2. Shutdown: Press and hold the multifunction key for about 3 seconds in the power-on state, then the red light will light up for 3 seconds, and the hand will be released.
3. Enter the pairing mode: press and hold the multifunction key for about 7 seconds when closing, until the red and blue LED lights flash alternately.
4. The Bluetooth function of the mobile phone is turned on, select the search function, and then click the pairing name connected to the headset.
5. The mobile phone will prompt the verification code: usually 4: 0000 or 4: 8888.
6. After the connection, the earphone will give a prompt tone, and only the blue light flashes once in a while. Make a phone call to see if it's on the headset. If it is on the headset, the connection is successful.
7. If the headphones are stereo, you can also manually connect Bluetooth in the player menu, and then you can listen to music.
8. If the headset is mono, you can only make and receive calls, but you can't listen to music, but Nokia generally supports it.
Question 2: Usage of Bluetooth Headset Explain the usage of Bluetooth Headset in detail.
Many customers usually feel at a loss after buying Bluetooth headsets, and they can't understand the instructions after reading them, and many of them are in English. So we made a comprehensive arrangement here. I hope I can help you.
First, charge
The Bluetooth headset battery is not fully charged at the factory. In order to fully activate the battery, charge it for 6-8 hours for the first three times. Just charge 1-2 hours at a time. Generally, the red indicator light will be turned on when charging, and when the light goes off, it means that the battery is fully charged (individual headphones will turn blue or green when fully charged, and the instructions will prompt).
If you want to get the longest battery life, you should only charge the battery when it is low. Generally, the number of battery charges is about 500 times. That is, the normal service life is about 2 years.
Normal standby time for full charge is 2-4 days, and normal use time for telephone is 1-3 days. The more mobile phones, the shorter.
Second, the matching method
Before using the Bluetooth headset, you must pair it with your Bluetooth phone. Pairing is the process of connecting two Bluetooth devices so that they can communicate. Matching only needs to be done once. Every time you use headphones in the future, the phone will be automatically connected when it is set up. If your Bluetooth phone is paired with other Bluetooth devices, you must pair it with your phone again when you use the Bluetooth headset in the future.
At the beginning of pairing, the distance between the Bluetooth headset and the Bluetooth phone should not exceed 0.3m (within one foot).
Monophonic headphones are generally "0000" except that the pairing password of S, R35 and IIIS of Hutchison Stereo is "8888". However, some of them are specially set by the manufacturer and will be recorded in detail in your earphone manual.
The following are the matching methods of some common brands of Bluetooth headsets on the market: (You can use "CTRL+F" to search for the corresponding models. )
For pairing passwords:
Monophonic headphones are generally "0000" except that the pairing password of S, R35 and IIIS of Hutchison Stereo is "8888". However, some of them are specially set by the manufacturer and will be recorded in detail in your earphone manual.
(1) Motorola Moto
H605, H500, H3 and HT820, these four pairs are paired by pressing the function key for a long time until the indicator light turns blue (about 8 seconds) and the blue light is always on (note: it is not flashing). Then use your mobile phone to search for Bluetooth devices, and you can find your headphones. The phone will prompt for a password, usually "0000".
H700 and HS850 press and hold the multifunction key until the earphone indicator lights up (about 3 seconds). Don't let go, turn on the control handle (that is, the microphone) to turn on the long red and purple lights. This is the pairing state. The "redial" of these modes is to hold down the call button until you hear the beep.
The pairing of H670 and H60 1 can be completed by booting directly.
(2) Nokia Nokia
BH300, HS26W, BH900, BH700 and BH800: These five models can be paired when turned on, and then you can find your headphones by searching for Bluetooth devices with your mobile phone. The phone will prompt for a password, usually "0000".
Turn on HS36W first, then press and hold the power-on key and the+key at the same time for about 10 second, and the long blue light will be paired.
When BH80 1, 80 1I, 802, 803 are turned on, press and hold the volume button for 8 seconds, and the indicator light will light up for pairing.
The pairing of 54W and 55W is to confirm the power on first, and then press the+and-keys for 8 seconds at the same time, and the blue light will be on for a long time. You can pair it when you turn it on.
(3) Sony Ericsson
The four models of PV700, PV705, HBH608, HBH6 10A are paired by first confirming the startup, and at the same time pressing the volume button (about 8 seconds) to alternately flash the colors of the two lights (the lights on different machines are different).
DS970 pairing is to hold down the key for about 3 seconds, and the screen will display the search status before pairing.
