What should be paid attention to for concrete curing agent?

1. Surface coating (such as wax layer, curing agent, resin coating, etc.). ) and oil pollution should be removed from the old ground first. On the ground with heavy oil pollution, the high permeability sealing curing agent must be properly treated before construction;

2. Construction temperature: 2℃

3. The packaging barrel shall be sealed and stored above 0℃, and the storage period is not limited. If there is turbidity, shake well before use;

4. Check whether the package is complete and sealed during transportation. If there is any leakage, rinse it with plenty of water;

5. This product is non-corrosive, non-toxic and tasteless; But be careful not to soak in high-permeability seal curing agent for a long time to avoid children's contact.

References:

www.qdhmgm.com

key property

Analysis of product characteristics of concrete sealing curing agent cs;

1. The sealing curing agent of concrete has strong permeability on the concrete layer, which can effectively react with calcium and magnesium compounds in concrete, thus forming nano-silica composite colloid and finally curing, sealing the pores on the surface of concrete, and changing the porosity and strong alkalinity of surface concrete, making it lose its reactivity with acidic corrosive substances.

2. The concrete sealing curing agent can prevent concrete from weathering, dust and sand, and increase its wear resistance, hardness and compactness.

3. The concrete sealing curing agent is pollution-free, colorless, tasteless and nonflammable. It has good environmental protection and sustainability.

4. The compressive strength and impermeability of concrete are particularly prominent among sealing curing agents. After concrete is constructed in sealing curing agent, the compressive strength of the ground is greatly improved, which can effectively inhibit water, oil and other surface pollutants from entering the concrete.

5. The gloss of the sealing curing agent of concrete is greatly increased, and the ground after polishing can reach the gloss of marble floor, which increases the brightness of indoor environment.

6, the anti-slip effect is obvious. Ordinary concrete ground salt, leading to slip. The sealing curing agent of concrete is different, because it forms a solid and dense entity on the surface of concrete, and the saline-alkali components will not precipitate from the surface.

Qingdao He Mei Industry & Trade Clean Equipment Co., Ltd.