Dock the box with a wire of the wifi connection interface under the air conditioner, turn it on, download the Kelon intelligent module mobile phone app, and follow the steps of the app program. On the premise that wireless wifi must be installed at home, press the left and right swing button on the remote control 6 times to enter the quick connection mode, and you can connect in the app. The same is true for WeChat controls.
1. After the installation location is determined, the packing box can be installed and opened. If you need to follow in the building, you need to make some simple appointments for air conditioning.
2. Fix the installed bracket, fix the installed bracket to the pre-reserved position, and then conduct preliminary proofreading with a level meter. At this time, we should pay attention to the position. Generally, the lateral side is about 10 mm lower than the medial side.
3. Remove the panel, air filter and site fixing plate. In this way, the outer box of the air conditioner can be installed on the bracket to ensure that the water nozzle can discharge water normally.
4. Then check whether the air conditioner is installed horizontally with a level meter. At this time, it should be noted that the base must be flat. If the installation is uneven, the air conditioner will make a lot of noise.
5. Install the air filter and further fix the panel.
6. Check whether these entrances and exits are partially congested and keep them unblocked. However, some small parts will be installed, such as drainage pipes and grounding wires.