IV835 pairing is to directly press the on key for 8 seconds, and the green light and red light flash alternately. This earphone can't be turned up or down, and it can only be turned up with the support of the mobile phone.
GV435 pairing is to press and hold the power button for 8 seconds, and the red and yellow lights flash alternately.
(4) Samsung Samsung
WEP200 press and hold the function key for 8 seconds until >>
Question 3: How to use the Bluetooth headset 1? It's the first time to use it. Try to charge the headset for about 2-4 hours, and then charge it for 2 hours. That's what the instructions say. It's best not to exceed 4 hours. Some forums say that the 24-hour charge is groundless. It's an exaggeration to charge such a small earphone for 24 hours.
2. Click the Bluetooth settings in the phone settings and select "Open" to finish. This will turn on the Bluetooth support of the phone.
3. When the Bluetooth headset is turned off, press and hold the headset multifunction key MFB for more than 3 seconds, until the blue light on the headset lights up (1, note that it is always on, and it lights up all the time during pairing, without flashing, and some devices flash alternately in red and blue). At this point, the Bluetooth headset is already in a searchable state.
4. Open the Bluetooth option on your phone and search. After successfully searching for the headset, the name and model of the Bluetooth headset [such as MotorolaHS 850] will be displayed in the list, and click OK.
5. Enter the password (such as 0000) on the mobile phone, and the indicator light of the earphone flashes quickly, that is, the pairing is successful.
6. Click on the Bluetooth headset name item: Motorola HS850, open it and select Bind. When finished, the phone is connected to the Bluetooth headset. At this time, the phone may have a sound similar to the connection of u *** "Ding Dong", and it may also have a similar sound when the Bluetooth headset is turned off, so it can be judged whether the Bluetooth headset and the phone are normally connected.
Question 4: How to use the ux Bluetooth headset? If paired with a mobile phone, the method is as follows:
1 The mobile phone turns on the Bluetooth search status and can be seen by any device.
If the Bluetooth headset is new, it will automatically enter the search mode when it is turned on.
(If it is the second connection, you need to press and hold the ON key of the Bluetooth headset until the red light flashes and the blue light flashes alternately before you can enter the pairing mode. )
3 After the phone displays this Bluetooth headset information, click OK to connect. The effective use distance is within 10 meter. If you need to enter a PIN code when pairing, it is generally: 0000,1234,8888.
Question 5: I bought a new Bluetooth headset. How should I use it? The use of Bluetooth for 5 minutes is actually very simple. You can connect according to the following steps.
1. When the Bluetooth headset is turned off, press and hold the headset multifunction key MFB (the largest key) for more than 5 seconds until the blue indicator light on the headset lights up (note that it is always on, and the pairing process is always on, either flashing or going out). At this time, the Bluetooth headset is turned on and can be searched.
2. Turn on the Bluetooth of the mobile phone ―― Click on the Bluetooth of the mobile phone to find the name of your Bluetooth headset ―― Select pairing (you can hear any Bluetooth headset played on the mobile phone).
3. The Bluetooth headset will have a special socket for charging (both can be charged by ordinary direct charging). For the first time, try to let the headset run for about 2-4 hours, and then charge it for 2 hours.
I hope it helps you ~ ~
Question 6: How to use Bluetooth headset? Step by step, count. As long as the Bluetooth headset is successfully connected to the mobile phone, you can answer the phone through the Bluetooth headset.
Generally speaking, there are two ways to connect a mobile phone with teeth:
The first case: the operation steps of connecting the new Bluetooth headset to the mobile phone:
1, the phone turns on the Bluetooth function. 2. Go in and search for Bluetooth status. 3. Turn on the Bluetooth switch, and the new Bluetooth will automatically enter the pairing mode. The blue light and red light of the Bluetooth headset will flash alternately, and the mobile phone will connect automatically. Note that the distance between the mobile phone and the Bluetooth headset should be within 10 meter.
The second case is the secondary connection between the mobile phone and the Bluetooth headset, and the steps are as follows:
1, the mobile phone turns on the Bluetooth function, and goes in to search the Bluetooth headset status.
2. To turn on the Bluetooth headset, you need to press and hold the answer key of the Bluetooth headset.
3. It will not be released until the indicator light: blue light and red light flashes alternately.
4. At this time, Bluetooth headset and mobile phone will be paired again.
5. Note that the distance between the mobile phone and the Bluetooth headset is 10 meter.
After this Bluetooth device is displayed on your phone, click OK to connect and use it.
