can only be turned on 1/4 or 1/5, and the treble can be turned on 1/2, or all of them.

I listen to computer movie music, the bass is turned off, the treble is turned on, and the sound is better. There is too much bass in the movie program.

When listening to MP3, you can turn on a little bass and all high notes.

Only when you listen to the lowest volume (the sound that you can't hear next door) at night can you turn on all the bass, because when the volume is low, neither the bass nor the treble can be heard, so you need to turn it up a lot.

Music needs to be transparent and layered: the high notes should be clear and delicate, the midrange should be full and bright, and the bass should have a little rhythm.

There is another problem, that is, when 100%, the volume cannot be turned on completely, and the maximum volume can only be turned on within 2/3; Because the power amplifier is distorted, the volume is too loud, the distortion is serious and the sound is not good.

Question 3: How to tune the bass to listen to music? Bass, midrange and treble are all needed. You can't turn it down too small. Too much bass will drown out the high notes, make the sound turbid and make the music unpleasant.

If the volume is high, the bass can only be turned on 1/4 or 1/5, and the treble can be turned on 1/2, or all of them.

Listening to computer movie music, the bass is turned off, the treble is turned on, and the sound is better. There is too much bass in the movie program.

When listening to MP3, you can turn on a little bass and all high notes.

Only when you listen to the lowest volume (the sound that you can't hear next door) at night can you turn on all the bass, because when the volume is low, neither the bass nor the treble can be heard, so you need to turn it up a lot.

Music needs to be transparent and layered: the high notes should be clear and delicate, the midrange should be full and bright, and the bass should have a little rhythm. There is another problem, that is, when 100%, the volume cannot be turned on completely, and the maximum volume can only be turned on within 2/3; Because the power amplifier is distorted, the volume is too loud, the distortion is serious and the sound is not good.

Question 4: How to adjust the bass if it is too heavy? 5 points Double-click the speaker image or (Start, Programs, Accessories, Entertainment, Volume Control) and turn on the volume control to see the second "splash". Just turn this down ~

Question 5: How to tune the subwoofer speakers? A single subwoofer does not require tuning.

2. 1 The speaker needs to be tuned, and the volume is high. The bass is only turned on at 1/4, and the minimum volume can make the bass full.

If the bass is turned on too much, the treble will be suppressed, and if the treble is not heard, the sound will be unpleasant.

Because bass is only rhythm, tenor is the main theme, so listening to music should not only talk about rhythm, but also talk about tenor.

Question 6: How to set the speaker as long as the bass doesn't sound? If you only need bass and don't need treble, you can directly disconnect the cable of the satellite speaker.

Question 7: How to turn down the bass of the speaker If the speaker itself has no knob to adjust the bass gain, we can set the adjustment in the computer sound card driver software.

Method:

Click "Start" in the lower left corner of the desktop with the left mouse button-select control panel-select sound manager or sound manager (this step can be found in the classic view)-select equalizer or equalizer-you can see the 10 segment equalization.

At this time, the fader of each frequency band is in the middle. Click the fader with the left mouse button to adjust the gain of the initial frequency band and reduce 100 Hz and 200 Hz to-6dB. Remember to turn on the switch of the equalizer, that is, there is a check box next to the lower left corner of the equalizer interface, so you should check it.

note:

It doesn't have to be reduced by -6dB. It depends on the characteristics of your speaker and the subjective hearing of your ears to adjust its gain.

Supplement:

If you can't find the sound manager by the above methods, you can download a general sound card driver AC97, search for "AC97" in Baidu, download and install it, and then restart. The previous sound card driver can be uninstalled.

Question 8: How to tune the speaker without heavy bass? It is because of the low grade and poor quality of the speaker that the bass can't be tuned well.

If you adjust the equalizer yourself, the bass will be turned too loud, and there will be no treble in the speaker. If the treble is eaten by too much bass, the sound will be turbid and unpleasant.

The best thing is to keep the default state, and the music you hear is original music, which is relatively high-fidelity music. If you adjust it casually, the balance of music will be destroyed, so it is not original music or HiFi music.

Buy a speaker with good bass in the future, and the bass will be good.

Floor-standing speaker, good bass, price 1000.

The bookcase has a good bass and is expensive. A 40 Hz subwoofer bookcase costs more than 5,000 yuan.

Question 9: How to adjust the bass and treble of the speaker just right? The player does not move (default), only adjust the speakers.

The high volume bass is only turned on 1/4, and the medium volume is turned on 1/3, and the maximum volume can be turned on.

The treble can be the biggest.

The above is the adjustment method of 2. 1 speaker, because the bass power of 2. 1 speaker is relatively large, and the mid-high power is small. If it can't be adjusted, the sound will be turbid and unpleasant.

2.0 speakers have less bass, so the treble can be lowered appropriately, and the bass will be more prominent.

However, the circuit of 1080 reduces the treble, so this speaker can't reduce the treble, only the bass.

You don't need to adjust the sound effect when listening. The treble should be clear and delicate, the midrange should be full and bright, and the bass should have a little rhythm.

Because bass is just a rhythm, not the main theme of music, people who only listen to bass are novices who don't understand music.

Question 10: I bought a 2. 1 stereo. How to adjust the bass 2. 1 stereo? There are three knobs: master volume, treble and bass. The high and low here are all tones, not the volume of the subwoofer.