Question 7: How to use Bluetooth headset? Which is the switch? It's basically universal.
check code
On the mobile phone: "turn on" the Bluetooth function and "search" the Bluetooth device. At the same time, press and hold the ON/OFF key of the Bluetooth headset (next to the handset) until the indicator light of the headset changes from red light to green light alternately, then release it and wait for pairing. When "Bluetooth" appears on the mobile phone, it means that the Bluetooth headset has been searched. Add a Bluetooth device to the mobile phone and enter the identification code "128". Indicates that the calibration was successful.
make a telephone call
After dialing, the mobile phone is connected, the earphone is automatically connected, and the call is heard.
answer the phone
After hearing the prompt tone in the headset, press the on/off key of the headset to answer the phone.
put asid
Press on/off key and hang up. It should be noted that if the other party hangs up first, press the ON/OFF key to make the headset in standby power-saving state.
Turn off the headphones
Press and hold the power off button on one side of the microphone continuously for 5 seconds to turn it off. This key is also a volume change key. Press it once in the power-on state, and the volume changes alternately, with three levels.
Turn on the headphones after pairing.
Press the on/off key on the headset for a long time, the red light will light up and release, and the code will be automatically checked with the turned-on mobile phone. Press the power button. There is no need to check the code when the paired headset is restarted.
be dressed
Just like wearing glasses, insert the earphone hook from the root of the ear and let the microphone press the auricle.
expense
Open the plastic sheet on the side of the earphone and you will see that the charging is empty.
Question 8: How can I buy a new Bluetooth headset? If I press the power button of the earphone for a long time, the red light will come on. At this time, the headset status is that the paired mobile phone can be directly connected. If you don't release the power button and continue to press it, the indicator light will turn red and blue and flash alternately. At this point, you can search the headset status and pair it. When the mobile phone is paired with this headset for the first time, you need to press the power button of the headset until the red and blue lights flash alternately and then release, and the mobile phone can be connected. When connected, the headset can be used to make calls, but if you want to listen to songs, you need to use stereo Bluetooth headset. If it is a mono Bluetooth headset, you can install super_bt_mono_froyo_pro software on your mobile phone to play music.
Question 9: How to use 1 for Samsung Bluetooth headset? Power on: When the phone is turned off, press and hold the multifunction key for about 3 seconds, then the blue light will light up for 3 seconds, and then release your hand. Power off: Press the multifunction key for about 3 seconds when the phone is turned on, then the red light will light up for 3 seconds, and then release your hand. Enter the pairing mode: when the phone is turned off, press and hold the multifunction key for about 7 seconds until the red and blue LED lights flash alternately. 4. Turn on the Bluetooth function of the mobile phone, select the search function, and find the pairing name of 5. The mobile phone will prompt the verification code: usually 4: 0000 or 4: 88886. After the connection, the earphone will sound a prompt, and only the blue light will flash once in a while. Make a phone call to see if it's on the headset. If the headset shows that you have successfully connected. 7. If the headphones are stereo, you can also manually connect Bluetooth in the player menu, and then you can listen to music.
Question 10: How to use Bluetooth headset! I picked up one. Does my mobile phone work? As long as the mobile phone comes with a Bluetooth device, the version of the Bluetooth headset is higher than that of the mobile phone.
The matching connection method is as follows:
1. When the headset is turned on, the headset will have a voice prompt to automatically search for devices that can be paired. At this time, turn on the Bluetooth device of the mobile phone.
2. The mobile phone can turn on detectability, that is, it can detect nearby Bluetooth signals. Then search for nearby Bluetooth signals. After finding the Bluetooth headset (usually the model of the Bluetooth headset will be displayed), click Connect. If you are prompted for a password, the default value is 0000. After entering the password, you can connect successfully.
3. Bluetooth headset has been paired before. If you want to change and connect other mobile devices, you need to pair them manually. After finding the multifunction key, press and hold the multifunction key 8 for about two seconds with the headset turned off, and the red and green indicator lights will flash alternately, indicating that the Bluetooth headset has entered the pairing state, and then the mobile phone will search for the Bluetooth signal and then connect.
4. If the Bluetooth headset is successfully paired with the mobile device, when the Bluetooth headset is turned on and the mobile device is turned on at the same time, the blue display light of the Bluetooth headset will blink slowly, indicating that the Bluetooth headset is automatically connected with the mobile device. When the phone calls, you can answer the call by pressing the multifunction key of the Bluetooth headset.